| Age | Commit message (Collapse) | Author |
|---|
|
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
|
|
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3858)
|
|
We are quite inconsistent about which alerts get sent. Specifically, these
alerts should be used (normally) in the following circumstances:
SSL_AD_DECODE_ERROR = The peer sent a syntactically incorrect message
SSL_AD_ILLEGAL_PARAMETER = The peer sent a message which was syntactically
correct, but a parameter given is invalid for the context
SSL_AD_HANDSHAKE_FAILURE = The peer's messages were syntactically and
semantically correct, but the parameters provided were unacceptable to us
(e.g. because we do not support the requested parameters)
SSL_AD_INTERNAL_ERROR = We messed up (e.g. malloc failure)
The standards themselves aren't always consistent but I think the above
represents the best interpretation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3480)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)
|
|
SSL_CTX_use_serverinfo_ex() et al were always processing data as if it was
V2 format, even if it was V1. This bug was masked because, although we had
a test which loaded V1 serverinfo data from a file, the function
SSL_CTX_use_serverinfo_file() transparently converts V1 data to V2 before
calling SSL_CTX_use_serverinfo_ex().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)
|
|
This reverts commit 1608d658af4163d2096cb469705d4ba96067877b.
This is the wrong fix for this issue. The next commit provides a better
fix.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)
|
|
|version| "could" be used uninitialized here, not really, but the
compiler doesn't understand the flow
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3373)
|
|
Ensure that serverinfo only gets added for the first Certificate in a list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
|
|
This enables us to know what messages the extensions are relevant for in
TLSv1.3. The new file format is not compatible with the previous one so
we call it SERVERINFOV2.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)
|
|
We need it for the custom extensions API
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
|
|
The old custom extensions API was not TLSv1.3 aware. Extensions are used
extensively in TLSv1.3 and they can appear in many different types of
messages. Therefore we need a new API to be able to cope with that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)
|
|
... in functions dealing with the SSL object rather than the context.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2870)
|
|
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
These functions are:
SSL_use_certificate_file
SSL_use_RSAPrivateKey_file
SSL_use_PrivateKey_file
SSL_CTX_use_certificate_file
SSL_CTX_use_RSAPrivateKey_file
SSL_CTX_use_PrivateKey_file
SSL_use_certificate_chain_file
Internally, they use BIO_s_file(), which is defined and implemented at
all times, even when OpenSSL is configured no-stdio.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1313)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
RT#4403
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
If no serverinfo extension is found in some cases, do not abort the handshake,
but simply omit/skip that extension.
Check for already-registered serverinfo callbacks during serverinfo
registration.
Update SSL_CTX_use_serverinfo() documentation to mention the need to reload the
same serverinfo per certificate, for servers with multiple server certificates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add X25519 to TLS supported curve list.
Reject attempts to configure keys which cannot be used
for signing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Remove all fixed DH ciphersuites and associated logic.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The new function SSL_use_certificate_chain_file was always crashing in
the internal function use_certificate_chain_file because it would pass a
NULL value for SSL_CTX *, but use_certificate_chain_file would
unconditionally try to dereference it.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1128
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add SSL_use_certiicate_chain file functions: this is works the same
way as SSL_CTX_use_certificate_chain_file but for an SSL structure.
Update SSL_CONF code to use the new function.
Update docs.
Update ordinals.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free
BIO_free BIO_free_all BIO_vfree
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
It created the cert structure in SSL_CTX or SSL if it was NULL, but they can
never be NULL as the comments already said.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
realloc(ctx->cert->key->serverinfo) and don't leak memory if it fails
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Instead of SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_srv_ext
use SSL_CTX_add_client_custom_ext and SSL_CTX_add_server_custom_ext.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Support separate parse and add callback arguments.
Add new callback so an application can free extension data.
Change return value for send functions so < 0 is an error 0
omits extension and > 0 includes it. This is more consistent
with the behaviour of other functions in OpenSSL.
Modify parse_cb handling so <= 0 is an error.
Make SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_cli_ext argument
order consistent.
NOTE: these changes WILL break existing code.
Remove (now inaccurate) in line documentation.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Use "parse" and "add" for function and callback names instead of
"first" and "second".
Change arguments to callback so the extension type is unsigned int
and the buffer length is size_t. Note: this *will* break existing code.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Since sanity checks are performed for all custom extensions the
serverinfo checks are no longer needed.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
