| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11709)
|
|
This API requests that the TLS stack generate a (TLS 1.3)
NewSessionTicket message the next time it is safe to do so (i.e., we do
not have other data pending write, which could be mid-record). For
efficiency, defer actually generating/writing the ticket until there
is other data to write, to avoid producing server-to-client traffic when
not needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)
|
|
An 'if' clause was nestled against a previous closing brace as it if was
an 'else if', but should properly stand on its own line.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)
|
|
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)
|
|
We had a spot where a fatal error was occurring but we hadn't sent an
alert. This results in a later assertion failure.
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11537)
|
|
Libssl is OPENSSL_CTX aware so we should use it when creating an
X509_STORE_CTX.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11457)
|
|
The transfer of TLS encodedpoint to backends isn't yet fully supported
in provider implementations. This is a temporary measure so as not to
get stuck in other development.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11358)
|
|
libssl code uses EVP_PKEY_get0_EC_KEY() to extract certain basic data
from the EC_KEY. We replace that with internal EVP_PKEY functions.
This may or may not be refactored later on.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11358)
|
|
We need to make sure we use the correct libctx for all operations in
libssl.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11401)
|
|
Having created a DH object and assigned it to an EVP_PKEY - we should
not free both the EVP_PKEY and the original DH. This will lead to a
double free occurring.
This issue was discovered and reported by GitHub Security Lab team member
Agustin Gianni.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11441)
|
|
We use AES-256-CBC to encrypt stateless session tickets. We should
ensure that the implementation is fetched from the appropriate provider.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11356)
|
|
We use the SHA256 digest of the ticket as a "fake" session id. We should
ensure that the SHA256 implementation is fetched from the appropriate
provider.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11356)
|
|
When constructing an RSA ClientKeyExchange make sure we construct our
EVP_PKEY_CTX using the correct libctx and properties
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11357)
|
|
The server-side ChangeCipherState processing stores the new cipher
in the SSL_SESSION object, so that the new state can be used if
this session gets resumed. However, writing to the session is only
thread-safe for initial handshakes, as at other times the session
object may be in a shared cache and in use by another thread at the
same time. Reflect this invariant in the code by only writing to
s->session->cipher when it is currently NULL (we do not cache sessions
with no cipher). The code prior to this change would never actually
change the (non-NULL) cipher value in a session object, since our
server enforces that (pre-TLS-1.3) resumptions use the exact same
cipher as the initial connection, and non-abbreviated renegotiations
have produced a new session object before we get to this point.
Regardless, include logic to detect such a condition and abort the
handshake if it occurs, to avoid any risk of inadvertently using
the wrong cipher on a connection.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
|
|
TLS 1.3 maintains a separate keys chedule in the SSL object, but
was writing to the 'master_key_length' field in the SSL_SESSION
when generating the per-SSL master_secret. (The generate_master_secret
SSL3_ENC_METHOD function needs an output variable for the master secret
length, but the TLS 1.3 implementation just uses the output size of
the handshake hash function to get the lengths, so the only natural-looking
thing to use as the output length was the field in the session.
This would potentially involve writing to a SSL_SESSION object that was
in the cache (i.e., resumed) and shared with other threads, though.
The thread-safety impact should be minimal, since TLS 1.3 requires the
hash from the original handshake to be associated with the resumption
PSK and used for the subsequent connection. This means that (in the
resumption case) the value being written would be the same value that was
previously there, so the only risk would be on architectures that can
produce torn writes/reads for aligned size_t values.
Since the value is essentially ignored anyway, just provide the
address of a local dummy variable to generate_master_secret() instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10943)
|
|
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
|
|
When we use an EVP_PKEY_CTX in libssl we should be doing so with the
OPENSSL_CTX and property query string that were specified when the
SSL_CTX object was first created.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
|
|
We modify libssl to use explicitly fetched ciphers, digests and other
algorithms as required based on the configured library context and
property query string for the SSL_CTX that is being used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
|
|
If the servername cb decides to send back a warning alert then the
handshake continues, but we should not signal to the client that the
servername has been accepted.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
|
|
The SNI behaviour for TLSv1.3 and the behaviour of SSL_get_servername()
was not quite right, and not entirely consistent with the RFC.
The TLSv1.3 RFC explicitly says that SNI is negotiated on each handshake
and the server is not required to associate it with the session. This was
not quite reflected in the code so we fix that.
Additionally there were some additional checks around early_data checking
that the SNI between the original session and this session were
consistent. In fact the RFC does not require any such checks, so they are
removed.
Finally the behaviour of SSL_get_servername() was not quite right. The
behaviour was not consistent between resumption and normal handshakes,
and also not quite consistent with historical behaviour. We clarify the
behaviour in various scenarios and also attempt to make it match historical
behaviour as closely as possible.
Fixes #8822
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10018)
|
|
Backwards compatibility with the old ticket key call back is maintained.
This will be removed when the low level HMAC APIs are finally removed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10836)
|
|
Now that libssl knows about libctx we should use it wherever we generate
a random number.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10927)
|
|
Some uses were going against documented recommendations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10798)
|
|
Large GOST ClientKeyExchange messages are sent by VipNet CSP, one of
Russian certified products implementing GOST TLS, when a server
certificate contains 512-bit keys.
This behaviour was present in 1.0.2 branch and needs to be restored.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10376)
|
|
Server side RSA key transport code in a Client Key Exchange message
currently uses constant time code to check that the RSA decrypt is
correctly formatted. The previous commit taught the underlying RSA
implementation how to do this instead, so we use that implementation and
remove this code from libssl.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10411)
|
|
As was done for ciphers, supported groups, and EC point formats in
https://github.com/openssl/openssl/pull/9162, only write the negotiated
SNI hostname value to the session object when not resuming, even for
TLS 1.3 resumptions. Otherwise, when using a stateful session cache
(as is done by default when 0-RTT data is enabled), we can have multiple
SSLs active using the same in-memory session object, which leads to
double-frees and similar race conditions in the SNI handler prior
to this commit.
Fortunately, since draft-ietf-tls-tls13-22, there is no requirement
that the SNI hostname be preserved across TLS 1.3 resumption, and thus
not a need to continually update the session object with the "current"
value (to be used when producing session tickets, so that the subsequent
resumption can be checked against the current value). So we can just
relax the logic and only write to the session object for initial handshakes.
This still leaves us in a somewhat inconsistent state, since if the SNI value
does change across handshakes, the session object will continue to record
the initial handshake's value, even if that bears no relation to the
current handshake. The current SSL_get_servername() implementation
prefers the value from the session if s->hit, but a more complete fix
for that and related issues is underway in
https://github.com/openssl/openssl/pull/10018; there is no need to wait
for the complete fix for SNI name handling in order to close the
race condition and avoid runtime crashes.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10441)
|
|
The resumption_label variable when CHARSET_EBCDIC was enabled, was misspelled.
Instead of evaluating to 'res binder' as expected, it evaluated to 'red binder'.
CLA: trivial
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10396)
|
|
instead of char pointers to fix EBCDIC builds.
Fixes #9869
CLA:trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9878)
(cherry picked from commit d8e8ed0220f0656a6e7e384ef4d7e1757b48fd95)
|
|
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9653)
|
|
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
|
|
If a TLSv1.3 server configured to respond to the status_request extension
also attempted to send a CertificateRequest then it was incorrectly
inserting a non zero length status_request extension into that message.
The TLSv1.3 RFC does allow that extension in that message but it must
always be zero length.
In fact we should not be sending the extension at all in that message
because we don't support it.
Fixes #9767
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9780)
|
|
Fix a few places where calling ossl_isdigit does the wrong thing on
EBCDIC based systems.
Replaced with ascii_isdigit.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9556)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9471)
|
|
If compiled with 'no-deprecated', ERR_put_error() is undefined. We
had one spot where we were using it directly, because the file and
line information was passed from elsewhere.
Fortunately, it's possible to use ERR_raise() for that situation, and
call ERR_set_debug() immediately after and thereby override the
information that ERR_raise() stored in the error record.
util/mkerr.pl needed a small adjustment to not generate code that
won't compile in a 'no-deprecated' configuration.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9452)
|
|
tls_parse_stoc_key_share was generating a new EVP_PKEY public/private
keypair and then overrides it with the server public key, so the
generation was a waste anyway. Instead, it should create a
parameters-only EVP_PKEY.
(This is a consequence of OpenSSL using the same type for empty key,
empty key with key type, empty key with key type + parameters, public
key, and private key. As a result, it's easy to mistakenly mix such
things up, as happened here.)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9445)
|
|
Some have been creeping into the source code.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/9397)
|
|
Deprecate all xxx_F_ defines.
Removed some places that tested for a specific function.
Use empty field for the function names in output.
Update documentation.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9058)
|
|
This reverts commit 524006dd1b80c1a86a20119ad988666a80d8d8f5.
While this change did prevent the sigalgs from getting inadvertently
clobbered by SSL_set_SSL_CTX(), it also caused the sigalgs to not be
set when the cert_cb runs. This, in turn, caused significant breakage,
such as SSL_check_chain() failing to find any valid chain. An alternate
approach to fixing the issue from #7244 will follow.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9157)
|
|
The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
|
|
Similarly to the previous commit we were storing the peer offered list
of ciphers in the session. In practice there is no need for this
information to be avilable from one resumption to the next since this
list is specific to a particular handshake. Since the session object is
supposed to be immutable we should not be updating it once we have decided
to resume. The solution is to remove the session list out of the session
object.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
|
|
In TLSv1.3 the supported groups can be negotiated each time a handshake
occurs, regardless of whether we are resuming or not. We should not store
the supported groups information in the session because session objects
can be shared between multiple threads and we can end up with race
conditions. For most users this won't be seen because, by default, we
use stateless tickets in TLSv1.3 which don't get shared. However if you
use SSL_OP_NO_TICKET (to get stateful tickets in TLSv1.3) then this can
happen.
The answer is to move the supported the supported group information into
the SSL object instead.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)
|
|
Make sure that the combination of no-ec with no-dh builds successfully.
If neither ec or dh are available then TLSv1.3 is not possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
|
|
Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.
It also fixes no-ec which was previously broken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8178)
|
|
This is still required currently by engines and digestsign/digestverify.
This PR contains merged in code from Richard Levitte's PR #9126.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9103)
|
|
Move digest code into the relevant providers (fips, default, legacy).
The headers are temporarily moved to be internal, and will be moved
into providers after all external references are resolved. The deprecated
digest code can not be removed until EVP_PKEY (signing) is supported by
providers. EVP_MD data can also not yet be cleaned up for the same reasons.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8763)
|
|
If we receive a KeyUpdate message (update requested) from the peer while
we are in the middle of a write, we should defer sending the responding
KeyUpdate message until after the current write is complete. We do this
by waiting to send the KeyUpdate until the next time we write and there is
no pending write data.
This does imply a subtle change in behaviour. Firstly the responding
KeyUpdate message won't be sent straight away as it is now. Secondly if
the peer sends multiple KeyUpdates without us doing any writing then we
will only send one response, as opposed to previously where we sent a
response for each KeyUpdate received.
Fixes #8677
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8773)
|
|
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
|
