Age | Commit message (Collapse) | Author |
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2774)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2781)
|
|
The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
|
|
Just as we have a table of ssl3_ciphers, add a table of ssl3_scsvs, to contain
SSL_CIPHER objects for these non-valid ciphers. This will allow for unified
handling of such indicators, especially as we are preparing to pass them around
between functions.
Since the 'valid' field is not set for the SCSVs, they should not be used
for anything requiring a cryptographic cipher (as opposed to something
being stuck in a cipher-shaped hole in the TLS wire protocol).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
|
|
Now the certificate and signature algorithm is set in one place we
can use it directly insetad of recalculating it. The old functions
ssl_get_server_send_pkey() and ssl_get_server_cert_index() are no
longer required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2623)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2543)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)
|
|
Otherwise we get a memory leak.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2326)
|
|
The newly added SSL3_CK_CIPHERSUITE_FLAG shouldn't be in a public header
file
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
|
|
The record layer was making decisions that should really be left to the
state machine around unexpected handshake messages that are received after
the initial handshake (i.e. renegotiation related messages). This commit
removes that code from the record layer and updates the state machine
accordingly. This simplifies the state machine and paves the way for
handling other messages post-handshake such as the NewSessionTicket in
TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
|
|
This flag is never set by anything so remove it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2052)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2052)
|
|
This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Done too soon, this is for future OpenSSL 1.2.0
This reverts commit 6c62f9e1639a7d1a879f363a99882920104dfedb.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)
|
|
This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Travis is reporting one file at a time shadowed variable warnings where
"read" has been used. This attempts to go through all of libssl and replace
"read" with "readbytes" to fix all the problems in one go.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Writing still to be done
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Ensure all message types work the same way including CCS so that the state
machine doesn't need to know about special cases. Put all the special logic
into ssl_set_handshake_header() and ssl_close_construct_packet().
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
ssl_set_handshake_header2() was only ever a temporary name while we had
to have ssl_set_handshake_header() for code that hadn't been converted to
WPACKET yet. No code remains that needed that so we can rename it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Remove the old ssl_set_handshake_header() implementations. Later we will
rename ssl_set_handshake_header2() to ssl_set_handshake_header().
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Some functions were being called from both code that used WPACKETs and code
that did not. Now that more code has been converted to use WPACKETs some of
that duplication can be removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
All the other functions that take an argument for the number of bytes
use convenience macros for this purpose. We should do the same with
WPACKET_put_bytes().
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
A few style tweaks here and there. The main change is that curr and
packet_len are now offsets into the buffer to account for the fact that
the pointers can change if the buffer grows. Also dropped support for the
WPACKET_set_packet_len() function. I thought that was going to be needed
but so far it hasn't been. It doesn't really work any more due to the
offsets change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
No need to declare an explicit sub-packet. Just start one.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
To avoid confusion with the read PACKET structure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add CVE to CHANGES
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
* SSL_SESSION_set1_id()
* SSL_SESSION_get0_id_context()
* SSL_CTX_get_tlsext_status_cb()
* SSL_CTX_get_tlsext_status_arg()
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Fix no-ec builds by having separate functions to create keys based on
an existing EVP_PKEY and a curve id.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|