| Age | Commit message (Collapse) | Author |
|---|
|
Also gives an error message when you gave it a parameter it didn't expect.
Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #2009
|
|
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
|
|
Loading the config file after processing command line options can
cause problems, e.g. where an engine provides new ciphers/digests
these are not then recoginised on the command line. Move the
default config file loading to before the command line option
processing. Whilst we're doing this we might as well centralise
this instead of doing it individually for each application. Finally
if we do it before the OpenSSL_add_ssl_algorithms() call then
ciphersuites provided by an engine (e.g. GOST) can be available to
the apps.
RT#4085
RT#4086
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
For those command line options that take the verification options
-CApath and -CAfile, if those options are absent then the default path or
file is used instead. It is not currently possible to specify *no* path or
file at all. This change adds the options -no-CApath and -no-CAfile to
specify that the default locations should not be used to all relevant
applications.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
There's no reason why we should default to a output format that is
old, and confusing in some cases.
This affects the commands "ca", "crl", "req" and "x509".
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Here are the "rules" for handling flags that depend on #ifdef:
- Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd
entries appear at the end; by convention "engine" is last. This
ensures that at run-time, the flag will never be recognized/allowed.
The next two bullets entries are for silencing compiler warnings:
- In the while/switch parsing statement, use #ifdef for the body to
disable it; leave the "case OPT_xxx:" and "break" statements outside
the ifdef/ifndef. See ciphers.c for example.
- If there are multiple options controlled by a single guard, OPT_FOO,
OPT_BAR, etc., put a an #ifdef around the set, and then do "#else"
and a series of case labels and a break. See OPENSSL_NO_AES in cms.c
for example.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This is merges the old "rsalz-monolith" branch over to master. The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt. Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that. There have been many other changes and code-cleanup, see
bullet list below.
Special thanks to Matt for the long and detailed code review.
TEMPORARY:
For now, comment out CRYPTO_mem_leaks() at end of main
Tickets closed:
RT3515: Use 3DES in pkcs12 if built with no-rc2
RT1766: s_client -reconnect and -starttls broke
RT2932: Catch write errors
RT2604: port should be 'unsigned short'
RT2983: total_bytes undeclared #ifdef RENEG
RT1523: Add -nocert to fix output in x509 app
RT3508: Remove unused variable introduced by b09eb24
RT3511: doc fix; req default serial is random
RT1325,2973: Add more extensions to c_rehash
RT2119,3407: Updated to dgst.pod
RT2379: Additional typo fix
RT2693: Extra include of string.h
RT2880: HFS is case-insensitive filenames
RT3246: req command prints version number wrong
Other changes; incompatibilities marked with *:
Add SCSV support
Add -misalign to speed command
Make dhparam, dsaparam, ecparam, x509 output C in proper style
Make some internal ocsp.c functions void
Only display cert usages with -help in verify
Use global bio_err, remove "BIO*err" parameter from functions
For filenames, - always means stdin (or stdout as appropriate)
Add aliases for -des/aes "wrap" ciphers.
*Remove support for IISSGC (server gated crypto)
*The undocumented OCSP -header flag is now "-header name=value"
*Documented the OCSP -header flag
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This removes all code surrounded by '#ifdef undef'
One case is left: memmove() replaced by open-coded for loop,
in crypto/stack/stack.c That needs further review.
Also removed a couple of instances of /* dead code */ if I saw them
while doing the main removal.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
New -hash_old to generate CRL hashes using old
(before OpenSSL 1.0.0) algorithm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PR:917
Sumbmitted by: Michael Konietzka <konietzka@schlund.de>
|
|
PR: 560
|
|
exit() in whatever way works for the intended platform, and define
OPENSSL_EXIT() to have the old meaning (the name is of course because
it's only used in the openssl program)
|
|
'hidden' -nameopt support. (Robert Joop <joop@fokus.gmd.de>)
|
|
CONF_modules_unload() now calls CONF_modules_finish()
automatically.
Default use of section openssl_conf moved to
CONF_modules_load()
Load config file in several openssl utilities.
Most utilities now load modules from the config file,
though in a few (such as version) this isn't done
because it couldn't be used for anything.
In the case of ca and req the config file used is
the same as the utility itself: that is the -config
command line option can be used to specify an
alternative file.
|
|
See the commit log message for that for more information.
NB: X509_STORE_CTX's use of "ex_data" support was actually misimplemented
(initialisation by "memset" won't/can't/doesn't work). This fixes that but
requires that X509_STORE_CTX_init() be able to handle errors - so its
prototype has been changed to return 'int' rather than 'void'. All uses of
that function throughout the source code have been tracked down and
adjusted.
|
|
to go the monolith way (does anyone do that these days?).
NOTE: a few applications are missing in this commit. I've a few more
changes in them that I haven't tested yet.
|
|
missed any.
This compiles and runs on Linux, and external applications have no
problems with it. The definite test will be to build this on VMS.
|
|
|
|
record-oriented fashion. That means that every write() will write a
separate record, which will be read separately by the programs trying
to read from it. This can be very confusing.
The solution is to put a BIO filter in the way that will buffer text
until a linefeed is reached, and then write everything a line at a
time, so every record written will be an actual line, not chunks of
lines and not (usually doesn't happen, but I've seen it once) several
lines in one record. Voila, BIO_f_linebuffer() is born.
Since we're so close to release time, I'm making this VMS-only for
now, just to make sure no code is needlessly broken by this. After
the release, this BIO method will be enabled on all other platforms as
well.
|
|
|
|
-Wcast-align
-Wmissing-prototypes -Wmissing-declarations -Wnested-externs -Winline''.
|
|
code.
Remove references to 'TXT' in -inform and -outform switches.
|
|
|
|
|
|
|
|
and to lots of PEM_... functions.
Submitted by: Damien Miller <dmiller@ilogic.com.au>
|
|
|
|
Submitted by:
Reviewed by:
PR:
|
|
|
|
option at all and this way the `-noout -text' combination was inconsistent in
`openssl crl' with the friends in `openssl x509|rsa|dsa'.
|
|
to support CRL extensions.
|
|
GeneralizedTime.
|
|
|
|
|
|
|
