| Age | Commit message (Collapse) | Author |
|---|
|
Always refer to openssl.pod instead of repeating the same description
everywhere.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10126)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10121)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10101)
|
|
Normalise on L<openssl-cmd(1)> over L<cmd(1)>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Make replacables italic, change '-rand' to '-r', fix links.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Better synopsis for 'openssl dgst' and 'openssl enc', correct names
for 'openssl rehash' ('c_rehash' is mentioned there too), correct
option end marker for 'openssl verify', and finally, refer to
sub-commands as sub-commands.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
"gost" was called "ccgost".
"rsax" was treated like literal input rather than an engine name.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Almost all OpenSSL commands are in reality 'openssl cmd', so make sure
they are refered to like that and not just as the sub-command.
Self-references are avoided as much as is possible, and replaced with
"this command". In some cases, we even avoid that with a slight
rewrite of the sentence or paragrah they were in. However, in the few
cases where a self-reference is still admissible, they are done in
bold, i.e. openssl-speed.pod references itself like this:
B<openssl speed>
References to other commands are done as manual links, i.e. CA.pl.pod
references 'openssl req' like this: L<openssl-req(1)>
Some commands are examples rather than references; we enclose those in
C<>.
While we are it, we abolish "utility", replacing it with "command", or
remove it entirely in some cases.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Quite a lot of replacables were still bold, and some options were
mentioned without a beginning dash.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Ellipses were used to express that the '-rand' value can specify
multiple files, like this:
B<-rand> I<file...>
Because there are conventions around ellipses, this becomes confusing,
because '-rand file...' is normally intepreted to mean that
'-rand file1 file2 file3' would be processed as three randomness
files, which makes no sense.
Rather than making things complicated with more elaborate syntax, we
change it to:
B<-rand> I<files>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10065)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9991)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10113)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10110)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10053)
|
|
Extensive documentation added in HISTORY section in doc/man5/config.pod
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9578)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10096)
|
|
This modifies the treatment of algorithm name strings to allow
multiple names separated with colons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8985)
|
|
Add documentation for EVP_DigestSignInit_ex() and
EVP_DigestVerifyInit_ex(), and add an appropriate CHANGES entry.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10013)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10006)
|
|
Mention that EVP_DigestInit() also clears all flags.
Fixes: 10031
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10032)
|
|
Also patch find-doc-nits to ignore a Microsoft trademark and not
flag it as a spelling error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10023)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10073)
|
|
Make find-doc-nits understand that
=for comment ifdef ssl3 ...
in a POD page means that the "-ssl3" flag might be ifdef'd out in the
local environment, and not to complain about it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9974)
|
|
So far, these two funtions have depended on legacy EVP_CIPHER
implementations to be able to do their work. This change adapts them
to work with provided implementations as well, in one of two possible
ways:
1. If the implementation's set_asn1_parameters or get_asn1_parameters
function pointers are non-NULL, this is a legacy implementation,
and that function is called.
2. Otherwise, if the cipher doesn't have EVP_CIPH_FLAG_CUSTOM_ASN1
set, the default AlgorithmIdentifier parameter code in libcrypto
is executed.
3. Otherwise, if the cipher is a provided implementation, the ASN1
type structure is converted to a DER blob which is then passed to
the implementation as a parameter (param_to_asn1) or the DER blob
is retrieved from the implementation as a parameter and converted
locally to a ASN1_TYPE (asn1_to_param).
With this, the old flag EVP_CIPH_FLAG_DEFAULT_ASN1 has become
irrelevant and is simply ignored.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10008)
|
|
Details from man-pages(7) that are used:
Formatting conventions for manual pages describing functions
...
Variable names should, like argument names, be specified in italics.
...
Formatting conventions (general)
...
Special macros, which are usually in uppercase, are in bold.
Exception: don't boldface NULL.
...
Furthermore, for TYPE used as a placeholder for types and correponding
part of function names, we extrapolate that it's both a type and a
variable, and should therefore be bold (typical for types and function
names) and italic (typical for variables). POD processors don'e know
this, so we have to help them along. Therefore:
SPARSE_ARRAY_OF(TYPE) => B<SPARSE_ARRAY_OF>(B<I<TYPE>>)
ossl_sa_TYPE_num() => B<ossl_sa_I<TYPE>_num>()
TYPE => B<I<TYPE>>
There are some other less typical uses where one simply has to give
formatting some extra though.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10041)
|
|
Details from man-pages(7) that are used:
Formatting conventions for manual pages describing functions
...
Variable names should, like argument names, be specified in italics.
...
Formatting conventions (general)
...
Special macros, which are usually in uppercase, are in bold.
Exception: don't boldface NULL.
...
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10042)
|
|
For documentation of all commands with "-flag arg" format them
consistently: "B<-flag> I<arg>", except when arg is literal
(for example "B<-inform> B<PEM>|B<DER>")
Update find-doc-nits to complain if badly formatted strings are found.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10022)
|
|
Details from man-pages(7) that are used:
Formatting conventions for manual pages describing functions
...
Variable names should, like argument names, be specified in italics.
...
Formatting conventions (general)
...
Special macros, which are usually in uppercase, are in bold.
Exception: don't boldface NULL.
...
Additionally, expanded some lists to make better use of POD formatting.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10043)
|
|
Although the synopsis used the correct function names, the description did
not. Also the description of the equivalent DTLSv1_listen() callbacks was
missing, so these have been added.
Fixes #10030
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10033)
|
|
Unset data defaults to the empty string ("") or 0.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9948)
|
|
All instances of EVP_*_CTX_gettable_params functions have been renamed
to EVP_*_gettable_ctx_params. Except for the EVP_MD ones which were changed
already.
These functions do not take EVP_*_CTX arguments so their prior naming was
misleading.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10052)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9958)
|
|
If the SM2 ID value has not been passed correctly when signing an SM2
certificate/certificate request, a double free occurs. For instance:
openssl req -x509 ... -sm2-id 1234567812345678
The '-sm2-id' should not be used in this scenario, while the '-sigopt' is
the correct one to use. Documentation has also been updated to make the
options more clear.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9958)
|
|
Rename <openssl/ossl_typ.h> to <openssl/types.h>.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
|
|
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
|
|
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
|
|
We have a few pages where part of function names can be considered
variable. There are no normative guidelines for such a case, but if
we draw from the formatting convention of variable and argument names,
we can draw the conclusion that this variable part should be italized,
within already given conventions. In other words, we need to help the
POD processor along in cases like these:
SPARSE_ARRAY_OF(TYPE)
ossl_sa_TYPE_num()
These need explicit formatting:
B<SPARSE_ARRAY_OF>(I<TYPE>)
B<ossl_sa_I<TYPE>_num>()
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10034)
|
|
It's all in the details, from man-pages(7):
Formatting conventions for manual pages describing functions
...
Variable names should, like argument names, be specified in italics.
...
Formatting conventions (general)
...
Special macros, which are usually in uppercase, are in bold.
Exception: don't boldface NULL.
...
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10034)
|
|
Implement SP800-108 section 5.1 with HMAC intended for use in Kerberos.
Add test vectors from RFC 8009.
Adds error codes PROV_R_INVALID_MAC and PROV_R_MISSING_MAC.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9924)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10025)
|
|
When requesting parameters, it's acceptable to make a first pass with
the |data| field of some parameters being NULL. That can be used to
help the requestor to figure out dynamically what buffer size is
needed. For variable size parameters, there's no other way to find
out.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10025)
|
|
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712)
CMP and CRMF API is added to libcrypto, and the "cmp" app to the openssl CLI.
Adds extensive man pages and tests. Integration into build scripts.
Incremental pull request based on OpenSSL commit 8869ad4a39f of 2019-04-02
4th chunk: CMP context/parameters and utilities
in crypto/cmp/cmp_ctx.c, crypto/cmp/cmp_util.c, and related files
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9107)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10024)
|
|
=item B<MACRO> ("name") <type>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10024)
|
|
Commit b6b66573 (PR #9679) renamed most POD files. This change causes
find-doc-nits to flag misnamed files.
Also fix the two misnamed files that it found.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10000)
|
|
appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10011)
|
