summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)Author
2017-07-14Test cleaning and modernisationPauli
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3917)
2017-07-14Fix some issues raise by coverity in the tests.Pauli
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3846)
2017-07-13Add sanity test for certificate tableDr. Stephen Henson
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3858)
2017-07-13Add additional ECDSA/Ed25519 selection tests.Dr. Stephen Henson
Add two tests with ECDSA+SHA256 preferred over Ed25519, the second also excludes P-256 from the supported curves extension which will force the use of Ed25519 in TLS 1.2, but not TLS 1.3: this would fail before the certificate table updates. Add TLS 1.3 test also with P-256 exclude from the groups extension: this should have no effect as the groups extension is not used for signature selection in TLS 1.3 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3858)
2017-07-07Do not allow non-dhe kex_modes by defaultMatt Caswell
Allow that mode to be configured if desired. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3833)
2017-07-07Update the test/session.pem to have a tick_nonce valueMatt Caswell
Otherwise the ClientHello test fails Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
2017-07-07Update tls13_hkdf_expand() to take the length of the dataMatt Caswell
In most scenarios the length of the input data is the hashsize, or 0 if the data is NULL. However with the new ticket_nonce changes the length can be different. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
2017-07-07The correct key length for a TLSv1.3 SHA384 ciphersuite is 48Matt Caswell
Our test was using 32. The latest ticket nonce changes now validate this value and so sslapitest was failing. Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3852)
2017-07-07test/run_tests.pl: Make sure to exit with a code that's understood universallyRichard Levitte
TAP::Parser::Aggregator::has_errors may return any number, not just 0 and 1. With Perl on VMS, any number from 2 and on is interpreted as a VMS status, the 3 lower bits are the encoded severity (1 = SUCCESS, for example), so depending on what has_errors returns, a test failure might be interpreted as a success. Therefore, it's better to make sure the exit code is 0 or 1, nothing else (they are special on VMS, and mean SUCCESS or FAILURE, to match Unix conventions). Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880)
2017-07-07test/recipes/90-test_shlibload.t: Make sure to handle library renamesRichard Levitte
VMS renames our libraries to fit VMS conventions. This must be accounted for when we want to load them. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880)
2017-07-05Fix compiler warningsPauli
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3839)
2017-07-05Remove the TEST_check macro.Pauli
This macro aborted the process which stopped any later tests from running. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3838)
2017-07-03BN_pseudo_rand is really BN_randRich Salz
And BN_pseudo_rand_range is really BN_rand_range. Document that we might deprecate those functions. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3743)
2017-07-03Remove the possibility to disable the UI module entirelyRichard Levitte
Instead, make it possible to disable the console reader that's part of the UI module. This makes it possible to use the UI API and other UI methods in environments where the console reader isn't useful. To disable the console reader, configure with 'no-ui-console' / 'disable-ui-console'. 'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' / 'disable-ui-console'. Fixes #3806 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3820)
2017-06-30Cleanup some copyright stuffRich Salz
Remove some incorrect copyright references. Move copyright to standard place Add OpenSSL copyright where missing. Remove copyrighted file that we don't use any more Remove Itanium assembler for RC4 and MD5 (assembler versions of old and weak algorithms for an old chip) Standardize apps/rehash copyright comment; approved by Timo Put dual-copyright notice on mkcert Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3691)
2017-06-30Fix build with no-threads no-ecDr. Stephen Henson
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3817)
2017-06-29STORE test recipe: Remove comment refering to OpenConnectRichard Levitte
These tests were inspired by OpenConnect and incorporated by permission of David Woodhouse under CLA Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3542)
2017-06-29Test that storeutl with a directory path works as expectedRichard Levitte
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3542)
2017-06-29STORE tests: add PKCS#12 testsRichard Levitte
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3542)
2017-06-29Add a test that checks the store utilityRichard Levitte
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3542)
2017-06-29Updates following review of SSL_export_key_material() changesMatt Caswell
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3782)
2017-06-29Add an SSL_export_keying_material() testMatt Caswell
There aren't any test vectors for this, so all we do is test that both sides of the communication create the same result for different protocol versions. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3782)
2017-06-28Add dependency on apps/progs.h for test/uitest.oRichard Levitte
uitest.o depends on apps.h which depends on progs.h, which is dynamically generated, so we need to explicitely add a dependency between uitest.o and progs.h for the latter to be generated in time. Fixed #3793 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3794)
2017-06-28test/uitest.c's pem_password_cb returned 1 instead of the password lengthRichard Levitte
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3791)
2017-06-27Use randomness not entropyRich Salz
Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3773)
2017-06-26Fix return value checking for BIO_sock_initPaul Yang
BIO_sock_init returns '-1' on error, not '0', so it's needed to check explicitly istead of using '!'. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/3766)
2017-06-24Fix no-dsa build againBenjamin Kaduk
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3762)
2017-06-24Add tests for deprecated sigalgs with TLS 1.3 ClientHellosBenjamin Kaduk
Test for each of DSA, SHA1, and SHA224. Use the symbolic names for SignatureScheme comparisons just added. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3326)
2017-06-24Fix no-dsa buildBenjamin Kaduk
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3326)
2017-06-23Fix a memory leak in the new TAP filter BIOMatt Caswell
[extended tests] Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3760)
2017-06-23Fix the constant time 64 testMatt Caswell
We were adding more tests than we had data for due to use of sizeof instead of OSSL_NELEM. I also changed the 8 bit tests for consistency, although they were already working. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3755)
2017-06-23Remove uses of the TEST_check macro.Pauli
This macro aborts the test which prevents later tests from executing. It also bypasses the test framework output functionality. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3750)
2017-06-22TAP line filter BIO.Pauli
This is an implementation of a BIO filter that produce TAP compatible output for the test framework. The current test indentation level is honoured. The test output functions have been modified to not attempt to indent their output and to not include the leading '#' character. The filter is applied to bio_err only. bio_out is left unchanged, although tests using bio_out have been modified to use bio_err instead. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3732)
2017-06-21PSK related tweaks based on review feedbackMatt Caswell
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3670)
2017-06-21Add some tests for the new TLSv1.3 PSK codeMatt Caswell
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3670)
2017-06-21Add ecstress testRich Salz
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3720)
2017-06-21Add constant-time 64Rich Salz
Standardize comments. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3727)
2017-06-21Update test config fileDr. Stephen Henson
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3585)
2017-06-21Add Ed25519 TLS 1.3 and 1.2 testsDr. Stephen Henson
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3585)
2017-06-21Add Ed25519 EE certificatesDr. Stephen Henson
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3585)
2017-06-21Ed25519 support for mkcert.shDr. Stephen Henson
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3585)
2017-06-21Merge Nokia copyright notice into standardRich Salz
This is done with the kind permission of Nokia. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3722)
2017-06-21Remove OSSLzu macros and use %zu in the test framework (via BIO_printf).Pauli
Convert the debug prints in dtls_mtu_test.c to use the framework. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3730)
2017-06-20Modify Sun copyright to follow OpenSSL styleRich Salz
Approved by Oracle. Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/3585)
2017-06-19Address style issues.Pauli
Refactor count -> c which makes the for loop more readable. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3710)
2017-06-19Address double error and OSSLzu comments.Pauli
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3710)
2017-06-19Put error output back.Pauli
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3710)
2017-06-19Update tests to avoid printf to stdout/stderr when running as test cases.Pauli
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3710)
2017-06-19Fix preprocessor indentation.Pauli
Rework main() to be in the style of the other conditional tests. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3711)
2017-06-17Fix va_list processing in test_note()Richard Levitte
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3704)
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 00:55:35 +0000