Age | Commit message (Collapse) | Author |
|
The build was breaking due to a Makefile recipe expecting an openssl
version to be on the PATH with support for the rehash command.
Reviewed-by: Ben Laurie <ben@openssl.org>
|
|
On Unix/Linux platforms, merge c_rehash script into openssl as a
C program.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Instead of piping through tardy, and possibly suffering from bugs in certain
versions, use --transform, --owner and --group directly with GNU tar (we
already expect that tar variant).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
There's a need for a target that will build all of libcrypto, so let's
add 'build_libcrypto' that does this. For ortogonality, let's also
add 'build_libssl'. Have both also depend on 'libcrypto.pc' and
'libssl.pc' so those get built together with the libraries.
This makes 'all' depend on fewer things directly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in. This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.
This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Following on from the removal of libcrypto and libssl support for Kerberos
this commit removes all remaining references to Kerberos.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Remove libcrypto support for Kerberos following on from the previous commit
which removed it from libssl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
ONEDIRS, EDIRS and WDIRS aren't used anywhere. Most probably remains
from a build system of the past, it's time they get put to rest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz
|
|
Cleanup of files that haven't been used, touched, or I suspect, even
noticed for a long time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Don't complain about missing config file.
(Got the right env var name this time)
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Set config to /dev/null when doing make rehash.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
With no more symlinks, there's no need for those variables, or the links
target. This also goes for all install: and uninstall: targets that do
nothing but copy $(EXHEADER) files, since that's now taken care of by the
top Makefile.
Also, removed METHTEST from test/Makefile. It looks like an old test that's
forgotten...
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Rather than making include/openssl/foo.h a symlink to
crypto/foo/foo.h, this change moves the file to include/openssl/foo.h
once and for all.
Likewise, move crypto/foo/footest.c to test/footest.c, instead of
symlinking it there.
Originally-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Configure would load the glob "Configurations*". The problem with
this is that it also loads all kinds of backups of those
configurations that some editors do, like emacs' classic
'Configurations~'. The solution is to give them an extension, such as
'.conf', and make sure to end the glob with that.
Also, because 'Configurations.conf' makes for a silly name, and
because a possibly large number of configurations will become clutter,
move them to a subdirectory 'Configurations/', and rename them to
something more expressive, as well as something that sets up some form
of sorting order. Thus:
Configurations -> Configurations/10-main.conf
Configurations.team -> Configurations/90-team.conf
Finally, make sure that Configure sorts the list of files that 'glob'
produces, and adapt Makefile.org.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Move the build configuration table into separate files. The Configurations
file is standard configs, and Configurations.team is for openssl-team
members. Any other file, Configurations*, found in the same directory
as the Configure script, is loaded.
To add another file, use --config=FILE flags (which should probably be
an absolute path).
Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz
<rsalz@openssl.org>, contributed by Akamai Technologies.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
TABLE wasn't updated from a previous Configure change
Missed an RMD160/RIPE/RIPEMD unification in mkdef.pl
Makefile install_sw referenced file doc/openssl-shared.txt (RT3686)
Needed to run 'make update' because
- Various old code has been removed
- Varous old #ifdef tests were removed
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Remove fips_algvs.c
Remove unused fips module build code from Configure and Makefile.org
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Add INSTALLDIRS variable, list of directories where things get
installed. Change install_html_docs to use perl mkdir-p script.
Add uninstall, uninstall_sw, uninstall_docs, uninstall_html_docs
to Makefile.org. The actions of these targets were figured out
by "inverting" the install target.
Recurse into subdirs to do uninstall as needed. Added uninstall
targets whose actions were similarly figured out by "inverting"
the install target.
Also remove some 'space before tab' complaints in Makefile.org
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Doing 'config ; make clean' broke because clean removed
header files that normal build didn't create. So don't
remove those files. Hopefully will be better addressed by
Geoff's no-symlinks patch.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
Some Makefiles had actions for "dclean" that really belonged
to the "clean" target. This is wrong because clean ends up,
well, not really cleaning everything.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Include Richard's point to remove the 'sh -c' wrapper
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Andy pointed out there is also darwin64, so tweak the pattern.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Add Darwin to list of case-insensitive filenames when
installing manapges. When doing this, I noticed that
we weren't setting "filecase" for the HTML doc install.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
In Makefile, when build manpages, put the current directory
at the start of the podpath so that cross-refs find the
local directory first.
Reviewed-by: Tim Hudson <tjh@cryptosoft.com>
|
|
This reverts commit 691edc997a35682eb7fa29445036182d2c9eb1de.
|
|
Add darwin-*-cc as one of the systems for case-insensitive
filenames. Fixes the manpage install so it doesn't create
looping symlinks.
|
|
various link settings. PR#3332
|
|
PR: 3271
|
|
PR#3253
|
|
|
|
PR: 3110
Submitted by Corinna Vinschen.
|
|
|
|
errors added
|
|
PR: 2793
|
|
Submitted by: Tomas Mraz <tmraz@redhat.com>
Move libraries that are not needed for dynamic linking to Libs.private in
the .pc files
|
|
|
|
|
|
|
|
Revert change to Makefile.org: it breaks install.
|
|
|