Age | Commit message (Collapse) | Author |
|
Add null check to cmac_size(). This avoids a seg-fault encountered
with cmac when EVP_MAC_CTX_get_mac_size() is called before init.
Extend mac testing in evp_test.c to check that the sizes returned by
EVP_MAC_CTX_get_mac_size() before and after init make sense (this also
ensures that we no longer seg-fault).
Fixes #22842
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22858)
|
|
Signed-off-by: lan1120 <lanming@huawei.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22795)
|
|
Unroll AES-CTR loops to a maximum 12 blocks for ARM Neoverse V1 and
V2, to fully utilize their AES pipeline resources.
Improvement on ARM Neoverse V1.
Package Size(Bytes) 16 32 64 128 256 1024
Improvement(%) 3.93 -0.45 11.30 4.31 12.48 37.66
Package Size(Bytes) 1500 8192 16384 61440 65536
Improvement(%) 37.16 38.90 39.89 40.55 40.41
Change-Id: Ifb8fad9af22476259b9ba75132bc3d8010a7fdbd
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22733)
|
|
ctx->propq that strdup from input parameter propq in sm2sig_newctx,
is not released. It should be released in sm2sig_freectx and copied
to dstctx in sm2sig_dupctx. And dstctx->id and dstctx->propq should
be set NULL to avoid releasing id/propq of srcctx when err occurs.
Signed-off-by: Huiyue Xu <xuhuiyue@huawei.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22796)
|
|
Fixes: commit 6d1e730a1ea2c64bdffa88c6b3bee4c3f5bed602 ("Implement
BLAKE2s with the same macro as BLAKE2b")
Closes: #22708
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22710)
|
|
The upper limit of the output size is the default output size of
the respective algorithm variants.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22659)
|
|
The new EVP_DigestSqueeze() API requires changes to all keccak-based
digest provider implementations. Update the s390x-part of the SHA3
digest provider.
Squeeze for SHA3 is not supported, so add an empty function pointer
(NULL).
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22221)
|
|
The digest life-cycle state diagram has been updated for XOF. Fix the
state handling in s390x_keccac_final() according to the updated state
diagram.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22221)
|
|
The digest life-cycle state diagram has been updated for XOF. Fix the
state handling in s390x_shake_final() according to the updated state
diagram.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22221)
|
|
The digest life-cycle state diagram has been updated for XOF. Fix the
state handling in s390x_sha3_final() according to the updated state
diagram.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22221)
|
|
The digest life-cycle state diagram has been updated for XOF. Fix the
state handling in s390x_sha3_aborb() according to the updated state
diagram.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22221)
|
|
The digest life-cycle diagram specifies state transitions to `updated`
(aka XOF_STATE_ABSORB) only from `initialised` and `updated`. Add this
checking to the generic sha3 absorb implementation.
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22221)
|
|
Fixes #7894
This allows SHAKE to squeeze multiple times with different output sizes.
The existing EVP_DigestFinalXOF() API has been left as a one shot
operation. A similar interface is used by another toolkit.
The low level SHA3_Squeeze() function needed to change slightly so
that it can handle multiple squeezes. This involves changing the
assembler code so that it passes a boolean to indicate whether
the Keccak function should be called on entry.
At the provider level, the squeeze is buffered, so that it only requests
a multiple of the blocksize when SHA3_Squeeze() is called. On the first
call the value is zero, on subsequent calls the value passed is 1.
This PR is derived from the excellent work done by @nmathewson in
https://github.com/openssl/openssl/pull/7921
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21511)
|
|
This avoids code duplication and provides variable-size support
for BLAKE2s like 786b9a8
Test data obtained with libb2 with the following programs:
==> b2.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[16] = {};
blake2s(buf, 0, 0, 16, 0, 0);
write(1, buf, 16);
}
==> b3.c <==
#include <blake2.h>
#include <unistd.h>
int main() {
char buf[10] = {};
blake2s(buf, "\x61", 0, 10, 1, 0);
write(1, buf, 10);
}
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22444)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22444)
|
|
Also make sure the key is not set if the key
length is changed on the context after the key was
set previously.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22590)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22590)
|
|
This patch provides stream and multi-block implementations for
AES-128-ECB, AES-192-ECB, and AES-256-ECB to accelerate AES-ECB.
Also, refactor functions to share the same variable
declaration in aes-riscv64-zvkned.pl.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
To accelerate the performance of the AES-XTS mode, in this patch, we
have the specialized multi-block implementation for AES-128-XTS and
AES-256-XTS.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
The argument `key-length` includes 2 sets of keys.
All declarations should under `PROV_CIPHER_HW_declare_xts()` macro.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
To enhance test coverage for AES-GCM mode, we provided longer additional
testing patterns for AES-GCM testing.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
To accelerate the performance of the AES-GCM mode, in this patch, we
have the specialized multi-block implementations for AES-128-GCM,
AES-192-GCM and AES-256-GCM.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
Unify the return value for `CRYPTO_gcm128_decrypt` as `CRYPTO_gcm128_encrypt`.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
Support zvbb-zvkned based rvv AES-128/192/256-CTR encryption.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
Replace old CBC implementation with optimized AES-128/192/256-CBC in
this patch.
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
https://github.com/riscv/riscv-crypto/blob/c8ddeb7e64a3444dda0438316af1238aeed72041/doc/vector/riscv-crypto-vector-zvkb.adoc
Create `RISCV_HAS_ZVKB()` macro.
Use zvkb for SM4 instead of zvbb.
Use zvkb for ghash instead of zvbb.
We could just use the zvbb's subset `zvkb` for flexibility.
Signed-off-by: Jerry Shih <jerry.shih@sifive.com>
Signed-off-by: Phoebe Chen <phoebe.chen@sifive.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
Even though the RISC-V vector instructions only support AES-128 and
AES-256 for key generation, the round instructions themselves can
easily be used to implement AES-192 too - we just need to fallback to
the generic key generation routines in this case.
Note that the vector instructions use the encryption key schedule (but
in reverse order) so we need to generate the encryption key schedule
even when doing decryption using the vector instructions.
Signed-off-by: Ard Biesheuvel <ardb@google.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
The upcoming RISC-V vector crypto extensions feature
a Zvksed extension, that provides SM4-specific instructions.
This patch provides an implementation that utilizes this
extension if available.
Tested on QEMU and no regressions observed.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
The upcoming RISC-V vector crypto extensions provide
the Zvkned extension, that provides a AES-specific instructions.
This patch provides an implementation that utilizes this
extension if available.
Tested on QEMU and no regressions observed.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21923)
|
|
While RFC 5705 implies that the maximum length of context for
exporters to be 65535 bytes as the length is embedded in uint16, the
current implementation enforces much smaller limit, which is less than
1024 bytes. This removes the restriction by dynamically allocating
memory.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22465)
|
|
BLAKE2 is not really an extensible output function unlike SHAKE
as the digest size must be set during the context initialization.
Thus it makes no sense to use OSSL_DIGEST_PARAM_XOFLEN.
We also need to adjust EVP_DigestFinal_ex() to query the
OSSL_DIGEST_PARAM_SIZE as gettable ctx param for the size.
Fixes #22488
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22491)
|
|
The 'rand_generate' method is not well suited for being used with
weak entropy sources in the 'get_entropy' callback, because the
caller needs to provide a preallocated buffer without knowing
how much bytes are actually needed to collect the required entropy.
Instead we use the 'rand_get_seed' and 'rand_clear_seed' methods
which were exactly designed for this purpose: it's the callee who
allocates and fills the buffer, and finally cleans it up again.
The 'rand_get_seed' and 'rand_clear_seed' methods are currently
optional for a provided random generator. We could fall back to
using 'rand_generate' if those methods are not implemented.
However, imo it would be better to simply make them an officially
documented requirement for seed sources.
Fixes #22332
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22394)
|
|
The `get_user_{entropy,nonce}` callbacks were add recently to the
dispatch table in commit 4cde7585ce8e. Instead of adding corresponding
`cleanup_user_{entropy,nonce}` callbacks, the `cleanup_{entropy,nonce}`
callbacks were reused. This can cause a problem in the case where the
seed source is replaced by a provider: the buffer gets allocated by
the provider but cleared by the core.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22423)
|
|
This copy would need an update on dupctx but
rather than doing it just remove the copy.
This fixes failures of evp_test on Windows with
new CPUs.
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22384)
|
|
The semantics of ossl_ffc_validate_public_key() and
ossl_ffc_validate_public_key_partial() needs to be changed
to not return error on non-fatal problems.
Fixes #22287
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22291)
|
|
This would happen if EVP_MD_get_block_size() returned 0
so we return an error instead.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21698)
|
|
The function `ossl_blake2b_param_init` should initialise only, and not
read the data it is initialising
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22282)
|
|
With pre-3.0 OpenSSL, EVP_PKEY_print_private() calls the EVP_PKEY_ASN1_METHOD
function "priv_print", effectively asking the backend to print whatever it
regards as private key components.
In all backends that were built into libcrypto, this function printed what
was included in the private key structure, which usually includes the
public key components as well.
With OpenSSL 3.0, some of the corresponding key2text encoders got a
slightly different behavior, where the presence of the selector
OSSL_KEYMGMT_SELECT_PRIVATE_KEY without the presence of the selector
OSSL_KEYMGMT_SELECT_PUBLIC_KEY would only get what would intuitively be
regarded as private key components printed. This isn't entirely consistent,
though, as the RSA key2text encoder will still print the public key
components regardless.
To compensate for the changed backend behavior, EVP_PKEY_print_private()
was made to ask the encoder to print the keypair rather than just the
private key, thereby moving the backend semantics to the application API.
Unfortunately, this causes confusion for providers where the key2text
encoder really should print the private key only.
This change restores the built-in 1.1.1 backend behavior in the encoders
that OpenSSL provides, and renders EVP_PKEY_print_private() more true to its
documented behavior, leaving it to the backend to decide what it regards as
"private key components".
Fixes #22233
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22237)
|
|
Remove the call to rand() and replace with an xor-shift RNG.
There are no security implications to worry about here. This RNG is
used during testing only.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/22211)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes
|
|
We were neglecting to register the main thread to receive thread stop
notifications. This is important if the thread that starts the FIPS
provider is not the same one that is used when OPENSSL_cleanup() is
called.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
|
|
Fixes #21909
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
|
|
Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG. This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)
|
|
In the dupctx fixups I missed a pointer that needed to be repointed to
the surrounding structures AES_KEY structure for the sm4/aes/aria
ccm/gcm variants. This caused a colliding use of the key and possible
use after free issues.
Fixes #22076
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22102)
|
|
We had some use of the C11 _Static_assert feature which can cause some
problems on some platforms. Everywhere we were using it, it is not really
required so remove it.
Fixes #22017
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22091)
|
|
Fixes #22089
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22090)
|