| Age | Commit message (Collapse) | Author |
|---|
|
If an alert gets sent and then we close the connection immediately with
data still in the input buffer then a TCP-RST gets sent. Some OSs
immediately abandon data in their input buffer if a TCP-RST is received -
meaning the alert data itself gets ditched. Sending a TCP-FIN before the
TCP-RST seems to avoid this.
This was causing test failures in MSYS2 builds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4333)
|
|
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3948)
|
|
BIO_sock_init returns '-1' on error, not '0', so it's needed to check
explicitly istead of using '!'.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3766)
|
|
We were incorrectly using "res" when we meant "ai"
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
The init_client() function in the apps sets up the client connection. It
may try multiple addresses until it finds one that works. We should clear
the error queue if we eventually get a successful connection because
otherwise we get stale errors hanging around. This can cause problems in
subsequent calls to SSL_get_error(), i.e. non-fatal NBIO events appear as
fatal.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Misc fixes for no-sock
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This replaces SHUTDOWN/SHUTDOWN2 with BIO_closesocket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Because some platforms won't will in any value in ai_protocol, there's
no point using it if we already know what it should be.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
It seems that some platforms' getaddrinfo don't fill in the
ai_protocol field properly. On those, the assertion
'protocol == BIO_ADDRINFO_protocol(res)' will fail. Best to remove
it.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
s_socket.c gets brutally cleaned out and now consists of only two
functions, one for client and the other for server. They both handle
AF_INET, AF_INET6 and additionally AF_UNIX where supported. The rest
is just easy adaptation.
Both s_client and s_server get the new flags -4 and -6 to force the
use of IPv4 or IPv6 only.
Also, the default host "localhost" in s_client is removed. It's not
certain that this host is set up for both IPv4 and IPv6. For example,
Debian has "ip6-localhost" as the default hostname for [::1]. The
better way is to default |host| to NULL and rely on BIO_lookup() to
return a BIO_ADDRINFO with the appropriate loopback address for IPv4
or IPv6 as indicated by the |family| parameter.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Except for VMS startup code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Don't check for NULL before calling OPENSSL_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Following ANSI C rules, remove the casts from calls to
OPENSSL_malloc and OPENSSL_realloc.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This should be a one off operation (subsequent invokation of the
script should not move them)
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This last one for this ticket. Removes WIN16.
So long, MS_CALLBACK and MS_FAR. We won't miss you.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
indent will not alter them when reformatting comments
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This commit removes MPE/iX
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Undo unapproved commit that removed DJGPP and WATT32
|
|
DJGPP is no longer a supported platform. Remove all #ifdef, etc.,
cases that refer to it. DJGPP also #define'd WATT32, so that
is now removed as well.
|
|
The "-unix <path>" argument allows s_server and s_client to use a unix
domain socket in the filesystem instead of IPv4 ("-connect", "-port",
"-accept", etc). If s_server exits gracefully, such as when "-naccept"
is used and the requested number of SSL/TLS connections have occurred,
then the domain socket file is removed. On ctrl-C, it is likely that
the stale socket file will be left over, such that s_server would
normally fail to restart with the same arguments. For this reason,
s_server also supports an "-unlink" option, which will clean up any
stale socket file before starting.
If you have any reason to want encrypted IPC within an O/S instance,
this concept might come in handy. Otherwise it just demonstrates that
there is nothing about SSL/TLS that limits it to TCP/IP in any way.
(There might also be benchmarking and profiling use in this path, as
unix domain sockets are much lower overhead than connecting over local
IP addresses).
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
|
|
|
|
|
|
There are certainly many more constifiable strings in the various
interfaces, which I hope to get to eventually.
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
|
|
Add correct flags for DTLS 1.2, update s_server and s_client to handle
DTLS 1.2 methods.
Currently no support for version negotiation: i.e. if client/server selects
DTLS 1.2 it is that or nothing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
knock-on work than expected - they've been extracted into a patch
series that can be completed elsewhere, or in a different branch,
before merging back to HEAD.
|
|
|
|
|
|
PR: 1307
Submitted by: Oliver Tappe <zooey@hirschkaefer.de>
|
|
|
