Age | Commit message (Collapse) | Author |
|
NIST SP 800-132 [1] section 5.1 says "[t]he length of the
randomly-generated portion of the salt shall be at least
128 bits", which implies that the salt for PBKDF2 must be at least 16
bytes long (see also Appendix A.2.1).
The FIPS 140-3 IG [2] section 10.3.A requires that "the lengths and the
properties of the Password and Salt parameters, as well as the desired
length of the Master Key used in a CAST shall be among those supported
by the module in the approved mode."
As a consequence, the salt length in the self test must be at least 16
bytes long for FIPS 140-3 compliance. Switch the self test to use the
only test vector from RFC 6070 that uses salt that is long enough to
fulfil this requirement. Since RFC 6070 does not provide expected
results for PBKDF2 with HMAC-SHA256, use the output from [3], which was
generated with python cryptography, which was tested against the RFC
6070 vectors with HMAC-SHA1.
[1]: https://doi.org/10.6028/NIST.SP.800-132
[2]: https://csrc.nist.gov/CSRC/media/Projects/cryptographic-module-validation-program/documents/fips%20140-3/FIPS%20140-3%20IG.pdf
[3]: https://github.com/brycx/Test-Vector-Generation/blob/master/PBKDF2/pbkdf2-hmac-sha2-test-vectors.md
Signed-off-by: Clemens Lang <cllang@redhat.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20429)
|
|
Fixes #19989
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20241)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/20386)
|
|
This reverts commit 09627a8ceb69e19d2855b36228f44a3660af177a.
NIST isn't allowing EdDSA at this stage after all, so flag it as not
FIPS approved in the FIPS provider. Guidance for FIPS 140-3 is expected
later this month:
The use of EdDSA still remains non-approved.
Before the FIPS 186-5 and SP 800-186 algorithms / curves can be
used in the approved mode, the CMVP will need to do (at least)
the following:
* Incorporate FIPS 186-5 and SP 800-186 into SP 800-140C/D;
* Update IG 10.3.A to incorporate self-test requirements for the
new algorithms/curves.
* Write a new IG on this transition to clarify the issues raised in
this thread and elsewhere and provide a clear transition schedule.
The CMVP is working on all three of these items and hope to have
drafts public by the end of March.
Since security relevant changes are not permitted for new 140-2
submissions, and under the assumption that this transition away
from FIPS 186-4 algorithms will be 'soft' and not move modules to
the historical list, we do not plan on writing 140-2 guidance for
this transition.
It seems unlikely that all of these requirements will be completed before
we submit.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20343)
|
|
With FIPS 186-5 being published, these can again be validated.
https://csrc.nist.gov/publications/detail/fips/186/5/final
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/20219)
|
|
CMVP's answer when questioned about this being:
X448 and X25519 uses Curve448 and Curve25519, respectfully, within an
ECDH scheme. Therefore, it is possible for a key agreement scheme
that uses Curve448 and Curve25519 to be used in the approved mode
and be viewed as an allowed algorithm if requirements of Scenario
X2 of IG D.8 and IG A.2 are met (or Scenario 3 of D.F and IG C.A for
FIPS 140-3). The use of EdDSA in the approved mode is not permitted
until FIPS 186-5 is published and part of CMVP guidance.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20079)
|
|
Likewise for the related ECX key exchanges.
NIST is mandating this until FIPS 186-5 is finalised.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20020)
|
|
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19777)
|
|
And so clean a few useless includes
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19721)
|
|
This reverts commit fc0bb3411bd0c6ca264f610303933d0bf4f4682c and changes
how 3DES is advertised.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19631)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
|
|
Co-authored-by: Randall Steck <rsteck@thinqsoft.com>
Co-authored-by: Mark J. Minnoch <mark@keypair.us>
Co-authored-by: Steve Weymann <steve@keypair.us>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
|
|
Co-authored-by: Randall Steck <rsteck@thinqsoft.com>
Co-authored-by: Mark J. Minnoch <mark@keypair.us>
Co-authored-by: Steve Weymann <steve@keypair.us>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
|
|
Fixes #19488
Use the correct OSSL_PKEY_PARAM_RSA CRT names fior the self tests.
The invalid names cause CRT parameters to be silently ignored.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19501)
|
|
The fallback DEP works fine there. XLC should be unaffected.
CLA: trivial
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18892)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18368)
|
|
Rather than relying on the locale code working, instead implement these
functions directly.
Fixes #18322
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/18344)
|
|
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
|
|
It also allows for passing -DOPENSSL_NO_LOCALE as a workaround
to ./Configure command.
Fixes #18233
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18282)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Release: yes
|
|
If GNU toolchain is used, use the __attribute__((constructor))
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18147)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18069)
|
|
This refactors OSSL_LIB_CTX to avoid using CRYPTO_EX_DATA. The assorted
objects to be managed by OSSL_LIB_CTX are hardcoded and are initialized
eagerly rather than lazily, which avoids the need for locking on access
in most cases.
Fixes #17116.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17881)
|
|
Including e_os.h with a path from a header file doesn't work well on
certain exotic platform. It simply fails to build.
Since we don't seem to be able to stop ourselves, the better move is
to move e_os.h to an include directory that's part of the inclusion
path given to the compiler.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17641)
|
|
Circumvents a problem with ancient PA-RISC compilers on HP/UX.
Fixes #17477
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17478)
|
|
When calling EVP_PKEY_sign(), the size of the signature buffer must
be passed in *siglen.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16789)
|
|
Fixes #16457
The ECDSA and DSA signature tests use Pairwise tests instead of KATS.
Note there is a seperate type used by the keygen for conditional Pairwise Tests.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16461)
|
|
The power up known answer test for the TLS 1.3 KDF does just the first step
to derive the "client_early_traffic_secret" using the two modes of the KDF.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/16203)
|
|
Ensure we free the OSSL_LIB_CTX on the error path.
Fixes #16163
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16168)
|
|
This is a request from the lab that changes the AES_GCM test back to perform both a encrypt and
decrypt. (This makes no logical sense since this is not an inverse cipher).
I have left the AES_ECB decrypt test in (although it may not be needed)
since it is actually testing the inverse cipher case.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15844)
|
|
Fixes #15804
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15807)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15794)
|
|
The entry point needs the option 'binitfini', but it was not being
added since the perl code to detect the match did not work.
The entry point for AIX is no longer static - so a wrapper has been
added to call the static version.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15636)
|
|
For functions that exist in 1.1.1 provide a simple aliases via #define.
Fixes #15236
Functions with OSSL_DECODER_, OSSL_ENCODER_, OSSL_STORE_LOADER_,
EVP_KEYEXCH_, EVP_KEM_, EVP_ASYM_CIPHER_, EVP_SIGNATURE_,
EVP_KEYMGMT_, EVP_RAND_, EVP_MAC_, EVP_KDF_, EVP_PKEY_,
EVP_MD_, and EVP_CIPHER_ prefixes are renamed.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15405)
|
|
They need to be set once the provider will definitely be loading. If they
are set earlier, a double free results on a failure.
Fixes #15452
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15492)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15468)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15149)
|
|
Also add a C++ constructor as per note 7 of IG 9.10 if no DEP is available and
C++ is being used.
Fixes #15322
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15324)
|
|
provider/fips/fipsprov.c contains a number of symbols that get used by
anything that's included in libfips.a, at least on Unix.
Unfortunately, there are platforms that do not support resolving
symbols to things that are already included in the end product (module
in this case) being built; they only support resolving symbols with
what comes next in the linking process.
The offending symbols in this case are FIPS_security_check_enabled,
c_thread_start and ossl_fips_intern_provider_init.
We resolve this by placing provider/fips/fipsprov.c in libfips.a along
with everything else there. That takes care of the offending symbols.
What remains is to ensure that there is an entry point in an object
file used directly when linking the module, providers/fips/fips_entry.c
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15370)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15229)
|
|
Where an object has multiple ex_data associated with it, then we free that
ex_data in order of priority (high priority first).
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14991)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15150)
|
|
The OIDs were extracted with the help of libcrypto's ASN1 OID database.
While doing this, we move all the names strings to macro definitions,
to avoid duplication and conflicting names declarations. Those macros
are all in providers/implementations/include/prov/names.h
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14498)
|
|
Change:
EVP_RAND_gettable_ctx_params -> EVP_RAND_CTX_gettable_params
EVP_RAND_settable_ctx_params -> EVP_RAND_CTX_settable_params
Which brings them in line with the other similar functions for other algorithm
types.
Fixes #14880
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14893)
|
|
When we store references to up-calls for future reference we run a sanity
check to make sure we either previously haven't set these values or they
are the same as last time. We don't support the scenario where an
application is linked against multiple versions of libcrypto but using a
shared fips.so file. This would result in different up-calls for different
calls to OSSL_provider_init(), which we currently can't handle.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14814)
|
|
We had some FIPS global variables that were based on values from the
config file. In theory if two instances of the fips module are loaded
they could be based on different config files which would cause this to
fail. Instead we store them in the FIPS_GLOBAL structure.
Fixes #14364
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14814)
|
|
Fixes #14807
Compliance with IG 9.4 requires that an inverse cipher function be
tested if one is implemented. Just running AES_GCM encrypt/decrypt does not meet this
requirement (Since only ECB, CBC, XTS, KW, KWP support the inverse
function during decryption mode).
Added a mode to the cipher test so that the AES_GCM only does an encrypt
and AES_ECB only does a decrypt. TDES still does both.
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14825)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14785)
|
|
With new provided algorithms added, we'd rather rely on the names and
descriptions that we get from the providers.
Specifically with the 'openssl list' command, we now display the
description of all algorithms. For '-public-key-algorithms', we
additionally print key type information a bit more like we do for
legacy methods.
We also add descriptions to all our keymgmt functions, because the
built in EVP_PKEY_ASN1_METHODs had them.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14656)
|