Age | Commit message (Collapse) | Author |
|
The logic testing whether a CKE message is allowed or not was a little
difficult to follow. This tries to clean it up.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
The static function key_exchange_expected() used to return -1 on error.
Commit 361a119127 changed that so that it can never fail. This means that
some tidy up can be done to simplify error handling in callers of that
function.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Having received a ClientKeyExchange message instead of a Certificate we
know that we are not going to receive a CertificateVerify message. This
means we can free up the handshake_buffer. However we better call
ssl3_digest_cached_records() instead of just freeing it up, otherwise we
later try and use it anyway and a core dump results. This could happen,
for example, in SSLv3 where we send a CertificateRequest but the client
sends no Certificate message at all. This is valid in SSLv3 (in TLS
clients are required to send an empty Certificate message).
Found using the BoringSSL test suite.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
In TLS if the server sends a CertificateRequest and the client does not
provide one, if the server cannot continue it should send a
HandshakeFailure alert. In SSLv3 the same should happen, but instead we
were sending an UnexpectedMessage alert. This is incorrect - the message
isn't unexpected - it is valid for the client not to send one - its just
that we cannot continue without one.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Move the preparation of the client certificate to be post processing work
after reading the CertificateRequest message rather than pre processing
work prior to writing the Certificate message. As part of preparing the
client certificate we may discover that we do not have one available. If
we are also talking SSLv3 then we won't send the Certificate message at
all. However, if we don't discover this until we are about to send the
Certificate message it is too late and we send an empty one anyway. This
is wrong for SSLv3.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1313)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The set0 setters take ownership of their arguments, so the values should
be set to NULL to avoid a double-free in the cleanup block should
ssl_security(SSL_SECOP_TMP_DH) fail. Found by BoringSSL's WeakDH test.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1299)
|
|
In light of potential UKS (unknown key share) attacks on some
applications, primarily browsers, despite RFC761, name checks are
by default applied with DANE-EE(3) TLSA records. Applications for
which UKS is not a problem can optionally disable DANE-EE(3) name
checks via the new SSL_CTX_dane_set_flags() and friends.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Commit aea145e removed some error codes that are generated
algorithmically: mapping alerts to error texts. Found by
Andreas Karlsson. This restores them, and adds two missing ones.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
The SSL_load_client_CA_file() failed to load any CAs due to an
inccorrect assumption about the return value of lh_*_insert(). The
return value when inserting into a hash is the old value of the key.
The bug was introduced in 3c82e437bb3af822ea13cd5a24bab0745c556246.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1279)
|
|
We calculate the size required for the ServerKeyExchange message and then
call BUF_MEM_grow_clean() on the buffer. However we fail to take account of
2 bytes required for the signature algorithm and 2 bytes for the signature
length, i.e. we could overflow by 4 bytes. In reality this won't happen
because the buffer is pre-allocated to a large size that means it should be
big enough anyway.
Addresses an OCAP Audit issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
|
|
In some situations (such as when we receive a fragment of an alert)
we try to get the next packet but did not mark the current one as read,
meaning that we got the same record back again - leading to an infinite
loop.
Found using the BoringSSL test suite.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1245)
|
|
Using RSA_PKCS1_PADDING with RSA_private_decrypt is inherently unsafe.
The API requires writing output on success and touching the error queue
on error. Thus, although the padding check itself is constant-time as of
294d1e36c2495ff00e697c9ff622856d3114f14f, and the logic after the
decryption in the SSL code is constant-time as of
adb46dbc6dd7347750df2468c93e8c34bcb93a4b, the API boundary in the middle
still leaks whether the padding check succeeded, giving us our
much-loved Bleichenbacher padding oracle.
Instead, PKCS#1 padding must be handled by the caller which uses
RSA_NO_PADDING, in timing-sensitive code integrated with the
Bleichenbacher mitigation. Removing PKCS#1 padding in constant time is
actually much simpler when the expected length is a constant (and if
it's not a constant, avoiding a padding oracle seems unlikely), so just
do it inline.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1222
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)
|
|
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
ssl_session_hash() always looks at the first 4 bytes, regardless of the length.
A client can send a session id that's shorter, and the callback could also
generate one that's shorter. So we make sure that the rest of the buffer is
initliazed to 0 so that we always calculate the same hash.
Found by tis-interpreter, also previously reported as RT #2871
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #2911
|
|
Fix a comment following commit c2c49969e23605.
RT2388
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Some misc return value checks
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
SSL_clear() and SSL_free() will remove a session from the cache if it is
considered "bad". However SSL_set_session() does not do this for the session
it is replacing.
SSL_clear() clears an SSL object ready for reuse. It does not clear the
session though. This means that:
SSL_clear(s)
SSL_set_session(s, sess);
and
SSL_set_session(s, sess);
SSL_clear(s);
do not do the same thing, although logically you would expect that they
would.
The failure of SSL_set_session() to remove bad sessions from the cache
should be considered a bug, so this commit fixes it.
RT#597
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Found by tis-interpreter
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1173
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
|
|
GH1098: Add X509_get_pathlen() (and a test)
GH1097: Add SSL_is_dtls() function.
Documented.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Sessions are stored on the session_ctx, which doesn't change after
SSL_set_SSL_CTX().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Previously if we received an empty record we just threw it away and
ignored it. Really though if we get an empty record of a different content
type to what we are expecting then that should be an error, i.e. we should
reject out of context empty records. This commit makes the necessary changes
to achieve that.
RT#4395
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
The number of read pipelines should be reset in the event of reuse of an
SSL object.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The tlsext_status_type field in SSL is used by e.g. OpenResty to determine
if the client requested the certificate status, but SSL is now opaque.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The ssl3_init_finished_mac() function can fail, in which case we need to
propagate the error up through the stack.
RT#3198
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1135)
|
|
accompanying documentation.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1135)
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
When setting the certificate chain, if a certificate doesn't pass
security checks, then chain may point to a freed STACK_OF(X509)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Windows was complaining about a unary minus operator being applied to an
unsigned type. It did seem to go on and do the right thing anyway, but the
code does look a little suspect. This fixes it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
The ssl3_digest_cached_records() function was failing to handle errors
that might be returned from EVP_DigestSignInit() and
EVP_DigestSignUpdate().
RT#4180
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Add script to find unused err/reason codes
Remove unused reason codes.
Remove entries for unused functions
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
from BoringSSL 306ece31bcaaed49e0240a2e5555f8901ebb2d45
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Rename sk_xxx to OPENSSL_sk_xxx and _STACK to OPENSSL_STACK
Rename lh_xxx API to OPENSSL_LH_xxx and LHASH_NODE to OPENSSL_LH_NODE
Make lhash stuff opaque.
Use typedefs for function pointers; makes the code simpler.
Remove CHECKED_xxx macros.
Add documentation; remove old X509-oriented doc.
Add API-compat names for entire old API
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
In the new state machine if using nbio and we get the header of a
handshake message is one record with the body in the next, with an nbio
event in the middle, then the connection was failing. This is because
s->init_num was getting reset. We should only reset it after we have
read the whole message.
RT#4394
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
ChangeCipherSpec messages have a defined value. They also may not occur
in the middle of a handshake message. The current logic will accept a
ChangeCipherSpec with value 2. It also would accept up to three bytes of
handshake data before the ChangeCipherSpec which it would discard
(because s->init_num gets reset).
Instead, require that s->init_num is 0 when a ChangeCipherSpec comes in.
RT#4391
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
The write BIO for handshake messages is bufferred so that we only write
out to the network when we have a complete flight. There was some
complexity in the buffering logic so that we switched buffering on and
off at various points through out the handshake. The only real reason to
do this was historically it complicated the state machine when you wanted
to flush because you had to traverse through the "flush" state (in order
to cope with NBIO). Where we knew up front that there was only going to
be one message in the flight we switched off buffering to avoid that.
In the new state machine there is no longer a need for a flush state so
it is simpler just to have buffering on for the whole handshake. This
also gives us the added benefit that we can simply call flush after every
flight even if it only has one message in it. This means that BIO authors
can implement their own buffering strategies and not have to be aware of
the state of the SSL object (previously they would have to switch off
their own buffering during the handshake because they could not rely on
a flush being received when they really needed to write data out). This
last point addresses GitHub Issue #322.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Since with SSL_VERIFY_NONE, the connection may continue and the
session may even be cached, we should save some evidence that the
chain was not sufficiently verified and would have been rejected
with SSL_VERIFY_PEER. To that end when a CT callback returs failure
we set the verify result to X509_V_ERR_NO_VALID_SCTS.
Note: We only run the CT callback in the first place if the verify
result is still X509_V_OK prior to start of the callback.
RT #4502
Reviewed-by: Tim Hudson <tjh@openssl.org>
|