Age | Commit message (Collapse) | Author |
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13320)
|
|
POD commands must always be surrounded by blank lines
POD transformers read everything in paragraph mode. The following
lines become *one* command, where the second line becomes part of the
text of the first, including the command itself. In other words,
this:
=item something
=item something else
Translates to this in a man-page:
something =item something else
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13412)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13388)
|
|
Fixes #13232
Added example that shows setup of XOF.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13385)
|
|
Fixes #11351
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13376)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13384)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13384)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13313)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13306)
|
|
Refactor them into inline ossl_ends_with_dirsep function in
internal/cryptlib.h.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13306)
|
|
OSSL_ENCODER_CTX_new_by_EVP_PKEY() takes one more argument to express
the desired outermost structure for the output.
This also adds OSSL_ENCODER_CTX_prune_encoders(), which is used to
reduce the stack of encoders found according to criteria formed from
the combination of desired selection, output type and output
structure.
squash! ENCODER: Add output structure support for EVP_PKEY encoding
Replace the paragraph talking about OSSL_ENCODER_CTX_prune_encoders() with:
The encoding processor encoder_process() is enhanced with better
analysis of the stack of encoder implementations. To avoid having to
keep an on the side array of information, it uses recursion.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
|
|
OSSL_FUNC_encoder_does_selection() is a dispatchable encoder implementation
function that should return 1 if the given |selection| is supported by an
encoder implementation and 0 if not. This can be used by libcrypto
functionality to figure out if an encoder implementation should be
considered or not.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13167)
|
|
OSSL_DECODER_CTX_new_by_EVP_PKEY() takes one more argument to express
the desired outermost structure for the input.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13248)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13357)
|
|
Added settable integer parameters OSSL_KDF_PARAM_KBKDF_USE_L, OSSL_KDF_PARAM_KBKDF_USE_SEPARATOR.
This is required for CAVS tests that only use a combined blob of
inputdata. A test showing this use case has been added.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13258)
|
|
To generate unencrypted PKCS#12 file it is needed to use options: -keypbe NONE -certpbe NONE
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12426)
|
|
-verify_ip
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12932)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12932)
|
|
errors
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12932)
|
|
structuring of SYNOPSIS
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12932)
|
|
in particular regarding the checks due to X509_V_FLAG_X509_STRICT/-x509_strict
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13312)
|
|
These methods should ultimately be deprecated. The move is to insulate
non-UNIX platforms from these undefined symbols.
CLA: Permission is granted by the author to the OpenSSL team to use
these modifications.
Fixes #13273
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13276)
|
|
doc/internal/man7/deprecation.pod was unclear in some areas, and
included general documentation that has no place there.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13240)
|
|
These are meant to be used with functions like
OSSL_ENCODER_CTX_new_by_EVP_PKEY()
The OSSL_ENCODER_CTX_new_by_EVP_PKEY() manual is also expanded on the
topics of output types and selections.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13189)
|
|
There is no option to output DH params in DER form. -outform doesn't
apply to -genparam with 'openssl genpkey', and it shouldn't.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13266)
|
|
The keydata argument of OSSL_FUNC_keymgmt_validate() should be read-only.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13201)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13204)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13116)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13116)
|
|
Fixes #11320
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13116)
|
|
This removes a TODO.
This function is not needed since any place that needs to do the
conversion normally has a special case name2nid table.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13202)
|
|
The keydata argument of OSSL_FUNC_keymgmt_has() should be read-only.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13200)
|
|
'openssl dsaparam' is affected as an obvious usage example.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13191)
|
|
Also deprecate EVP_PKEY_get1_tls_encodedpoint().
The preferred alternative is EVP_PKEY_set1_encoded_public_key() and
EVP_PKEY_get1_encoded_public_key().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
|
|
Also documented EVP_PKEY_get1_encoded_public_key
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
|
|
We do the same thing for the "get1" version. In reality this has broader
use than just TLS (it can also be used in CMS), and "encodedpoint" only
makes sense when you are talking about EC based algorithms.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13105)
|
|
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13084)
|
|
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13144)
|
|
This change makes the naming more consistent, because three different terms
were used for the same thing. (The term libctx was used by far most often.)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
|
|
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
|
|
These were previously added as an internal API. But since the CMS code
needs them, other code might do too.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13088)
|
|
Note that with this commit the optional parameter is introduced, but
libssl still ignores it.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13018)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13074)
|
|
This adds OSSL_ENCODER_to_data() and OSSL_DECODER_from_data(). These
functions allow fairly simple rewrites of type-specific i2d and d2i
calls.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13094)
|
|
Add PKCS7_get_octet_string() and PKCS7_type_is_other() to the public interface.
Fixes #11139
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13059)
|
|
The functions being:
rsa_check_crt_components, rsa_check_key, rsa_check_pminusq_diff,
rsa_check_prime_factor, rsa_check_prime_factor_range,
rsa_check_private_exponent, rsa_check_public_exponent,
rsa_digestinfo_encoding, rsa_fips186_4_gen_prob_primes, rsa_fromdata,
rsa_get0_all_params, rsa_get0_libctx, rsa_get0_pss_params_30,
rsa_get_lcm, rsa_mgf_nid2name, rsa_mp_coeff_names, rsa_mp_exp_names,
rsa_mp_factor_names, rsa_new_with_ctx, rsa_oaeppss_md2nid,
rsa_oaeppss_nid2name, rsa_padding_add_PKCS1_OAEP_mgf1_with_libctx,
rsa_padding_add_PKCS1_type_2_with_libctx,
rsa_padding_add_SSLv23_with_libctx, rsa_padding_check_PKCS1_type_2_TLS,
rsa_pkey_method, rsa_pss_params_30_copy, rsa_pss_params_30_fromdata,
rsa_pss_params_30_hashalg, rsa_pss_params_30_is_unrestricted,
rsa_pss_params_30_maskgenalg, rsa_pss_params_30_maskgenhashalg,
rsa_pss_params_30_saltlen, rsa_pss_params_30_set_defaults,
rsa_pss_params_30_set_hashalg, rsa_pss_params_30_set_maskgenalg,
rsa_pss_params_30_set_maskgenhashalg, rsa_pss_params_30_set_saltlen,
rsa_pss_params_30_set_trailerfield, rsa_pss_params_30_todata,
rsa_pss_params_30_trailerfield, rsa_pss_pkey_method, rsa_set0_all_params,
rsa_sp800_56b_check_keypair, rsa_sp800_56b_check_private,
rsa_sp800_56b_check_public, rsa_sp800_56b_derive_params_from_pq,
rsa_sp800_56b_generate_key, rsa_sp800_56b_pairwise_test,
rsa_sp800_56b_validate_strength, rsa_todata, rsa_validate_pairwise,
rsa_validate_private and rsa_validate_public.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13040)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13048)
|
|
There is some data that is very difficult to guess. For example, DSA
parameters and X9.42 DH parameters look exactly the same, a SEQUENCE
of 3 INTEGER. Therefore, callers may need the possibility to select
the exact keytype that they expect to get.
This will also allow use to translate d2i_TYPEPrivateKey(),
d2i_TYPEPublicKey() and d2i_TYPEParams() into OSSL_DECODER terms much
more smoothly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13061)
|