summaryrefslogtreecommitdiffstats
path: root/apps/rsautl.c
AgeCommit message (Collapse)Author
2020-10-26APPS: Remove the format argument where it's not usedRichard Levitte
Also, restore a behaviour change, where load_cert() would look at stdin when the input file name is NULL, and make sure to call load_cert_pass() with a corresponding argument where load_cert() was used in OpenSSL 1.1.1. Fixes #13235 Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/13236)
2020-09-24load_key_certs_crls(): Restore output of fatal errorsDr. David von Oheimb
Also improve credentials loading diagnostics for many apps. Fixes #12840 Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/12893)
2020-05-15Use OSSL_STORE for load_{,pub}key() and load_cert() in apps/lib/apps.cDr. David von Oheimb
This also adds the more flexible and general load_key_cert_crl() as well as helper functions get_passwd(), cleanse(), and clear_free() to be used also in apps/cmp.c etc. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com> (Merged from https://github.com/openssl/openssl/pull/11755)
2020-04-23Update copyright yearMatt Caswell
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/11616)
2020-04-10Don't compile commands if disabledRich Salz
Rather than wrapping whole files in "ifndef OPENSSL_NO_xxx" we handle the changes in build.info Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/11250)
2020-03-07cmdline app: add provider commandline options.Pauli
Add a -provider option to allow providers to be loaded. This option can be specified multiple times. Add a -provider_path option to allow the path to providers to be specified. Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> (Merged from https://github.com/openssl/openssl/pull/11167)
2020-02-20Deprecate the low level RSA functions.Pauli
Use of the low level RSA functions has been informally discouraged for a long time. We now formally deprecate them. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/11063)
2019-11-08Add "sections" to -help outputRich Salz
Remove "Valid options" label, since all commands have sections (and [almost] always the first one is "General options"). Have "list --options" ignore section headers Reformat ts's additional help Add output section Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/9953)
2019-05-02Use vxRandLib for VxWorks7Klotz, Tobias
Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/8023)
2018-12-06Following the license change, modify the boilerplates in apps/Richard Levitte
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7765)
2018-02-13Update copyright yearMatt Caswell
Reviewed-by: Richard Levitte <levitte@openssl.org>
2018-01-31apps: Don't include progs.h in apps.hRichard Levitte
Everything in apps includes apps.h, because that one declares apps internal library routines. However, progs.h doesn't declare library routines, but rather the main commands and their options, and there's no reason why the library modules should include it. So, remove the inclusion of progs.h from apps.h and add that inclusion in all command source files. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5222)
2017-07-16Standardize apps use of -rand, etc.Rich Salz
Standardized the -rand flag and added a new one: -rand file... Always reads the specified files -writerand file Always writes to the file on exit For apps that use a config file, the RANDFILE config parameter reads the file at startup (to seed the RNG) and write to it on exit if the -writerand flag isn't used. Ensured that every app that took -rand also took -writerand, and made sure all of that agreed with all the documentation. Fix error reporting in write_file and -rand Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3862)
2017-06-12Clean up a bundle of codingstyle stuff in apps directoryPaul Yang
Mostly braces and NULL pointer check and also copyright year bump Signed-off-by: Paul Yang <paulyang.inf@gmail.com> Reviewed-by: Kurt Roeckx <kurt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3657)
2016-10-19If an engine comes up explicitely, it must also come down explicitelyRichard Levitte
In apps/apps.c, one can set up an engine with setup_engine(). However, we freed the structural reference immediately, which means that for engines that don't already have a structural reference somewhere else (because it's a built in engine), we end up returning an invalid reference. Instead, the function release_engine() is added, and called at the end of the routines that call setup_engine(). Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1643)
2016-10-14Constify command optionsFdaSilvaYY
Reviewed-by: Kurt Roeckx <kurt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1694)
2016-05-17Copyright consolidation 01/10Rich Salz
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-05-04GH932: Add more help messages to some apps options.FdaSilvaYY
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-22Remove unused parameters from internal functionsRich Salz
Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-02-20argv was set but unusedKurt Roeckx
Also gives an error message when you gave it a parameter it didn't expect. Reviewed-by: Rich Salz <rsalz@openssl.org> MR: #2009
2016-02-18GH681: More command help cleanupRich Salz
enc: - typo in -base64 option - missing help opt text ocsp, req, rsautl, s_client: - missing help opt text Signed-off-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-02-09Use NON_EMPTY_TRANSLATION_UNIT, consistently.Rich Salz
This also closes RT 4123 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-02-08Fix engine key support in utilities.Dr. Stephen Henson
Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-02Fix pkeyutl/rsautl empty encrypt-input/decrypt-output handlingViktor Dukhovni
Also fix option processing in pkeyutl to allow use of (formerly) "out-of-order" switches that were needless implementation limitations. Handle documented "ENGINE" form with -keyform and -peerform. Better handling of OPENSSL_NO_ENGINE and OPENSSL_NO_RSA. RT2018 Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-10-12Centralise loading default apps config fileMatt Caswell
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-09-06Change the way apps open their input and output filesRichard Levitte
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-05-29Restore module loadingRichard Levitte
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: Stephen Henson <steve@openssl.org>
2015-05-01free null cleanup finaleRich Salz
Don't check for NULL before calling OPENSSL_free Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-30In apps, malloc or dieRich Salz
No point in proceeding if you're out of memory. So change *all* OPENSSL_malloc calls in apps to use the new routine which prints a message and exits. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-25fewer NO_ENGINE #ifdef'sRich Salz
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-24Big apps cleanup (option-parsing, etc)Rich Salz
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb24 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: Matt Caswell <matt@openssl.org>
2015-03-05Unchecked malloc fixesMatt Caswell
Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error paths as I spotted them along the way. Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-01-22Run util/openssl-format-source -v -c .Matt Caswell
Reviewed-by: Tim Hudson <tjh@openssl.org>
2009-04-26Update from 1.0.0-stable.Dr. Stephen Henson
2008-11-05Update obsolete email address...Dr. Stephen Henson
2008-04-17Correctly handle case of bad arguments supplied to rsautlLutz Jänicke
PR: 1659
2005-07-16makeNils Larsch
./configure no-deprecated [no-dsa] [no-dh] [no-ec] [no-rsa] make depend all test work again PR: 1159
2005-05-28Update from 0.9.7-stable. Also repatch and rebuild error codes.Dr. Stephen Henson
2004-04-19header cleanup in apps/Geoff Thorpe
2003-09-21Add -passin support to rsautlDr. Stephen Henson
2003-01-30Add the possibility to build without the ENGINE framework.Richard Levitte
PR: 287
2002-08-01Make it possible to load keys from stdin, and restore thatRichard Levitte
functionality in the programs that had that before. Part fo PR 164
2002-02-22Config code updates.Dr. Stephen Henson
CONF_modules_unload() now calls CONF_modules_finish() automatically. Default use of section openssl_conf moved to CONF_modules_load() Load config file in several openssl utilities. Most utilities now load modules from the config file, though in a few (such as version) this isn't done because it couldn't be used for anything. In the case of ca and req the config file used is the same as the utility itself: that is the -config command line option can be used to specify an alternative file.
2002-01-25I must learn to compile before I commit...Richard Levitte
2002-01-25Add -keyform. Document -engine.Richard Levitte
2001-09-12Reduce the header dependencies on engine.h in apps/.Geoff Thorpe
2001-06-18Provide an application-common setup function for engines and use itRichard Levitte
everywhere.
2001-05-30Extend all the loading functions to take an engine pointer, a passRichard Levitte
string (some engines may have certificates protected by a PIN!) and a description to put into error messages. Also, have our own password callback that we can send both a password and some prompt info to. The default password callback in EVP assumes that the passed parameter is a password, which isn't always the right thing, and the ENGINE code (at least the nCipher one) makes other assumptions... Also, in spite of having the functions to load keys, some utilities did the loading all by themselves... That's changed too.
2001-02-20Use new-style system-id macros everywhere possible. I hope I haven'tRichard Levitte
missed any. This compiles and runs on Linux, and external applications have no problems with it. The definite test will be to build this on VMS.
2001-02-19Make all configuration macros available for application by makingRichard Levitte
sure they are available in opensslconf.h, by giving them names starting with "OPENSSL_" to avoid conflicts with other packages and by making sure e_os2.h will cover all platform-specific cases together with opensslconf.h. I've checked fairly well that nothing breaks with this (apart from external software that will adapt if they have used something like NO_KRB5), but I can't guarantee it completely, so a review of this change would be a good thing.
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-22 10:49:43 +0000