Age | Commit message (Collapse) | Author |
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1514)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)
|
|
libssl, not libddl.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1871)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1849)
|
|
Added the file README.external which describes how to build and run OpenSSL
to use the BoringSSL test suite. Also updated INSTALL to point to it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Don't build ossl_shim by default. Switch it on through
enable-external-tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Also we disable TLS1.3 by default (use enable-tls1_3 to re-enable). This is
because this is a WIP and will not be interoperable with any other TLS1.3
implementation.
Finally, we fix some tests that started failing when TLS1.3 was disabled by
default.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This reverts commit ca1574cec20589885000d039eed3a9375fb29a0d.
Not suitabled for a minor release as it breaks the ABI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Make it clear that the OPENSSL_LOCAL_CONFIG_DIR settings take
precedence over the in-tree configs.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1798)
|
|
This is overdue since the addition of the unified build system
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1767)
|
|
no-rsa is no longer an option since 7ec8de1
Fix a typo about poly1305
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1582)
|
|
Traditionally Configure passed $ENV{PERL} to Makefile. But this
resulted in ambiguilty as Configure script could be executed by
interpreter different from one executing remaining scripts. Since
we separate compile- and run-time interpreters with HASHBANGPERL
variable, there is no reason to segment the build procedure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
This reverts commit 7f9ae88817ddf0aac5c6bd95d9a5af1c54ed5bbf.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
I bug in perl's File::Spec->canonpath() was uncovered. There's
nothing we can do about it (except re-implementing canonpath()),
except working around the problem (a directory rename) and reporting
the issue to the perl module developers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The diverse notations used in INSTALL are not as self explanatory as
we might imagine, so let's attempt a consistent notation for mandatory
and optional pieces of a command line, and to explain the meaning of
each notation.
This does away with the bash notation used in one spot, as it isn't
universally understood and will only confuse the unknowing more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Make it possible to have a separate and different perl command string
for installable scripts than we use when building, with the
environment variable HASHBANGPERL. Its value default to the same as
the environment PERL if it's defined, otherwise '/usr/bin/env perl'.
Note: this is only relevant for Unix-like environments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1245)
|
|
Fill out the INSTALL instructions with more information on Configure
arguments, environment variables and Makefile targets.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Include a note in INSTALL that tests must be run from an unprivileged
process.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
README is a fairly independent document, and so is INSTALL. NOTES are
merely addendums to INSTALL. Therefore , INSTALL.DJGPP and
README.PERL get renamed to NOTES.DJGPP and NOTES.PERL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
With Unixly Makefiles as well as with nmake, make variables are
transferred to the shell running the commands as envinronment
variables. This principle doesn't apply with MMS, so we must
explicitely define VERBOSE as commands when it's needed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
PR#4462
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
It was added as part of 2df84dd3299ff25fa078ca7ffbdeaac65b361feb
but has never actually been used for anything; presumably it was
a typo for one of SCTP or CT.
This removes the last '??' entry from INSTALL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
In most cases we expect that people will be using shared libraries not
static ones, therefore we make that the default.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Update the config options documentation based on feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
There were a lot of options missing from INSTALL. This adds descriptions
for them.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
- on VMS, SYS$COMMON:[SSL] is already used as installation directory
by HP SSL, so we make our default for --openssldir
SYS$COMMON:[OPENSSL-COMMON] instead.
- Updated notes on default installation dirs fir Unix and Windows
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
On Windows, we set INSTALLTOP to default as follows:
VC-WIN32:
PREFIX: %ProgramFiles(x86)%\OpenSSL
OPENSSLDIR: %CommonProgramFiles(x86)%\SSL
VC-WIN64*:
PREFIX: %ProgramW6432%\OpenSSL
OPENSSLDIR: %CommonProgramW6432%\SSL
Should those environment variables be missing, the following is used
as fallback:
PREFIX: %ProgramFiles%\OpenSSL
OPENSSLDIR: %CommonProgramFiles%\SSL
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
A few things were out of date and a few things were missing. Also some
formatting updates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The summary on how to add configs and how Makefile et al wasn't quite
correct any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Because of the unified scheme, building on different platforms is very
similar. We currently have Unix and OpenVMS on the unified scheme,
which means that a separate INSTALL.VMS is no longer needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.
The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Fixes for the auto-init/deinit code based on review comments
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Provide some man pages for auto-init/deinit. Also update the INSTALL
documentation for information on the new Configure options implemented as
part of this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This includes a start on how to install missing modules.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|