| Age | Commit message (Collapse) | Author |
|---|
|
In order to receive warnings on unused function return values the flag
-DDEBUG_UNUSED must be passed to the compiler. This change adds that for the
--strict-warnings Configure option.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Using $t is an artifact from the earlier changes in Configure and was
unfortunately forgotten as is.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
[cl]flags
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
./config would translate -d into having the target get a 'debug-'
prefix, and then run './Configure LIST' to find out if such a
debugging target exists or not.
With the recent changes, the separate 'debug-foo' targets are
disappearing, and we're giving the normal targets debugging
capabilities instead. Unfortunately, './config' wasn't changed to
match this new behavior.
This change introduces the arguments '--debug' and '--release' - the
latter just for orthogonality - to ./Configure, and ./config now
treats -d by adding '--debug' to the options for ./Configure.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
As part of this, remove some levitte examples that never were relevant.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Because base templates express inheritance of values, the attribute is
renamed to 'inherit_from', and texts about this talk about 'inheritance(s)'
rather than base templates.
As they were previously implemented, base templates that were listed
together would override one another, the first one acting as defaults for
the next and so on.
However, it was pointed out that a strength of inheritance would be to
base configurations on several templates - for example one for CPU, one
for operating system and one for compiler - and that requires a different
way of combining those templates. With this change, inherited values
from several inheritances are concatenated by default (keep on reading).
Also, in-string templates with the double-curly syntax are removed,
replaced with the possibility to have a configuration value be a coderef
(i.e. a 'sub { /* your code goes here */ }') that gets the list of values
from all inheritances as the list @_. The result of executing such a
coderef on a list of values is assumed to become a string. ANY OTHER
FORM OF VALUE WILL CURRENTLY BREAK.
As a matter of fact, an attribute in the current config with no value is
assumed to have this coderef as value:
sub { join(' ', @_) }
While we're at it, rename debug-[cl]flags to debug_[cl]flags and
nodebug-[cl]flags to release_[cl]flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Base templates are templates that are used to inherit from. They can
loosely be compared with parent class inheritance in object orientation.
They can be used for the same purpose as the variables with multi-field
strings are used in old-style string configurations.
Base templates are declared with the base_templates configuration
attribute, like so:
"example_target" => {
base_templates => [ "x86_asm", ... ]
...
}
Note: The value of base_templates MUST be an array reference (an array
enclosed in square brackets).
Any configuration target can be used as a base template by another. It
is also possible to have a target that's a pure template and not meant to
be used directly as a configuration target. Such a target is marked with
the template configuration attribute, like so:
"example_template" => {
template => 1,
cc => "mycc",
...
},
As part of this commit, all variables with multi-field strings have been
translated to pure templates. The variables currently remain since we
can't expect people to shift to hash table configurations immediately.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Template references are words with double brackets, and refer to the
same field in the target pointed at the the double bracketed word.
For example, if a target's configuration has the following entry:
'cflags' => '-DFOO {{x86_debug}}'
... then {{x86_debug}} will be replaced with the 'cflags' value from
target 'x86_debug'.
Note: template references are resolved recursively, and circular
references are not allowed
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
The reasoning is that configuration strings are hard to read and error
prone, and that a better way would be for them to be key => value hashes.
Configure is made to be able to handle target configuration values as a
string as well as a hash. It also does the best it can to combine a
"debug-foo" target with a "foo" target, given that they are similar
except for the cflags and lflags values. The latter are spliced into
options that are common for "debug-foo" and "foo", options that exist
only with "debug-foo" and options that exist only with "foo", and make
them into combinable attributes that holds common cflags, extra cflags
for debuggin and extra cflags for non-debugging configurations.
The next step is to make it possible to have template configurations.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Configure would load the glob "Configurations*". The problem with
this is that it also loads all kinds of backups of those
configurations that some editors do, like emacs' classic
'Configurations~'. The solution is to give them an extension, such as
'.conf', and make sure to end the glob with that.
Also, because 'Configurations.conf' makes for a silly name, and
because a possibly large number of configurations will become clutter,
move them to a subdirectory 'Configurations/', and rename them to
something more expressive, as well as something that sets up some form
of sorting order. Thus:
Configurations -> Configurations/10-main.conf
Configurations.team -> Configurations/90-team.conf
Finally, make sure that Configure sorts the list of files that 'glob'
produces, and adapt Makefile.org.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Move the build configuration table into separate files. The Configurations
file is standard configs, and Configurations.team is for openssl-team
members. Any other file, Configurations*, found in the same directory
as the Configure script, is loaded.
To add another file, use --config=FILE flags (which should probably be
an absolute path).
Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz
<rsalz@openssl.org>, contributed by Akamai Technologies.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The previous defaulting to TERMIOS took away -DTERMIOS / -DTERMIO a
bit too enthusiastically. Windows/DOSish platforms of all sorts get
identified as OPENSSL_SYS_MSDOS, and they get a different treatment
altogether UNLESS -DTERMIO or -DTERMIOS is explicitely given with the
configuration. The answer is to restore those macro definitions for
the affected configuration targets.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
The rationale for this move is that TERMIOS is default, supported by
POSIX-1.2001, and most definitely on Linux. For a few other systems,
TERMIO may still be the termnial interface of preference, so we keep
-DTERMIO on those in Configure.
crypto/ui/ui_openssl.c is simplified in this regard, and will define
TERMIOS for all systems except a select few exceptions.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
In master OPENSSL_NO_DEPRECATED is the default anyway. By including it in
--strict-warnings as well this means you cannot combine enable-deprecated
with --strict-warnings.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Remove fips_algvs.c
Remove unused fips module build code from Configure and Makefile.org
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Rich Salz
Don't debug.
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Fix typos in ios64-cross config line.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Change OPENSSL_SYSNAME_CYGWIN32 to OPENSSL_SYSNAME_CYGWIN.
Drop outdated Cygwin targets.
RT#3605
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This commit removes NCR, Tandem, Cray.
Regenerates TABLE.
Removes another missing BEOS fluff.
The last platform remaining on this ticket is WIN16.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This change documents the world as-is, by turning all warnings on,
and then turning warnings that trigger off again.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This facilitates "universal" builds, ones that target multiple
architectures, e.g. ARMv5 through ARMv7. See commentary in
Configure for details.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
This commit removes DG-UX.
It also flushes out some left-behinds in config.
And regenerates TABLE from Configure (hadn't been done in awhile).
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This commit removes Sinix/ReliantUNIX RM400
(And a missed piece of BEOS fluff)
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This commit removes SunOS (a sentimental favorite of mine).
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
with OPENSSL_NO_DEPRECATED defined
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Also introduce OPENSSL_USE_DEPRECATED. If OPENSSL_NO_DEPRECATED is
defined at config stage then OPENSSL_USE_DEPRECATED has no effect -
deprecated functions are not available.
If OPENSSL_NO_DEPRECATED is not defined at config stage then
applications must define OPENSSL_USE_DEPRECATED in order to access
deprecated functions.
Also introduce compiler warnings for gcc for applications using
deprecated functions
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
This commit removes Sony NEWS4
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
The only support for SSLv2 left is receiving a SSLv2 compatible client hello.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
When no-ssl3 is set only make SSLv3 disabled by default. Retain -ssl3
options for s_client/s_server/ssltest.
When no-ssl3-method is set SSLv3_*method() is removed and all -ssl3
options.
We should document this somewhere, e.g. wiki, FAQ or manual page.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
These are based on debug-ben-debug-64-clang and is intended to produce
consistent settings for folks involved in the unit testing effort detailed at:
http://wiki.openssl.org/index.php/Unit_Testing
-fsanitize has been removed from the set of clang flags for now. Apparently
clang 3.1, which ships with FreeBSD 9.1, completely ignores -fsanitize. Clang
3.3, which ships with FreeBSD 9.2, compiles with it, but fails to link due to
the absence of libasan:
http://lists.freebsd.org/pipermail/freebsd-hackers/2013-December/043995.html
https://www.mail-archive.com/cfe-commits@cs.uiuc.edu/msg92260.html
http://reviews.llvm.org/D2644
We need -Wno-error=unused-const-variable because of this error:
.../crypto/ec/ec_lib.c:74:19: error: unused variable 'EC_version' [-Werror,-Wunused-const-variable]
static const char EC_version[] = "EC" OPENSSL_VERSION_PTEXT;
Change-Id: I2cba53537137186114c083049ea1233550a741f9
Signed-off-by: Mike Bland <mbland@acm.org>
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Steve Marquess <marquess@openssl.org>
|
|
Also add comment to Configure reminding people to do that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
The following #ifdef tests were all removed:
__MWERKS__
MAC_OS_pre_X
MAC_OS_GUSI_SOURCE
MAC_OS_pre_X
OPENSSL_SYS_MACINTOSH_CLASSIC
OPENSSL_SYS_MACOSX_RHAPSODY
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
RT: 3149
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Add the wrapper to all public header files (Configure
generates one). Don't bother for those that are just
lists of #define's that do renaming.
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
If subcommand fails, just die.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
|
|
|
|
Don't call internal functions directly call them through
SSL_test_functions(). This also makes unit testing work on
Windows and platforms that don't export internal functions
from shared libraries.
By default unit testing is not enabled: it requires the compile
time option "enable-unit-test".
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
|
|
[and split ppccap.c to ppccap.c and ppc_arch.h]
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
This reverts commit 14aaf883d93fb2e321ef1fe25f687fb7b62ef8fe.
|
|
|
