| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15539)
|
|
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes #15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
|
|
Add a pass-through switch case for TLS13_AD_MISSING_EXTENSION in
ssl3_alert_code() and tls1_alert_code(), so that the call to
SSLfatal() in final_psk() will always actually generate an alert,
even for non-TLS1.3 protocol versions.
Fixes #15375
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15412)
|
|
We should no longer be relying on compile time checks in libssl for
the availability of crypto algorithms. The availability of crypto
algorithms should be determined at runtime based on what providers have
been loaded.
Fixes #13616
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13999)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13467)
|
|
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
|
|
If a digest is not available we just get an "internal error" error
message - which isn't very helpful for diagnosing problems. Instead we
explicitly state that we couldn't find a suitable digest.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12733)
|
|
gcc 10 seems to think of assigning to an (unsigned) char
array as a stringop and demands additional space for a
terminating '\0':
In function 'ssl3_generate_key_block',
inlined from 'ssl3_setup_key_block' at ssl/s3_enc.c:304:11:
ssl/s3_enc.c:51:20: error: writing 1 byte into a region of size 0
[-Werror=stringop-overflow=]
51 | buf[j] = c;
| ~~~~~~~^~~
ssl/s3_enc.c: In function 'ssl3_setup_key_block':
ssl/s3_enc.c:23:19: note: at offset 16 to object 'buf' with size 16
declared here
23 | unsigned char buf[16], smd[SHA_DIGEST_LENGTH];
| ^~~
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12632)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12288)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)
|
|
A couple of fetches of the MD5 and SHA1 digests were not using the
libctx in libssl and causing test_ssl_new to fail in travis. This
only occurs on builds with SSLv3 enabled (its disabled by default).
[extended tests]
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11586)
|
|
We modify libssl to use explicitly fetched ciphers, digests and other
algorithms as required based on the configured library context and
property query string for the SSL_CTX that is being used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10854)
|
|
This is a flag that has lost its relevance. The new mechanism to do
the same thing is to fetch the needed digest explicitly with "-fips"
as property query, i.e. we remove any requirement for that property to
be set when fetching, even if the default property query string
requires its presence.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10138)
|
|
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
|
|
Instead of referencing the return size from the OSSL_PARAM structure, make the
size a field within the structure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9135)
|
|
This is still required currently by engines and digestsign/digestverify.
This PR contains merged in code from Richard Levitte's PR #9126.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9103)
|
|
Move digest code into the relevant providers (fips, default, legacy).
The headers are temporarily moved to be internal, and will be moved
into providers after all external references are resolved. The deprecated
digest code can not be removed until EVP_PKEY (signing) is supported by
providers. EVP_MD data can also not yet be cleaned up for the same reasons.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8763)
|
|
With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.
This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7971)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7768)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7085)
|
|
If we sent early_data and then received back an HRR, the enc_write_ctx
was stale resulting in errors if an alert needed to be sent.
Thanks to Quarkslab for reporting this.
In any case it makes little sense to encrypt alerts using the
client_early_traffic_secret, so we add special handling for alerts sent
after early_data. All such alerts are sent in plaintext.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5689)
|
|
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5645)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #4672
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
|
|
This is an initial step towards using SSLfatal() everywhere. Initially in
this commit and in subsequent commits we focus on the state machine code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4778)
|
|
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
|
|
unified them.
- return (0); -> return 0;
- return (1); -> return 1;
- return (-1); -> return -1;
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4500)
|
|
Move the definition of ossl_assert() out of e_os.h which is intended for OS
specific things. Instead it is moved into internal/cryptlib.h.
This also changes the definition to remove the (int) cast.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4073)
|
|
This is done with the kind permission of Nokia.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3722)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3496)
|
|
This trace option does not appear in Configure as a separate option and is
undocumented. It can be switched on using "-DOPENSSL_SSL_TRACE_CRYPTO",
however this does not compile in master or in any 1.1.0 released version.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2898)
|
|
ssl3_change_cipher_state
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2164)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Some misc return value checks
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The ssl3_init_finished_mac() function can fail, in which case we need to
propagate the error up through the stack.
RT#3198
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The ssl3_digest_cached_records() function was failing to handle errors
that might be returned from EVP_DigestSignInit() and
EVP_DigestSignUpdate().
RT#4180
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
