| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Mark J. Cox <mark@awe.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11526)
|
|
This commit updates Configurations/README.md and turns the Makefile
templates into non-links.
The motivation for this is that not all template exist in the directory
leading to 404 Not found errors when accessed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12401)
|
|
Fixes #12350
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12373)
|
|
Documentation files were treated as programs when assigning to the
make variables HTMLDOCS{1,3,5,7} and MANDOCS{1,3,5,7}, which is is
incorrect on POSIX sub-systems where executables have an extension
(.exe).
Fixes #11937
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12374)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12109)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12109)
|
|
The shared_target attrribute for Solaris built with gcc wasn't right
and shared libraries couldn't be properly built.
Fixes #12356
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12360)
|
|
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
|
|
Some configuration targets pretend to be for a specific compiler, but
are more widely usable, and should reflect that.
[work in progress]
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11230)
|
|
BASE_unix sets ex_libs to `-lz` based the on zlib linking.
AIX platforms overwrote this instead of adding to it.
CLA: Trivial
Signed-off-by: Attila Szakacs <attila.szakacs@oneidentity.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12271)
|
|
The binder of the AIX linker needs to be told which functions to call on
loading and initializing a shared object. Therefore another configuration
variable shared_fipsflag is introduced, which is appended to shared_defflag
when the providers/fips module gets configured.
It was suggested to refactor the line in the build file template to become
more generic and less magic. There is, however, currently no suggestion how
to actually achive this, so we leave a TODO comment.
The possible shared_fipsflag must only be appended to the shared_def iff
this code is acting on behalf of the fips provider module build.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11950)
|
|
BSD-generic32 already uses this for building shared libraries on other
32-bit BSD platforms. Commit b7efa56 collapsed various *BSD targets
down to the BSD-generic ones and BSD-x86. At the time only
OpenBSD/i386 used `bsd-shared` while both FreeBSD and NetBSD used
`bsd-gcc-shared`. In practice, all of the BSDs are using either a
GCC/ld.bfd toolchain or a clang/lld toolchain both of which are
compatible with 'bsd-gcc-shared'.
Retire 'bsd-shared' since this removes the last user.
Fixes #12050.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/12110)
|
|
Also fix a nit in recent CHANGES.md update.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11770)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11839)
|
|
This is a 32-bit ABI build (as opposed to linux64-mips64).
Setting SIXTY_FOUR_BIT breaks hardware optimizations, at least on
octeon processors.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11725)
|
|
flag (which is not supported by older compilers).
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11815)
|
|
With MANSUFFIX=A the statement '$$fn$(MANSUFFIX)' is reaplaces with
'$fnA' and left empty because the `fnA' variables is not recognized
within the shell.
With {} around fn it is then bocomes ${fn}A and works as expected.
While here, add the MANSUFFIX to the ECHO line so it is properly printed
during build.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11643)
|
|
PROCESSSOR => PROCESSOR
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11654)
|
|
Fixes #11623
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11629)
|
|
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
|
|
The fips.so and legacy.so providers were not being installed because of
a typo in the makefile templates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11615)
|
|
We only installed engines, now we also install other modules.
Fixes #11559
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11566)
|
|
The erroneously introduced names grasshopper-* replaced with
kuznyechik-* according to official algorithm name translation.
Too long symbolic names replaced with human-enterable ones.
Also the mechanism of deprecating names in objects.txt is implemented
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11440)
|
|
libssl code uses EVP_PKEY_get0_EC_KEY() to extract certain basic data
from the EC_KEY. We replace that with internal EVP_PKEY functions.
This may or may not be refactored later on.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11358)
|
|
The Windows command line has its limits, and we're hitting it hard.
We therefore generate one 'del' command for each explicit file for the
'clean' target.
Fixes #11163
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11171)
|
|
This target gave '-pie' as a C flag when it should be a linker flag.
Additionally, we add '-fPIE' as C flag for binaries.
Fixes #11237
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11238)
|
|
According to forum discussions with NDK developers, ANDROID_NDK_HOME
is used for something else.
Fixes #11205
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11206)
|
|
util/progs.pl depends on the build tree (on configdata.pm,
specifically), so it needs to be run from the build tree. But why
stop there? We might as well generate apps/progs.c and apps/progs.h
when building.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11185)
|
|
Since we've now switched to use util/wrap.pl to wrap uninstalled
programs everywhere, there's no need to set the environment variables
OPENSSL_ENGINES and OPENSSL_MODULES globally for the tests.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11110)
|
|
Remove unused util/process_docs.pl
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10856)
|
|
We had all tests run with test/test-runs/ as working directory, and
tests cleaned up after themselves... which is well and good, until
you want to have a look at what went wrong when a complex test fails,
and you have to recreate everything it does manually.
To remedy this, we have OpenSSL::Test create the result directory
dynamically (and cleaning it up first if it's already there) and let
the test recipe have that as working directory.
Test recipes are now encouraged to name their diverse output files
uniquely, and not to clean them up, to allow a developer to have a
look at the files that were produced.
With continuous integration that allows this, the result directories
could also be archived and be left as a build artifact.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11080)
|
|
Because we generate an increasing number of POD files, some of them
end up in the build tree. This makes it difficult for find-doc-nits
to work as desired when the build tree is separate from the source
tree.
The best supported way to make it work in such an environment is to
run it from the build tree and let it use the build information from
configdata.pm to find all the POD files. To make this smooth enough,
we add a function 'files' that returns an array of file names
corresponding to criteria from the caller.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11045)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11054)
|
|
Fixes #10998
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11000)
|
|
Add cmd-nits make target.
Listing options should stop when it hits the "parameters" separator.
Add missing .pod.in files to doc/man1/build.info
Tweak find-doc-nits to try openssl-XXX before XXX for POD files and
change an error messavge to be more useful.
Fix the following pages: ca, cms, crl, dgst, enc,
engine, errstr, gendsa, genrsa, list, ocsp, passwd, pkcs7, pkcs12, rand,
rehash, req, rsautil, s_server, speed, s_time,
sess_id, smime, srp, ts, x509.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10873)
|
|
Replace "=for openssl foreign manuals" with simpler syntax, it looks
like the "=for openssl ifdef" construct.
Fix some broken L<> links; add some missing foreign references and fixed
some typo's.
The WARNINGS in dhparam referred to non-existant commands so reword it.
Fixes #10109
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10256)
|
|
When generating html or manpages from POD files, we used $< or $? to
get the file name to process. It turns out, though, that some make
implementations only define $< with implicit rules, so its expansion
remains empty in explicit rules. $? is a fine replacement, but only
as long as we have one dependency, so it may cause problems in the
future.
The final solution seems to be to use explicit POD file names
instead. That leaves no doubts.
Fixes #10817
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/10849)
|
|
The nmake rule contains actually two errors:
1. The $< target[1] does not work for regular rules and is
expanded to an empty string after issuing the warning
NMAKE : warning U4006: special macro undefined : '$<"'
Solution: replace $< by $?
2. The substitution regex is not quoted correctly, which leads
to the following error message by cmd.exe:
'href' is not recognized as an internal or external command,
operable program or batch file.
Solution: Quoting arguments for cmd.exe is really a nightmare,
but with the help of the excellent description [2] I was able to
properly quote the regex. Things were complicated by the fact that
a lot of levels of unquoting needed to be considered:
* perl (windows-makefile.tmpl -> makefile)
* make (reading the makefile)
* cmd.exe (executed by make)
* perl (scanning command line using CommandLineToArgvW())
The fix works, but the regex has become unmaintainable. It would actually
be better to wrap the entire command (including the regex) into a little
perl script which can be called by make directly.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/filename-macros
[2] https://blogs.msdn.microsoft.com/twistylittlepassagesallalike/2011/04/23/everyone-quotes-command-line-arguments-the-wrong-way/
Fixes #10648
Fixes #10749
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10719)
|
|
For some reason, we didn't use some of the possible target attributes
in the Unix Makefile template, and there was a similar but much
smaller lack of use in the Windows makefile template as well.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10753)
|
|
Remove them using "del", not "rmdir"
Fixes #10553
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10555)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10586)
|
|
Fixes #8322
The leak-checking (and backtrace option, on some platforms) provided
by crypto-mdebug and crypto-mdebug-backtrace have been mostly neutered;
only the "make malloc fail" capability remains. OpenSSL recommends using
the compiler's leak-detection instead.
The OPENSSL_DEBUG_MEMORY environment variable is no longer used.
CRYPTO_mem_ctrl(), CRYPTO_set_mem_debug(), CRYPTO_mem_leaks(),
CRYPTO_mem_leaks_fp() and CRYPTO_mem_leaks_cb() return a failure code.
CRYPTO_mem_debug_{malloc,realloc,free}() have been removed. All of the
above are now deprecated.
Merge (now really small) mem_dbg.c into mem.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10572)
|
|
Reported-by: misspell-fixer <https://github.com/vlajos/misspell-fixer>
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10544)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6236)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6236)
|
|
The solaris config targets assumed that GNU cc used Sun ld at all
times. However, there are setups where GNU ld is used instead, so we
adapt the Solaris gcc config targets to use the mechanism introduced
with Configurations/shared_info.pl to try to detect what ld flavor is
being used and set the diverse ld flags accordingly.
Fixes #8547
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8548)
|
|
We also add this to our x86_64 builds on appveyor
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10287)
|
|
The `./pyca-cryptography/.travis/downstream.d` subdirectory that causes the `rm` command to fail (albeit harmlessly, but with a warning from `make` nonetheless).
>rm -f `find . -name '*.d' \! -name '.*' -print`
>rm: cannot remove './pyca-cryptography/.travis/downstream.d': Is a directory
>make: [Makefile:1910: clean] Error 1 (ignored)
Exclude directories from being matched by the `find` commands.
CLA: trivial
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10264)
|
|
We were not consistently using one or the other, and the perlasm
code assumes dashes, which MSVC tolerates.
Fixes #10075
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10222)
|
|
Fixes #8961
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8990)
|
