| Age | Commit message (Collapse) | Author |
|---|
|
Make all scripts produce .S, make interpretation of $(CFLAGS)
pre-processor's responsibility, start accepting $(PERLASM_SCHEME).
[$(PERLASM_SCHEME) is redundant in this case, because there are
no deviataions between Solaris and Linux assemblers. This is
purely to unify .pl->.S handling across all targets.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This gets rid of the BEGINRAW..ENDRAW sections in crypto/bn/build.info.
This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Some OSes, *cough*-dows, insist on stack being "wired" to
physical memory in strictly sequential manner, i.e. if stack
allocation spans two pages, then reference to farmost one can
be punishable by SEGV. But page walking can do good even on
other OSes, because it guarantees that villain thread hits
the guard page before it can make damage to innocent one...
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Most of the assembly uses constants from arm_arch.h, but a few references to
ARMV7_NEON don't. Consistently use the macros everywhere.
Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
and reorganize/harmonize post-conditions.
Additional hardening following on from CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
At the same time remove miniscule bias in final subtraction.
Performance penalty varies from platform to platform, and even with
key length. For rsa2048 sign it was observed to be 4% for Sandy
Bridge and 7% on Broadwell.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Performance penalty is 2%.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Performance penalty is 2% on Linux and 5% on Windows.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Performance penalty varies from platform to platform, and even
key length. For rsa2048 sign it was observed to reach almost 10%.
CVE-2016-0702
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
In the BN_hex2bn function the number of hex digits is calculated using
an int value |i|. Later |bn_expand| is called with a value of |i * 4|.
For large values of |i| this can result in |bn_expand| not allocating any
memory because |i * 4| is negative. This leaves ret->d as NULL leading
to a subsequent NULL ptr deref. For very large values of |i|, the
calculation |i * 4| could be a positive value smaller than |i|. In this
case memory is allocated to ret->d, but it is insufficiently sized
leading to heap corruption. A similar issue exists in BN_dec2bn.
This could have security consequences if BN_hex2bn/BN_dec2bn is ever
called by user applications with very large untrusted hex/dec data. This is
anticipated to be a rare occurrence.
All OpenSSL internal usage of this function uses data that is not expected
to be untrusted, e.g. config file data or application command line
arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be a rare.
Issue reported by Guido Vranken.
CVE-2016-0797
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
The entire contents of <internal/bn_conf.h> are unwanted in the UEFI
build because we have to do it differently there. To support building
for both 32-bit and 64-bit platforms without re-running the OpenSSL
Configure script, the EDK2 environment defines THIRTY_TWO_BIT or
SIXTY_FOUR_BIT for itself according to the target platform.
The current setup is broken, though. It checks for OPENSSL_SYS_UEFI but
before it's actually defined, since opensslconf.h hasn't yet been
included.
Let's fix that by including opensslconf.h. And also let's move the
bn_conf.h doesn't even need to *exist* in the UEFI build environment.
This is also GH PR736.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Remove some duplicated NULL/zero init.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This takes us away from the idea that we know exactly how our static
libraries are going to get used. Instead, we make them available to
build shareable things with, be it other shared libraries or DSOs.
On the other hand, we also have greater control of when the shared
library cflags. They will never be used with object files meant got
binaries, such as apps/openssl or test/test*.
With unified, we take this a bit further and prepare for having to
deal with extra cflags specifically to be used with DSOs (dynamic
engines), libraries and binaries (applications).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
All those flags existed because we had all the dependencies versioned
in the repository, and wanted to have it be consistent, no matter what
the local configuration was. Now that the dependencies are gone from
the versioned Makefile.ins, it makes much more sense to use the exact
same flags as when compiling the object files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
It seems that on some platforms, the perlasm scripts call the C
compiler for certain checks. These scripts need the environment
variable CC to have the C compiler command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Some files in crypto/bn depend on internal/bn_conf.h, and so does
test/bntest. Therefore, we add another inclusion directory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This also adds all the raw sections needed for some files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This also closes RT 4123
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Add new function BN_bn2binpad() which checks the length of the output
buffer and pads the result with zeroes if necessary.
New functions BN_bn2lebinpad() and BN_lebin2bn() which use little endian
format.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Now that we have the foundation for the "unified" build scheme in
place, we add build.info files. They have been generated from the
Makefiles in the same directories. Things that are platform specific
will appear in later commits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
The "unified" build scheme revolves around small information files,
build.info, which each describe their own bit of everything that needs
to be built, using a mini-language described in Configurations/README.
The information in build.info file contain references to source files
and final result. Object files are not mentioned at all, they are
simply from source files. Because of this, all the *_obj items in
Configurations/*.conf are renamed to *_asm_src and the files listed
in the values are change from object files to their corresponding
source files. For the sake of the other build schemes, Configure
generates corresponding *_obj entries in %target.
Furthermore, the "unified" build scheme supports having a build
directory tree separate from the source directry tree.
All paths in a build.info file is assumed to be relative to its
location, either within the source tree or within the build tree.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
There was an unused macro in ssl_locl.h that used an internal
type, so I removed it.
Move bio_st from bio.h to ossl_type.h
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The use of the uninitialized buffer in the RNG has no real security
benefits and is only a nuisance when using memory sanitizers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
This fixes clang compilation problem with size_t NUMPRIMES and int
loop counters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Also cleaned up bn_prime.pl to current coding style.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Move opensslconf.h.in to include/openssl.
Split off DES,BN,RC4 stuff into separate header file
templates in crypto/include/internal/*_conf.h.in
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Rename 'update' to 'generate'. Rather than recurse, just explicitly
call the three generate targets directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Remove lint, tags, dclean, tests.
This is prep for a new makedepend scheme.
This is temporary pending unified makefile, and might help it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Create Makefile's from Makefile.in
Rename Makefile.org to Makefile.in
Rename Makefiles to Makefile.in
Address review feedback from Viktor and Richard
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Provide backwards-compatiblity for functions, macros and include
files if OPENSSL_API_COMPAT is either not defined or defined less
than the version number of the release in which the feature was
deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Some URLs in the source code ended up getting mangled by indent. This fixes
it. Based on a patch supplied by Arnaud Lacombe <al@aerilon.ca>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Commit 2b0180c37fa6ffc48ee40caa831ca398b828e680 attempted to do this but
only hit one of many BN_mod_exp codepaths. Fix remaining variants and add
a test for each method.
Thanks to Hanno Boeck for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
RT#4171
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
and engage it in most modules.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Rename it to be an internal function bn_init.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
The function rsa_ossl_mod_exp uses the function BN_with_flags to create a
temporary copy (local_r1) of a BIGNUM (r1) with modified flags. This
temporary copy shares some state with the original r1. If the state of r1
gets updated then local_r1's state will be stale. This was occurring in the
function so that when local_r1 was freed a call to bn_check_top was made
which failed an assert due to the stale state. To resolve this we must free
local_r1 immediately after we have finished using it and not wait until the
end of the function.
This problem prompted a review of all BN_with_flag usage within the
codebase. All other usage appears to be correct, although often not
obviously so. This commit refactors things to make it much clearer for
these other uses.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
RT#4142
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@akamai.com>
RT #4100, MR #1264
|
|
The problem remained unnoticed so far, because it's never called by default.
You have to craft OPENSSL_ppccap environment variable to trigger the problem.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
