Age | Commit message (Collapse) | Author |
|
This is the EVP operation that corresponds to creating direct RSA, DH
and DSA keys and set their numbers, to then assign them to an EVP_PKEY,
but done entirely using an algorithm agnostic EVP interface.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10187)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)
|
|
Previous macros suggested that from 3.0, we're only allowed to
deprecate things at a major version. However, there's no policy
stating this, but there is for removal, saying that to remove
something, it must have been deprecated for 5 years, and that removal
can only happen at a major version.
Meanwhile, the semantic versioning rule is that deprecation should
trigger a MINOR version update, which is reflected in the macro names
as of this change.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)
|
|
Now that we have an EVP namemap containing all aliases that providers
know about for any given algorithm, it is possible that an application
attempts to look up a digest or a cipher via EVP_get_digestbyname() or
EVP_get_cipherbyname() with an algorithm name that is unknown to the
legacy method database. Therefore we extend those functions to
additionally check the aliases in the namemap when searching for a
method in the event that our initial lookup attempt fails.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10324)
|
|
Because the algorithm to use is decided already when creating an
EVP_PKEY_CTX regardless of how it was created, it turns out that it's
unnecessary to provide the SIGNATURE method explicitly, and rather
always have it be fetched implicitly.
This means fewer changes for applications that want to use new
signature algorithms / implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10303)
|
|
Because the algorithm to use is decided already when creating an
EVP_PKEY_CTX regardless of how it was created, it turns out that it's
unnecessary to provide the KEYEXCH method explicitly, and rather
always have it be fetched implicitly.
This means fewer changes for applications that want to use new key
exchange algorithms / implementations.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10305)
|
|
...in constant time.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10339)
|
|
The s390x x448 implementation does not correctly reduce non-canonical
values i.e., u-coordinates >= p = 2^448 - 2^224 - 1.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10339)
|
|
- add instructions: clfi, stck, stckf, kdsa
- clfi and clgfi belong to extended-immediate (not long-displacement)
- some cleanup
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10346)
|
|
i2v_GENERAL_NAME and GENERAL_NAME_print were assuming that the type of
of a GENERAL_NAME (OTHERNAME) that we read in was the type we expected
it to be. If its something else then this can cause unexpected
behaviour. In the added fuzz test case an OOB read was occurring.
This issue was recently added by commit 4baee2d.
Credit to OSSFuzz for finding this issue.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10300)
|
|
i2v_GENERAL_NAMES call i2v_GENERAL_NAME repeatedly as required. Each
time i2v_GENERAL_NAME gets called it allocates adds data to the passed in
stack and then returns a pointer to the stack, or NULL on failure. If
the passed in stack is itself NULL then it allocates one.
i2v_GENERAL_NAMES was not correctly handling the case where a NULL gets
returned from i2v_GENERAL_NAME. If a stack had already been allocated then
it just leaked it.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10300)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
|
|
This is a wrapper around OSSL_STORE.
This also adds necessary support functions:
- X509_STORE_load_file
- X509_STORE_load_path
- X509_STORE_load_store
- SSL_add_store_cert_subjects_to_stack
- SSL_CTX_set_default_verify_store
- SSL_CTX_load_verify_file
- SSL_CTX_load_verify_dir
- SSL_CTX_load_verify_store
and deprecates X509_STORE_load_locations and SSL_CTX_load_verify_locations,
as they aren't extensible.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
|
|
For some reason, OSSL_STORE_SEARCH_get0_name() and OSSL_STORE_find()
accepted a non-const OSSL_STORE_SEARCH criterion, which isn't at all
necessary.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
|
|
With provided algorithms, the library context is ever present, so of
course it should be specified alongside the algorithm name and
property query string.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10308)
|
|
There is a vagueness around how the provider data (algorithm name and
property query string) is initialized in the presence of an engine.
This change modifies this slightly so that the algorithm name for use
with providers is never set if the initilization was given an engine.
This makes it easier for other functions to simply check ctx->algorithm
to see if the context is meant to be used for strictly legacy stuff or
not.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10308)
|
|
The %zd format corresponds to ssize_t which is used for
function to either return a valid size or a negative value
to indicate an error. Since size_t is in [-1,SSIZE_MAX] it
is not a portable way to represent a pointer diff. For
the %td format which corresponds to ptrdiff_t is C11,
we chose to cast to long instead as it is already done
in other places.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10335)
|
|
clang imposes some restrictions on the assembler code that
gcc does not.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10330)
|
|
OSSL_PARAM_set_BN() filled the buffer from the left with as many bytes
as that the BIGNUM takes, regardless of buffer size or native
endianness. This was due to BN_bn2nativepad() being given the size of
the BIGNUM rather than the size of the buffer (which meant it never
had to pad anything).
The fix is to given BN_bn2nativepad() the size of the buffer instead.
This aligns well with the corresponding _set_ functions for native
integer types work.
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/10326)
|
|
This system services is based on FreeBSD 12's getentropy(), and is
therefore treated the same way as getentropy() with regards to amount
of entropy bits per data bit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8926)
|
|
If no connection could be made, addr_iter will eventually end up being
NULL, and if the user didn't check the returned error value, the
BIO_CONN_S_CONNECT code will be performed again and will crash.
So instead, we add a state BIO_CONN_S_CONNECT_ERROR that we enter into
when we run out of addresses to try. That state will just simply say
"error" back, until the user does something better with the BIO, such
as free it or reset it.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7630)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10321)
|
|
The artificial restriction of digests for the HMAC and HASH DRBGs is lifted.
Any fetchable digest is acceptable except XOF ones (such as SHAKE).
In FIPS mode, the fetch remains internal to the provider so only a FIPS
validated digest will be located.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10321)
|
|
ecp_s390x_nistp.c and ecx_meth.c need to include s390x_arch.h.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10317)
|
|
Fixes #10283
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/10296)
|
|
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10311)
|
|
Free dukm in error handling of dh_cms_encrypt()
Fixes #10294
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/10310)
|
|
Otherwise, should this function be called more than once on the same
EVP_PKEY_CTX, we get double free issues.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10292)
|
|
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10209)
|
|
- Check for the <sys/ktls.h> header to determine if KTLS support
is available.
- Populate a tls_enable structure with session key material for
supported algorithms. At present, AES-GCM128/256 and AES-CBC128/256
with SHA1 and SHA2-256 HMACs are supported. For AES-CBC, only MtE
is supported.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10045)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10257)
|
|
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/10274)
|
|
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10036)
|
|
RSA-PSS keys use the same internal structure as RSA keys but do not
allow accessing it through EVP_PKEY_get0_RSA. This commit changes that
behavior.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10217)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <openssl-users@dukhovni.org>
|
|
Documenting the macros removes 14 undocumented items.
Merged three separate manpages into one.
Rename the DRBG CRYPTO_EX define into RAND_DRBG, but keep the old one
for API compatibility.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10216)
|
|
PR https://github.com/openssl/openssl/pull/10122 introduced changes to
the BN_gcd function and the control logic inside it accessed `g->d[0]`
irrespective of `g->top`.
When BN_add is called, in case the result is zero, `BN_zero` is called.
The latter behaves differently depending on the API compatibility level
flag: normally `g->d[0]` is cleared but in `no-deprecated` builds only
`g->top` is set to zero.
This commit uses bitwise logic to ensure that `g` is treated as zero if
`g->top` is zero, irrespective of `g->d[0]`.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10232)
|
|
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9949)
|
|
There is nothing confidential in `EC_GROUP` so really having a
`EC_GROUP_clear_free` function at all does not make much sense anymore.
See https://github.com/openssl/openssl/issues/9822
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9874)
|
|
There is nothing confidential in `EC_GROUP` so really having a
`EC_GROUP_clear_free` function at all does not make much sense anymore.
See https://github.com/openssl/openssl/issues/9822
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9874)
|
|
HWCAP_S390_VX is missing on SUSE Linux Enterprise Server 12 SP1, so we
add a guard that checks the present of that macro. While we're at it,
we do the same with HWCAP_S390_STFLE, for consistency.
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/9892)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10227)
|
|
Fixes #10049
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10050)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10050)
|
|
Deprecate the BUF_ string macros
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10207)
|
|
This leaves minimal implementations of EVP_blake2b512 and EVP_blake2s256,
that are now only there to provide a name for implicit fetches.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9075)
|
|
It may be that the OSSL_PARAM array we used for getting parameter
values for a key had a few too many entries. These are detected by
their return_size == 0. Before making second export call, we prune
away these items so we only ask for parameters that exist.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10190)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10190)
|
|
rsa_set0_all_params() is used to set all the primes, exponents and
coefficients. rsa_get0_all_params() is used to get all the primes,
exponents and coefficients.
"All" includes p, q, dP, dQ and qInv without making them separate.
All arrays of numbers are implemented as stacks to make dynamic use
easier.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10190)
|
|
This commit replaces the current `BN_gcd` function with a constant-time
GCD implementation.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10122)
|