Age | Commit message (Collapse) | Author |
|
Use it in the automated workflows.
Fixes: #15247
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15248)
|
|
It's only useful for the FIPS lab and shouldn't be in production.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15092)
|
|
A pair of the disabled string checks were incorrect.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/15082)
|
|
Building the fips provider in addition to the default provider
effectively doubles the build time. Since many users will not
need fips support, it is now disabled by default.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13684)
|
|
Previously, we had dependency making pretty much hard coded in the
build file templates, with a bit of an exception for Unix family
platforms, where we had different cases depending on what dependency
making program was found.
With the Embarcadero C++ builder, a separate scheme appeared, with a
different logic.
This change merges the two, and introduces two config target
attributes:
makedepcmd The program to use, where this is relevant.
This replaces the earlier configuration
attribute 'makedepprog'.
makedep_scheme This is a keyword that can be used by build
files templates to produce different sorts of
commands, but most importantly, to pass as
argument to util/add-depend.pl, which uses
this keyword as a "producer" for the
dependency lines.
If the config target doesn't define the 'makedep_scheme' attribute,
Configure tries to figure it out by looking for GCC compatible
compilers or for the 'makedepend' command.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/15006)
|
|
With this option, the openssl command line tool is not created. Without that
it is impossible to create the fipsmodule.cnf file that the tests would
otherwise depend upon.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14979)
|
|
We just detect this at compile time instead.
This avoids cross-compilation problems where the host platform supports
128-bit ints, but the target platform does not (or vice versa). This was
causing a problem on some platforms where, dependent on the CFLAGS, 128 bit
ints were either supported or not.
Fixes #14804
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14941)
|
|
The Clang-based `bcc32c.exe` doesn't implement the `-Hp` option, so we
have to use [`cpp32.exe`][1] instead. Therefore, change the dependency-
emitting command to use `$(CPP)` instead of `$(CC)`, which which also
uncovered the [existing bug of `2>&1` before `> $dep`][2]. Also
C++Builder's `make.exe` doesn't implement `2>&1` in its command runner,
so wrap the whole line in a `cmd /C`.
[1]: http://docwiki.embarcadero.com/RADStudio/Sydney/en/CPP32.EXE,_the_C_Compiler_Preprocessor
[2]: https://ss64.com/nt/syntax-redirection.html
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/13540)
|
|
Add a config variable "use_int128" to indicate if 128-bit integers are
supported or not at the configure time. This makes it easier to
automatically select 64-bit versus 32-bit implementation for curve448.
Signed-off-by: Amitay Isaacs <amitay@ozlabs.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14784)
|
|
Fixes: #14629
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14634)
|
|
All files that are given to DEPEND statements in build.info files are
being checked against GENERATE statements, to see if it's reasonable
to look for them in the source tree or not. This was only done for .h
files, for reasons that are lost in history. We now change that check
to look at all files instead.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14598)
|
|
Our goal is to be able to produce fipsmodule.cnf with the help of
'openssl fipsinstall', using the openssl program that we build.
This refactors the generatesrc code in all the build file templates to
replace $generator and $generator_incs with $gen0, $gen_args and $gen_incs,
which makes it easier and more consistent to manipulate different bits
of the generator command, and also keeps the variable names consistent
while not overly long.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14320)
|
|
We need to add something for the 'tests' target to depend on, so a
special syntax for those is introduced:
DEPEND[|tests|]=fipsmodule.cnf
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14320)
|
|
The OTC decided that all low level APIs should be deprecated. This extends
to SRP, even though at the current time there is no "EVP" interface to it.
This could be added in a future release.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14132)
|
|
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14126)
|
|
Even if EC and DH are disabled then we may still be able to use TLSv1.3
if we have groups that have been plugged in by an external provider.
Fixes #13767
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
|
|
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13999)
|
|
This sort of duplication is permitted, as the end result will be a single
item anyway, but we might as well warn to avoid future confusion.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13824)
|
|
The faults aren't fatal (i.e. perl just shrugs), but are curious.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13824)
|
|
If the given sources are GENERATEd, we check those generators as well.
This ensures that the declarations in the diverse build.info files are
consistent with existing files.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13824)
|
|
The configuration option 'no-rsa' was dropped with OpenSSL 1.1.0, so
this is simply a cleanup of the remains.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13700)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13706)
|
|
no-ec no-ktls no-siv
This works nicely by addin a new no-bulk option to Configure.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13110)
|
|
If we specify no-engine then this should cascade to also mean
no-dynamic-engine. The store test was only checking whether
dynamic-engine was disabled, meaning that some tests were failing
in a no-engine build.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13502)
|
|
Some very basic config targets don't defined the 'shared_target'
attribute at all. This wasn't handled well enough in Configure.
This also cleans away an explicit reference to the ossltest engine in
Configurations/unix-Makefile.tmpl, which isn't necessary since the
build.info attributes were added.
Fixes openssl/web#197
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13031)
|
|
This makes a difference for './Configure HASH' and './Configure TABLE'
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12933)
|
|
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12745)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12226)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12398)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12109)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12109)
|
|
This line wasn't properly handled:
SCRIPTS{misc,linkname=tsget}=tsget.pl
It generated an attribute "linkname=tsget" with the value 1, instead of
what it should have, an attribute "linkname" with the value "tsget".
Fixes #12341
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12344)
|
|
'absolutedir' does a thorough job ensuring that we have a "real" path
to both source and build directory, unencumbered by symbolic links.
However, that isn't enough on case insensitive file systems on Unix
flavored platforms, where it's possible to stand in, for example,
/PATH/TO/Work/openssl, and then do this:
perl ../../work/openssl/Configure
... and thereby having it look like the source directory and the build
directory aren't the same.
We solve this by having a closer look at the computed source and build
directories, and making sure they are exactly the same strings if they
are in fact the same directory.
This is especially important when making symbolic links based on this
directories, but may have other ramifications as well.
Fixes #12323
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12337)
|
|
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
|
|
'config' is now a mere wrapper for backward compatibility.
All documentation is changed accordingly.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11230)
|
|
These options were coded in util/perl/OpenSSL/config.pm, but that got
removed when the OpenSSL::config::main() function was removed. We're
not putting them back, but in 'Configure'.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11230)
|
|
map_guess() is now table driven, just like get_system().
Additionally, it now takes a config hash table and returns one of its
own. This way, 'Configure' can pass whatever it has already found to
OpenSSL::config::get_platform(), and easily merge the returned hash
table into its %config.
This also gets rid of variables that we no longer need. That includes
$PERL and all the $__CNF_ environment variables.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11230)
|
|
Previously, ./config would check if "$target-$CC", then "$target"
exists and choose the one that does. This is now moved to Configure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11230)
|
|
For FIPS validation purposes - Automated Cryptographic Validation Protocol (ACVP) tests need to be
performed. (See https://github.com/usnistgov/ACVP). These tests are very similiar to the old CAVS tests.
This PR uses a hardwired subset of these test vectors to perform similiar operations,
to show the usage and prove that the API's are able to perform the required operations.
It may also help with communication with the lab (i.e- The lab could add a test here to show
a unworking use case - which we can then address).
The EVP layer performs these tests instead of calling lower level API's
as was done in the old FOM.
Some of these tests require access to internals that are not normally allowed/required.
The config option 'acvp_tests' (enabled by default) has been added so that this
access may be removed.
The mechanism has been implemented as additional OSSL_PARAM values that can be set and get.
A callback mechanism did not seem to add any additional benefit.
These params will not be added to the gettables lists.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11572)
|
|
./config --with-rand-seed=egd
need to defines OPENSSL_RAND_SEED_EGD and OPENSSL_NO_EGD
so get rid of OPENSSL_NO_EGD (compiles but I did not really test EGD)
./config --with-rand-seed=devrandom
does not work since wait_random_seeded works under the assumption
that OPENSSL_RAND_SEED_GETRANDOM is supposed to be enabled as well,
that is usually the case, but not when only devrandom is enabled.
Skip the wait code in this special case.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11848)
|
|
It seems that in older perl versions '(?P' doesn't interact very well
with '(?|' or '(?:'.
Since we make extensive use of '(?P' in build.info parsing, we avoid
combining that with '(?|' and '(?:' when parsing build.info variables,
and end up parsing variable modifier twice (first generally, and then
parse that result into the modifier components).
Fixes #11694
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11737)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11657)
|
|
Fixes #11618
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11624)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11616)
|
|
For GOST2012-GOST8912-GOST8912 IANA introduce TLS Supported Groups Identifiers
https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-8
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11568)
|
|
The 'config' script checked for a bunch of crypto/ sub-system
directories, and added 'no-' options if they weren't there.
We move it to 'Configure' in an effort to simplify 'config' for
further work.
Note: this is pretty much a historical thing. In modern OpenSSL, it's
much simpler to edit the SUBDIRS statement in crypto/build.info.
However, it's been claimed the there are those who still remove some
of these sub-system sources.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11217)
|
|
There were some remaining old code and comments that don't serve a
purpose any longer.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11185)
|
|
Use case: having a variable with multiple source files in its value,
and wanting to refer to the corresponding object file.
$SRCS=foo.c bar.c
SOURCE[program]=$SRCS
DEPEND[${SRCS/.c/.o}]=prog.h
GENERATE[prog.h]=...
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11185)
|
|
So far, the "index" part of KEYWORD[whatever] could only handle one
item. There are cases, however, where we want to add the exact same
value to multiple items. This is especially helpful if a variable
that may have multi-item values are used in the "index" part.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11185)
|