Age | Commit message (Collapse) | Author |
|
failure
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22459)
|
|
The new names are ossl_err_load_xxx_strings.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15446)
|
|
Removed error codes, and the mention of the functions.
This removal is already documented in the CHANGES doc.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15140)
|
|
Fixes #14140
Fixes #13232
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15061)
|
|
CLA: trivial
Signed-off-by: MichaM <contact-micha+github@posteo.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14879)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14429)
|
|
CVE-2021-23840
Reviewed-by: Paul Dale <pauli@openssl.org>
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13999)
|
|
The primary DRBG may be shared across multiple threads and therefore
we must use locking to access it. Previously we were enabling that locking
lazily when we attempted to obtain one of the child DRBGs. Part of the
process of enabling the lock, is to create the lock. But if we create the
lock lazily then it is too late - we may race with other threads where each
thread is independently attempting to enable the locking. This results
in multiple locks being created - only one of which "sticks" and the rest
are leaked.
Instead we enable locking on the primary when we first create it. This is
already locked and therefore we cannot race.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13660)
|
|
We've spread around FETCH_FAILED errors in quite a few places, and
that gives somewhat crude error records, as there's no way to tell if
the error was unavailable algorithms or some other error at such high
levels.
As an alternative, we take recording of these kinds of errors down to
the fetching functions, which are in a much better place to tell what
kind of error it was, thereby relieving the higher level calls from
having to guess.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13467)
|
|
Previously we cached the cipher constants in EVP_CIPHER_fetch(). However,
this means we do the caching every time we call that function, even if
the core has previusly fetched the cipher and cached it already. This
means we can end up re-caching the constants even though they are already
present. This also means we could be updating these constants from
multiple threads at the same time.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13730)
|
|
This replaces the internal evp_pkey_get_EC_KEY_curve_nid()
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13436)
|
|
This is the result of 'make errors ERROR_REBUILD=-rebuild'
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13390)
|
|
Fixes #12840
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12893)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12573)
|
|
Some KDF implementations were available before the current EVP_KDF API.
They were used via EVP_PKEY_derive. There exists a bridge between the old
API and the EVP_KDF API however this bridge itself uses a legacy
EVP_PKEY_METHOD. This commit implements a provider side bridge without
having to use any legacy code.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12573)
|
|
To be able to implement this, there was a need for the standard
EVP_PKEY_set1_, EVP_PKEY_get0_ and EVP_PKEY_get1_ functions for
ED25519, ED448, X25519 and X448, as well as the corresponding
EVP_PKEY_assign_ macros. There was also a need to extend the list of
hard coded names that EVP_PKEY_is_a() recognise.
Along with this, OSSL_FUNC_keymgmt_load() are implemented for all
those key types.
The deserializers for these key types are all implemented generically,
in providers/implementations/serializers/deserializer_der2key.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12544)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11682)
|
|
Fixes a problem where global properties don't work with a NULL query.
Specifying an algorithm with a NULL query ignores the default properties.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12123)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11239)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11651)
|
|
Upgrading EVP_PKEYs from containing legacy keys to containing provider
side keys proved to be risky, with a number of unpleasant corner
cases, and with functions like EVP_PKEY_get0_DSA() failing
unexpectedly.
We therefore change course, and instead of upgrading legacy internal
keys to provider side internal keys, we downgrade provider side
internal keys to legacy ones. To be able to do this, we add
|import_from| and make it a callback function designed for
evp_keymgmt_export().
This means that evp_pkey_upgrade_to_provider() is replaced with
evp_pkey_downgrade().
EVP_PKEY_copy_parameters() is the most deeply affected function of
this change.
Fixes #11366
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
|
|
We were doing an EVP_MAC_fetch without using the correct libctx.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11354)
|
|
This modifies the treatment of algorithm name strings to allow
multiple names separated with colons.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8985)
|
|
The output C code was made to use ERR_func_error_string() to see if a
string table was already loaded or not. Since this function returns
NULL always, this check became useless.
Change it to use ERR_reason_error_string() instead, as there's no
reason to believe we will get rid of reason strings, ever.
To top it off, we rebuild all affected C sources.
Fixes #9756
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9756)
|
|
KEYMGMT methods were attached to other methods after those were fully
created and registered, thereby creating a potential data race, if two
threads tried to create the exact same method at the same time.
Instead of this, we change the method creating function to take an
extra data parameter, passed all the way from the public fetching
function. In the case of EVP_KEYEXCH, we pass all the necessary data
that evp_keyexch_from_dispatch() needs to be able to fetch the
appropriate KEYMGMT method on the fly.
Fixes #9592
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9678)
|
|
Also added EVP_CTRL_RET_UNSUPPORTED define (so magic numbers can be removed)
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9464)
|
|
The biggest part in this was to move the key->param builder from EVP
to the DH ASN.1 method, and to implement the KEYMGMT support in the
provider DH.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9394)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9058)
|
|
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
|
|
The maximum key length for rc5 is 2040 bits so we should not attempt to
use keys longer than this.
Issue found by OSS-Fuzz and Guido Vranken.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8834)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
GH: #7651
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8808)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)
|
|
EVP_MD_fetch() can be given a property query string. However, there
are cases when it won't, for example in implicit fetches. Therefore,
we also need a way to set a global property query string to be used in
all subsequent fetches. This also applies to all future algorithm
fetching functions.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8681)
|
|
than the update call. The means an earlier error return at the cost of some
duplicated code.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8625)
|
|
Fixes #8565
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8604)
|
|
Limit the number of AES blocks in a data unit to 2^20 or less.
This corresponds to the mandates in IEEE Std 1619-2018 and NIST SP 800-38E.
Note: that this is a change from IEEE Std 1619-2007 which only recommended
this limit.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8627)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8513)
|
|
Changed PKEY/KDF API to call the new API.
Added wrappers for PKCS5_PBKDF2_HMAC() and EVP_PBE_scrypt() to call the new EVP KDF APIs.
Documentation updated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6674)
|
|
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
|
|
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
|
|
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7852)
|
|
[skip ci]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7794)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7597)
|
|
This is based on the latest EVP MAC interface introduced in PR #7393.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7459)
|
|
Remove GMAC demo program because it has been superceded by the EVP MAC one
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7548)
|
|
The MAC EVP_PKEY implementations are currently implemented for each
MAC. However, with the EVP_MAC API, only one such implementation is
needed.
This implementation takes into account the differences between HMAC
and CMAC implementations, and observes that all other current MAC
implementations seem to follow the HMAC model.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7393)
|