| Age | Commit message (Collapse) | Author |
|---|
|
Simplifies calling code. Also fixed up any !ptr tests that were
nearby, turning them into NULL tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
The ssl_set_masks() function no longer depends on the cipher. This
also means there is no need to set the masks for each cipher in
ssl3_choose_cipher.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
As handshake_func is a function pointer, it should compare to NULL
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Add utility macros REF_ASSERT_NOT and REF_PRINT_COUNT
This is also RT 4181
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Man, there were a lot of renamings :)
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Building on the pervious commit to auto initialise and de-initialise libssl
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Deprecate undocumented SSL_cache_hit(). Make SSL_session_reused() into a
real function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Previous commit 7bb196a71 attempted to "fix" a problem with the way
SSL_shutdown() behaved whilst in mid-handshake. The original behaviour had
SSL_shutdown() return immediately having taken no action if called mid-
handshake with a return value of 1 (meaning everything was shutdown
successfully). In fact the shutdown has not been successful.
Commit 7bb196a71 changed that to send a close_notify anyway and then
return. This seems to be causing some problems for some applications so
perhaps a better (much simpler) approach is revert to the previous
behaviour (no attempt at a shutdown), but return -1 (meaning the shutdown
was not successful).
This also fixes a bug where SSL_shutdown always returns 0 when shutdown
*very* early in the handshake (i.e. we are still using SSLv23_method).
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:
SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.
SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).
The command-line switch has changed from -no_comp to -comp.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This extends the existing async functionality to SSL_shutdown(), i.e.
SSL_shutdown() can now casuse an SSL_ERROR_WANT_ASYNC error to be returned
from SSL_get_error() if async mode has been enabled.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
The SSL and SSL_CTX structures are reference counted. However since libssl
was made opaque there is no way for users of the library to manipulate the
reference counts. This adds functions to enable that.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.
The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Also report an SSL_dane_enable error when the basedomain is an
invalid SNI name. Avoid side-effects when such a name is valid
with X509_VERIFY_PARAM_set1_host(), as e.g. with an empty name, by
setting the SNI name first.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
It turns out that -pause calls the undocumented function SSL_set_debug.
That just sets flag inside the SSL structure. That flag, despite
the command is never used. So remove the flag, the field, and the
function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
These now take and return unsigned long, and get is constified.
Updated related documentation and util/ssleay.num
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Remove all fixed DH ciphersuites and associated logic.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #364
|
|
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
Add CRYPTO_free_ex_index (for shared libraries)
Unify and complete the documentation for all "ex_data" API's and objects.
Replace xxx_get_ex_new_index functions with a macro.
Added an exdata test.
Renamed the ex_data internal datatypes.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Change handshake hash array into a single digest context simplifying the
handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in
TLS 1.1 and earlier.
Simplify PRF code to also use a single digest and treat EVP_md5_sha1()
as a special case.
Modify algorithm2 field of ciphers to use a single index value for handshake
hash and PRF instead of a bitmap.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Various updates following feedback from the recent commit of the new
GOST2012 code.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Make it clear that this function is ssl specific.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Tidy up the libssl async calls and make sure all IO functions are covered.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
0 is a valid file descriptor so SSL_get_async_wait_fd should instead return
-1 on error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The ASYNC_in_job() function is redundant. The same effect can be achieved by
using ASYNC_get_current_job().
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Initial API implemented for notifying applications that an ASYNC_JOB
has completed. Currently only s_server is using this. The Dummy Async
engine "cheats" in that it notifies that it has completed *before* it
pauses the job. A normal async engine would not do that.
Only the posix version of this has been implemented so far, so it will
probably fail to compile on Windows at the moment.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
