Age | Commit message (Collapse) | Author |
|
Note: It seems like the C compiler doesn't care about the duplicate.
(The first definition is eight lines above.) The C++ compiler however
didn't like it when I reused the tracing code snippets elsewhere.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22117)
|
|
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes
|
|
Just like --help is explicitly supported, we should support --version.
This will greatly ease people adopting openssl.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20936)
|
|
dup_bio_err() can return a BIO chain when 'OPENSSL_SYS_VMS' is defined.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19446)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16450)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15847)
|
|
has literal prefix
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15847)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16316)
|
|
This avoids a crash in e.g. `openssl chacha20` as reported by
Steffen Nurpmeso on openssl-users.
Resolves: #16713
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/16714)
|
|
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14840)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13999)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13799)
|
|
diagnostic/help output
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13799)
|
|
Make sure all commands check to see if there are any "extra" arguments
after the options, and print an error if so.
Made all error messages consistent (which is to say, minimal).
Fixes: #13527
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13563)
|
|
The idea is to be able to have our apps load engine keys using a URI:
org.openssl.engine:{engineid}:{keyid}
This is legacy, but added for the time being to support keys given to
the application like this:
-engine {engineid} -key {keyid} -keyform ENGINE
This latter form is recognised internally, and rewritten into the URI
form.
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/13570)
|
|
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
|
|
[extended tests]
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/13047)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12493)
|
|
Added RSA oaep test that uses the pkeyutl application.
Added an openssl application option to support loading a (fips) provider via the '-config' option.
Added openssl application related environment variable 'OPENSSL_TEST_LIBCTX' (for testing purposes only),
that creates a non default library context.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11948)
|
|
Remove code in help_main() that duplicates the case when 'openssl' is
called with no arguments, which is now handled in main().
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12295)
|
|
NULL terminate the built in "help" argv array to avoid
reading beyond the end.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/12258)
|
|
Invoking help with "empty" argc leads to a segfault.
Invoke do_cmd() with help as argument which invokes help_main() with
proper argv.
Fixes #12069
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12070)
|
|
This is a result of removal of interactive mode.
Redirected it to now use 'openssl help'.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12164)
|
|
This mode is severely untested and unmaintained, is seems not to be
used very much.
Closes #4679
Closes #6292
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12023)
|
|
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11983)
|
|
This is left over from the past.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11995)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11225)
|
|
DES, idea, seed, rc2, rc4, rc5, cast and blowfish have been moved out of the default provider.
Code shared between desx and tdes has been moved into a seperate file (cipher_tdes_common.c).
3 test recipes failed due to using app/openssl calls that used legacy ciphers.
These calls have been updated to supply both the default and legacy providers.
Fixed openssl app '-provider' memory leak
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11419)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10977)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10531)
|
|
Fixes #8322
The leak-checking (and backtrace option, on some platforms) provided
by crypto-mdebug and crypto-mdebug-backtrace have been mostly neutered;
only the "make malloc fail" capability remains. OpenSSL recommends using
the compiler's leak-detection instead.
The OPENSSL_DEBUG_MEMORY environment variable is no longer used.
CRYPTO_mem_ctrl(), CRYPTO_set_mem_debug(), CRYPTO_mem_leaks(),
CRYPTO_mem_leaks_fp() and CRYPTO_mem_leaks_cb() return a failure code.
CRYPTO_mem_debug_{malloc,realloc,free}() have been removed. All of the
above are now deprecated.
Merge (now really small) mem_dbg.c into mem.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10572)
|
|
The function OPENSSL_buf2hexstr() can return NULL if it fails to allocate
memory so the callers should check its return value.
Fixes #10525
Reported-by: Ziyang Li (@Liby99)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10526)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10495)
|
|
Add documentation for all commands that have parameters.
Fix a couple of minor doc and programming bugs, too.
Fixes #10313
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10371)
|
|
Remove "Valid options" label, since all commands have sections (and
[almost] always the first one is "General options").
Have "list --options" ignore section headers
Reformat ts's additional help
Add output section
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9953)
|
|
The HEADER_X509_H check is redundant, because <openssl/x509.h>
is already included.
Instead of of checking for HEADER_SSL_H, include <openssl/ssl.h>
explicitly in "s_apps.h" and don't include "s_apps.h" where it's
not necessary.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9364)
|
|
That makes it easier to work with than going through apps/openssl.c
This also moves the implementation of calculate_columns() and makes it
generally accessible.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9340)
|
|
This makes for a cleaner apps/progs.h as well as as cleaner
apps/build.info.
We also break out the type declarations to apps/include/function.h
apps/progs.c and apps/progs.h are NOT regenerated when 'apps' is
disabled.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9340)
|
|
Remove the union that effectively cast thread IDs to long integers before
display and instead print a hex dump of the entire object.
Refer #9191
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9194)
|
|
It turned out that the internal trace cleanup handler was added too
late, so it would be executed before OPENSSL_cleanup().
This results in address errors, as the trace code that's executed in
OPENSSL_cleanup() itself tries to reach for data that's been freed at
that point.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9196)
|
|
It seems more intuitive to set `OPENSSL_TRACE=all` instead of
`OPENSSL_TRACE=any` to obtain trace output for all categories.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
|
|
Previously, if the openssl application was run with OPENSSL_TRACE=any,
all trace output would just show 'ANY' as the category name, which was
not very useful. To get the correct category name printed in the trace
output, the openssl application now registers separate channels for
each category.
The trace API is unchanged, it is still possible for an application to
register a single channel for the 'ANY' category to see all outputt,
if it does not need this level of detail.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
|
|
Partially reverts d33d76168fb7 Don't fail when tracing is disabled
Commit d33d76168fb7 fixed the problem that the initialization of
libcrypto failed when tracing was disabled, because the unoperational
ossl_trace_init() function returned a failure code. The problem was
fixed by changing its return value from failure to success.
As part of the fix the return values of other unimplemented trace API
functions (like OSSL_trace_set_channel(),OSSL_trace_set_callback())
was changed from failure to success, too. This change was not necessary
and is a bit problematic IMHO, because nobody expects an unimplemented
function to pretend it succeeded.
It's the application's duty to handle the case correctly when the trace
API is not enabled (i.e., OPENSSL_NO_TRACE is defined), not the API's job
to pretend success just to prevent the application from failing.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8552)
|
|
Fixes #4856
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1928)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8611)
|
|
It is important that output to the trace channels occurs only inside
a trace group. This precondtion is satisfied whenever the standard
TRACE macros are used. It can be violated only by a bad programming
mistake, like copying the 'trc_out' pointer and using it outside
the trace group.
This commit enforces correct pairing of the OSSL_TRACE_CTRL_BEGIN and
OSSL_TRACE_CTRL_END callbacks, and checks that OSSL_TRACE_CTRL_WRITE
callbacks only occur within such groups.
While implementing it, it turned out that the group assertion failed
apps/openssl.c:152: OpenSSL internal error: \
Assertion failed: trace_data->ingroup
because the set_trace_data() function invokes some callbacks which
generate trace output, but the correct channel type was set only
after the set_trace_data() call.
To fix the failed assertions, the correct channel type is now set
inside the set_trace_data() call, instead of doing it afterwards.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
|
|
The openssl app registers trace callbacks which automatically
set a line prefix in the OSSL_TRACE_CTRL_BEGIN callback.
This prefix needs to be cleared in the OSSL_TRACE_CTRL_END
callback, otherwise a memory leak is reported when openssl
is built with crypto-mdebug enabled.
This leak causes the tests to fail when tracing and memory
debugging are enabled.
The leak can be observed by any command that produces trace
output, e.g. by
OPENSSL_TRACE=ANY util/shlib_wrap.sh apps/openssl version
...
[00:19:14] 4061 file=apps/bf_prefix.c, line=152, ...
26 bytes leaked in 1 chunks
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
|
|
All other instances are OPENSSL_NO_ENGINE without the trailing "S".
Fixes build when configured with no-engine.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8449)
|