| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
These tests take a very long time on some platforms, and arent't
always strictly necessary. This makes it possible to turn them
off. The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Note: some shells do not like the command verb to be quoted, so we avoid
it unless it's actually necessary.
RT#4665
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Build file templates would be looked up like this if the user gave us
an additional directory to look for configuration files and build file
templates:
$OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
$SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
$OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
$SOURCEDIR/Configurations/Makefile.tmpl
So for example, if the user created his own Makefile.tmpl and tried to
use it with a unixly config, it would never be user because we have a
unix-Makefile.tmpl in our Configurations directory. This is clearly
wrong, and this change makes it look in this order instead:
$OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
$OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
$SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
$SOURCEDIR/Configurations/Makefile.tmpl
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
We've done away with Makefile as source of information and now use
configdata.pm exclusively.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Make sure the information is kept for reconfiguration too.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The definition of STITCHED_CALL relies on OPENSSL_NO_ASM. However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented. Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.
For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
@disablables is sorted, but these were just added at the end of
%disabled in commits c2e27310 and 22e3dcb7.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
PROGRAM_NO_INST, ENGINES_NO_INST, SCRIPTS_NO_INST and LIBS_NO_INST are
to be used to specify program, engines, scripts and libraries that are
not to be installed in the system. Fuzzers, test programs, that sort
of things are of the _NO_INST type, for example.
For the benefit of build file templates and other templates that use
data from configdata.pm, a new hash table $unified_info{install} is
created. It contains a set of subhashes, one for each type of
installable, each having an array of file names as values. For
example, it can look like this:
"install" =>
{
"engines" =>
[
"engines/afalg/afalg",
"engines/capi",
"engines/dasync",
"engines/padlock",
],
"libraries" =>
[
"libcrypto",
"libssl",
],
"programs" =>
[
"apps/openssl",
],
"scripts" =>
[
"apps/CA.pl",
"apps/tsget",
"tools/c_rehash",
],
},
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Instead of having fuzz/build.info.fuzz magically and conditionally
included along with the other build.info files, incorporate it in
fuzz/build.info and add the conditions there instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Make it possible to have a separate and different perl command string
for installable scripts than we use when building, with the
environment variable HASHBANGPERL. Its value default to the same as
the environment PERL if it's defined, otherwise '/usr/bin/env perl'.
Note: this is only relevant for Unix-like environments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
|
|
INCLUDE statements in build.info files were source tree centric. That
meant that to get include directory specs in the build tree, we had to
resort to perl fragments that specified the build tree include paths
as absolute ones.
This change has the INCLUDE statement consider both the source and
build tree for any include directory. It means that there may be some
extra unnecessary include paths, but it also makes life simpler for
anyone who makes changes in the build.info files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1245)
|
|
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1241)
|
|
mkdef.pl was failing to understand no-ripemd. This is a deprecated option
which should act as an alias for no-rmd160.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
This turns these headers into build file generated ones.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
'DEPEND[]=file.h' becomes a special way to say that 'file.h' must be
generated before anything else is built. It's likely that a number
of source files depend on these header files, this provides a simple
way to make sure they are always generated even it the dependency data
hasn't been added to the build file yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
Reviewed-by: Ben Laurie <ben@links.org>
MR: #2740
|
|
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
|
|
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
RT#4486
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
At earlier point 'which' was replaced with IPC::Cmd::can_run call.
Unfortunately on RPM-based systems it is a separate package and it's
not given that it's installed. Resurrected 'which' provides
poor-man fallback for IPC::Cmd::can_run.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
As it was until now, crypto-mdebug-backtrace was enabled by default
and only disabled if crypto-mdebug was disabled.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
For parsing build.info files.
RT#4492
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Add Configure generated header files to $unified_info{generate}. This
makes sure the build files will pick them up with the rest for the
GENERATED macro, and thereby make sure they get cleaned away by 'make
clean'
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
The buf-freelists option was removed in master. There may be some
things that try to disable it, so don't error out.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
RT#2558
Reviewed-by: Tim Hudson <tjh@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
Use the environment variable OPENSSL_LOCAL_CONFIG_DIR to find build
file templates as well.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
The environment variable OPENSSL_LOCAL_CONFIG_DIR is used to indicate
that there's a local directory with extra configuration files.
Reviewed-by: Stephen Henson <steve@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/952)
|
|
It was added as part of 2df84dd3299ff25fa078ca7ffbdeaac65b361feb
but has never actually been used for anything; presumably it was
a typo for one of SCTP or CT.
This removes the last '??' entry from INSTALL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
In the case of generating a file like this:
GENERATE[foo.S]=mkfoo.pl arg1 arg2
the 'mkfoo.pl' generator itself might need to include other files,
such as perl modules within our source tree. We can reuse already
existing syntax for it, like this:
INCLUDE[mkfoo.pl]=module/path
or:
DEPEND[mkfoo.pl]=modules/mymodule.pm
This change implements the support for such constructs, and for the
DEPEND statement, for any value that indicates a perl module (.pm
file), it will automatically infer an INCLUDE statement for its
directory, just like it does for C header files, so you won't have do
write this:
DEPEND[mkfoo.pl]=modules/mymodule.pm
INCLUDE[mkfoo.pl]=modules
Reviewed-by: Emilia Käsper <emilia@openssl.org>
|
|
The reason to warn is that configuration *may* pick up on
configuration header files that are in the source tree, that might be
for a wildly different configuration than what is expected in the
current out-of-source configuration.
Reviewed-by: Matt Caswell <matt@openssl.org>
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
|
e_os.h was defining OPENSSL_NO_DGRAM if OPENSSL_NO_SOCK was defined.
This causes link problems on Windows because the generated .def files
still contain the DGRAM symbols even though they have not been compiled.
Reviewed-by: Rich Salz <rsalz@openssl.org>
|
