Age | Commit message (Collapse) | Author |
|
Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.
RT#4085
RT#4086
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
If the output to stdout or the input from stdin is meant to be binary,
it's deeply unsetting to get the occasional LF converted to CRLF or
the other way around. If someone happens to forget to redirect stdin
or stdout, they will get gibberish anyway, line ending conversion will
not change that.
Therefore, let's not have dup_bio_* decide unilaterally what mode the
BIO derived from stdin and stdout, and rather let the app decide by
declaring the intended format.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Don't check for NULL before calling OPENSSL_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
No point in proceeding if you're out of memory. So change
*all* OPENSSL_malloc calls in apps to use the new routine which
prints a message and exits.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free
BIO_free BIO_free_all BIO_vfree
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This last one for this ticket. Removes WIN16.
So long, MS_CALLBACK and MS_FAR. We won't miss you.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR: 1061
|
|
|
|
|
|
Use BUF_strlcat() instead of strcat().
Use BIO_snprintf() instead of sprintf().
In some cases, keep better track of buffer lengths.
This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
|
|
|
|
|
|
PR: 287
|
|
testing availability of engines with "-t" - the old behaviour of is
produced by increasing the feature's verbosity with "-tt".
|
|
exit() in whatever way works for the intended platform, and define
OPENSSL_EXIT() to have the old meaning (the name is of course because
it's only used in the openssl program)
|
|
CONF_modules_unload() now calls CONF_modules_finish()
automatically.
Default use of section openssl_conf moved to
CONF_modules_load()
Load config file in several openssl utilities.
Most utilities now load modules from the config file,
though in a few (such as version) this isn't done
because it couldn't be used for anything.
In the case of ca and req the config file used is
the same as the utility itself: that is the -config
command line option can be used to specify an
alternative file.
|
|
get listed as well.
|
|
ciphers.
|
|
|
|
crypto/engine/README for details.
|
|
|
|
to go the monolith way (does anyone do that these days?).
NOTE: a few applications are missing in this commit. I've a few more
changes in them that I haven't tested yet.
|
|
commands appropriately.
|
|
|
|
define LLONG properly for VC++.
stop compiler complaining about signed/unsigned mismatch in apps/engine.c
|
|
ENGINE.
* Extra verbosity can be added with more "v"'s, eg. '-vvv' gives
information about input flags and descriptions for each control command
in each ENGINE. Check the output of "openssl engine -vvv" for example.
* '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on
the specified ENGINE (or on all of them if no engine id is specified,
although that usually gets pretty ugly). '-post' commands are only
attempted if '-t' is specified and the engine successfully initialises.
'-pre' commands are always attempted whether or not '-t' causes an
initialisation to be tried afterwards. Multiple '-pre' and/or '-post'
commands can be specified and they will be called in the order they
occur on the command line.
Parameterised commands (the normal case, there are currently no
unparameterised ones) are split into command and argument via a separating
colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in
the call;
ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0);
Application code should similarly allow arbitrary name-value string pairs
to be passed into ENGINEs in a manner matching that in apps/engine.c,
either using the same colon-separated format, or entered as two distinct
strings. Eg. as stored in a registry. The last parameter of
ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should
only be attempted if it's supported by the specified ENGINE (eg. for
commands like "FORK_CHECK:1" that may or may not apply to the run-time
ENGINE).
|
|
missed any.
This compiles and runs on Linux, and external applications have no
problems with it. The definite test will be to build this on VMS.
|
|
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
I've checked fairly well that nothing breaks with this (apart from
external software that will adapt if they have used something like
NO_KRB5), but I can't guarantee it completely, so a review of this
change would be a good thing.
|
|
Fix warning in apps/engine.c
Remove definitions of deleted functions.
Add missing definition of X509_VAL.
|
|
|
|
load the "external" built-in engines (those that require DSO). This
makes linking with libdl or other dso libraries non-mandatory.
Change 'openssl engine' accordingly.
Change the engine header files so some declarations (that differed at
that!) aren't duplicated, and make sure engine_int.h includes
engine.h. That way, there should be no way of missing the needed
info.
|
|
implementation is contained in the application, and the capability
string building part should really be part of the engine library.
This is therefore an experimental hack, and will be changed in the
near future.
|
|
|
|
|
|
|