Age | Commit message (Collapse) | Author |
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12949)
|
|
The check is applied only with X509_V_FLAG_X509_STRICT.
Fixes #12139
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12909)
|
|
Since return is inconsistent, I removed unnecessary parentheses and
unified them.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4541)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4431)
|
|
RT3877: Add X509 OCSP error codes and messages
Add additional OCSP error codes for X509 verify usage
RT3867: Support Multiple CA certs in ocsp app
Add the ability to read multiple CA certs from a single file in the
ocsp app.
Update some missing X509 errors in documentation.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/941)
|
|
The subject name MUST be the same as the issuer name, with a single CN
entry added.
RT#1852
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Since with SSL_VERIFY_NONE, the connection may continue and the
session may even be cached, we should save some evidence that the
chain was not sufficiently verified and would have been rejected
with SSL_VERIFY_PEER. To that end when a CT callback returs failure
we set the verify result to X509_V_ERR_NO_VALID_SCTS.
Note: We only run the CT callback in the first place if the verify
result is still X509_V_OK prior to start of the callback.
RT #4502
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Set ctx->error = X509_V_ERR_OUT_OF_MEM when verificaiton cannot
continue due to malloc failure. Also, when X509_verify_cert()
returns <= 0 make sure that the verification status does not remain
X509_V_OK, as a last resort set it it to X509_V_ERR_UNSPECIFIED,
just in case some code path returns an error without setting an
appropriate value of ctx->error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
This was a developer debugging feature and was never a useful public
interface.
Added all missing X509 error codes to the verify(1) manpage, but
many still need a description beyond the associated text string.
Sorted the errors in x509_txt.c by error number.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
There are header files in crypto/ that are used by a number of crypto/
submodules. Move those to crypto/include/internal and adapt the
affected source code and Makefiles.
The header files that got moved are:
crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Add new verify options to set checks.
Remove previous -check* commands from s_client and s_server.
|
|
|
|
|
|
Tidy CRL scoring system.
Add new CRL path validation error.
|
|
TODO: robustness checking on name forms.
|
|
Submitted by: Martin.Kraemer@Fujitsu-Siemens.com
|
|
|
|
handling to support this.
|
|
a security threat on unexpecting applications. Document and test.
|
|
|
|
CA setting in each certificate on the chain is correct. As a side-
effect always do the following basic checks on extensions, not just
when there's an associated purpose to the check:
- if there is an unhandled critical extension (unless the user has
chosen to ignore this fault)
- if the path length has been exceeded (if one is set at all)
- that certain extensions fit the associated purpose (if one has been
given)
|
|
This tidies up verify parameters and adds support for integrated policy
checking.
Add support for policy related command line options. Currently only in smime
application.
WARNING: experimental code subject to change.
|
|
when X509_V_FLAG_X509_STRICT is set. Check for CRLSign in
CRL issuer certificates. Reject CRLs with unhandled (any)
critical extensions.
|
|
Use BUF_strlcat() instead of strcat().
Use BIO_snprintf() instead of sprintf().
In some cases, keep better track of buffer lengths.
This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
|
|
|
|
|
|
|
|
The old code was painfully primitive and couldn't handle
distinct certificates using the same subject name.
The new code performs several tests on a candidate issuer
certificate based on certificate extensions.
It also adds several callbacks to X509_VERIFY_CTX so its
behaviour can be customised.
Unfortunately some hackery was needed to persuade X509_STORE
to tolerate this. This should go away when X509_STORE is
replaced, sometime...
This must have broken something though :-(
|
|
trust settings of the root CA.
After a few fixes it seems to work OK.
Still need to add support to SSL and S/MIME code though.
|
|
at present. However nothing enables it yet so this doesn't
matter :-)
|
|
This will soon be complemented with MacOS specific source code files and
INSTALL.MacOS.
I (Andy) have decided to get rid of a number of #include <sys/types.h>.
I've verified it's ok (both by examining /usr/include/*.h and compiling)
on a number of Unix platforms. Unfortunately I don't have Windows box
to verify this on. I really appreciate if somebody could try to compile
it and contact me a.s.a.p. in case a problem occurs.
Submitted by: Roy Wood <roy@centricsystems.ca>
Reviewed by: Andy Polyakov <appro@fy.chalmers.se>
|
|
Submitted by:
Reviewed by:
PR:
|
|
|
|
|
|
X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
verify callback function determined that a certificate was revoked.
|
|
|
|
|
|
|