| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12847)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12708)
|
|
Fixes #12640
The X942-KDF is now indepedent of the CMS code (since it no longer uses CMS_SharedInfo_encode).
Any code related to EVP_PKEY_DH_KDF_X9_42 needs to not be wrapped by !defined(OPENSSL_NO_CMS).
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12642)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12575)
|
|
Similiar to ecdh this supports the legacy kdf inside the provider dh key exchange.
The supporting EVP_PKEY_CTX macros have been changed into mehtods and moved into dh_ctrl.c
New kdfs such as SSKDF should be done as a seperate pass after doing the derive.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12575)
|
|
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit 765d04c9460a304c8119f57941341a149498b9db.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
|
|
Fixes #11864
- The dsa keygen assumed valid p, q, g values were being passed. If this is not correct then it is
possible that dsa keygen can either hang or segfault.
The fix was to do a partial validation of p, q, and g inside the keygen.
- Fixed a potential double free in the dsa keypair test in the case when in failed (It should never fail!).
It freed internal object members without setting them to NULL.
- Changed the FFC key validation to accept 1024 bit keys in non fips mode.
- Added tests that use both the default provider & fips provider to test these cases.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12176)
|
|
The previous commit added the EVP_PKEY_CTX_[get|set]_group_name
functions to work with EC groups. We now extend that to also work for
DH.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11914)
|
|
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
|
|
The EVP_KDF_CTX_* functions have been relocated to the EVP_KDF_* namespace
for consistency.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11996)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12062)
|
|
EVP_PKEY_[get1|set1]_tls_encodedpoint() only worked if an ameth was present
which isn't the case for provided keys. Support has been added to dh,
ec and ecx keys.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11898)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11894)
|
|
Renamed some values in core_names i.e Some DH specific names were changed to use DH instead of FFC.
Added some strings values related to RSA keys.
Moved set_params related docs out of EVP_PKEY_CTX_ctrl.pod into its own file.
Updated Keyexchange and signature code and docs.
Moved some common DSA/DH docs into a shared EVP_PKEY-FFC.pod.
Moved Ed25519.pod into EVP_SIGNATURE-ED25519.pod and reworked it.
Added some usage examples. As a result of the usage examples the following change was also made:
ec allows OSSL_PKEY_PARAM_USE_COFACTOR_ECDH as a settable gen parameter.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11610)
|
|
This macro is used to determine if certain pieces of code should
become part of the FIPS module or not. The old name was confusing.
Fixes #11538
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11539)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)
|
|
DH_set0_pqg() is now responsible for caching the nid, q and length.
DH with or without named safe prime groups now default to using the maximum private key length (BN_num_bits(q) - 1)
when generating a DH private key. The code is now shared between fips and non fips mode for DH key generation.
The OSSL_PKEY_PARAM_DH_PRIV_LEN parameter can be used during keygen to override the maximum private key length to be
in the range (2 * strength ... bits(q) - 1). Where the strength depends on the length of p.
Added q = (p - 1) / 2 safe prime BIGNUMS so that the code is data driven (To simplify adding new names).
The BIGNUMS were code generated.
Fix error in documented return value for DH_get_nid
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11562)
|
|
Previously import_to just took an EVP_PKEY as the argument. However we
need to some additional context data as well - specifically the libctx.
Therefore we pass an EVP_PKEY_CTX instead to hold the combination of
both of these things.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11536)
|
|
Don't wrap conditionally-compiled files in global ifndef tests.
Instead, test if the feature is disabled and, if so, do not
compile it.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11263)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11332)
|
|
Moved some shared FFC code into the FFC files.
Added extra paramgen parameters for seed, gindex.
Fixed bug in ossl_prov util to print bignums.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11303)
|
|
The EC export_to function calls EC_POINT_point2buf that can later
generate a random number in some circumstances. Therefore we pass in a
BN_CTX associated with the library context. This means we have to change
the export_to function signature to accept the library context.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11493)
|
|
Since this is public, it is best to make the underlying structure opaque.
This means converting from stack allocation to dynamic allocation for all
usages.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
|
|
The catalyst for this is the difficult of passing BNs through the other
OSSL_PARAM APIs.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11390)
|
|
Downgrading EVP_PKEYs from containing provider side internal keys to
containing legacy keys demands support in the EVP_PKEY_ASN1_METHOD.
This became a bit elaborate because the code would be almost exactly
the same as the import functions int EVP_KEYMGMT. Therefore, we end
up moving most of the code to common backend support files that can be
used both by legacy backend code and by our providers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11375)
|
|
The export-to-provider functions for DH, DSA and EC_KEY assumed that a
public key is always present, and would fail if not. This blocks any
attempt to export a key structure with only domain parameters.
While fixing this, we also modify the selection declaration to
evp_keymgmt_import() to be more adaptive, the diverse selection bits
are now added when the corresponding data is added to the OSSL_PARAM
array.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11374)
|
|
in particular X509_NAME*, X509_STORE{,_CTX}*, and ASN1_INTEGER *,
also some result types of new functions, which does not break compatibility
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/10504)
|
|
Old files from the SSLeay 0.8.1b import that aren't used and don't seem to be
installed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11314)
|
|
This should have been publically present a long time ago, to be
consistent with the RSA, DSA and EC_KEY APIs. However, since we've
now deprecated that kind of function for the other key types, there's
no point in adding a public function, but we still need it internally.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)
|
|
The EVP_PKEY_ASN1_METHOD function export_to() must check that the key
we're trying to export has a known libcrypto method, i.e. is a built
in RSA_METHOD, DSA_METHOD, etc. Otherwise, the method may be defined
by the calling application, by an engine, by another library, and we
simply cannot know all the quirks hidden behind that method, if we
have access to the key data, or much anything.
Such keys are simply deemed impossible to export to provider keys,
i.e. have export_to() return 0. This cascades back to functions like
evp_pkey_export_to_provider() and evp_pkey_upgrade_to_provider() and
their callers. In most cases, this is fine, but if these get mixed in
with provider side keys in any function, that function will fail.
Fixes #11179
Fixes #9915
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11193)
|
|
Fixes #11108.
It only sets q if a valid named group is found.
The function signature was recently changed to pass a non const DH pointer
in order to allow the nid to be cached internally. As an extension of this
the value of q can now also be set as q is always known for named groups.
The length field is also set if q is set.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11114)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10911)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10952)
|
|
Use of the low level DH functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11024)
|
|
Embed libctx in dsa and dh objects and cleanup internal methods to not pass libctx (This makes it consistent with the rsa changes)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10910)
|
|
Use of the low level DSA functions has been informally discouraged for a
long time. We now formally deprecate them.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
|
|
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10964)
|
|
The KEYMGMT libcrypto <-> provider interface currently makes a few
assumptions:
1. provider side domain parameters and key data isn't mutable. In
other words, as soon as a key has been created in any (loaded,
imported data, ...), it's set in stone.
2. provider side domain parameters can be strictly separated from the
key data.
This does work for the most part, but there are places where that's a
bit too rigid for the functionality that the EVP_PKEY API delivers.
Key data needs to be mutable to allow the flexibility that functions
like EVP_PKEY_copy_parameters promise, as well as to provide the
combinations of data that an EVP_PKEY is generally assumed to be able
to hold:
- domain parameters only
- public key only
- public key + private key
- domain parameters + public key
- domain parameters + public key + private key
To remedy all this, we:
1. let go of the distinction between domain parameters and key
material proper in the libcrypto <-> provider interface.
As a consequence, functions that still need it gain a selection
argument, which is a set of bits that indicate what parts of the
key object are to be considered in a specific call. This allows
a reduction of very similar functions into one.
2. Rework the libcrypto <-> provider interface so provider side key
objects are created and destructed with a separate function, and
get their data filled and extracted in through import and export.
(future work will see other key object constructors and other
functions to fill them with data)
Fixes #10979
squash! Redesign the KEYMGMT libcrypto <-> provider interface - the basics
Remedy 1 needs a rewrite:
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11006)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10909)
|
|
It is better, safer and smaller to let the library routine handle the
strlen(3) call.
Added a note to the documentation suggesting this.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11019)
|
|
Usage of `NID_undef` symbol without including its definition was causing
a build fail
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10996)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10897)
|
|
This is required in order to share code for FIPS related parameter generation and validation routinues.
Note the 'counter' field is now stored as a integer (as that is the form required for generation/validation functions).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10860)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10826)
|
|
These fields are purely application data, and applications don't reach
into the bowels of the FIPS module, so these fields are never used
there.
Fixes #10835
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10837)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10760)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10364)
|
|
Free dukm in error handling of dh_cms_encrypt()
Fixes #10294
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
(Merged from https://github.com/openssl/openssl/pull/10310)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10169)
|
|
Add a new API to test for primes that can't be misused, deprecated the
old APIs.
Suggested by Jake Massimo and Kenneth Paterson
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #9272
|
