| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595
|
|
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #2083
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
The control commands that previously took a struct sockaddr * have
been changed to take a BIO_ADDR * instead.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
DTLS cookie generation and verification were exact copies of each
other save the last few lines. This refactors them to avoid code
copying.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
s_server was trying to set the ECDH curve when no-ec was defined. This also
highlighted the fact that the -no_ecdhe option to s_server is broken, and
doesn't make any sense any more (ECDHE is on by default and the only way it
can be disabled is through the cipherstring). Therefore this commit removes
the option.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
continue on from previous commits but in the apps directory
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
-Wincompatible-pointer-types-discards-qualifiers (the latter did not require
any code changes).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
After openssl_zalloc, cleanup more "set to 0/NULL" assignments.
Many are from github feedback.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Also known as RT 4106
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Except for VMS startup code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Typedef STRINT_PAIR to be the same as OPT_PAIR, and use that structure and
a bunch of tables instead of switch statements to lookup various values
out of the SSL/TLS message buffers. Shrinks a bunch of code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
clang says: "s_cb.c:958:9: error: implicitly declaring library function
'memcpy'"
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Many functions had a BIO* parameter, and it was always called
with bio_err. Remove the param and just use bio_err.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Ensure RAND_bytes return value is checked correctly, and that we no longer
use RAND_pseudo_bytes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Ensure that all libssl functions called from within the apps have their
return values checked where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Suggested by John Foley <foleyj@cisco.com>.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
An expired IETF Internet-Draft (seven years old) that nobody
implements, and probably just as good as NSA DRBG work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This should be a one off operation (subsequent invokation of the
script should not move them)
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This last one for this ticket. Removes WIN16.
So long, MS_CALLBACK and MS_FAR. We won't miss you.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
The only support for SSLv2 left is receiving a SSLv2 compatible client hello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
