Age | Commit message (Collapse) | Author |
|
The explicit enable-asan build fails in the memleak test for unknown
reasons. Therefore we disable it temporarily to get a green Travis.
Other builds that use -fsanitize=address in Travis seem to pass.
[extended tests]
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10689)
|
|
The pyca-cryptography external test has been failing for a long time.
It looks like upstream needs to make some changes to adapt to 3.0.
[extended tests]
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10689)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/10639)
|
|
1, Remove simple test just with --strict-warnings enabled.
2, Share the three common envs with amd64.
3, Add matrix item running test in bionic(default xenial) for arm64.
4, Enable MSan test on arm64 for extended test.
5, Enable UBSan test on arm64 for extended test.
Change-Id: Ic1f2c5e39ee6fbafed6ede74a925301121463520
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10519)
|
|
Reported-by: misspell-fixer <https://github.com/vlajos/misspell-fixer>
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10544)
|
|
The leak sanitizer gives better reports (complete stack traces) and
works as a wrapper around the application instead of relying on
cooperative enabling and disabling calls (which are too easy to get
unbalanced).
Related to #8322
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9294)
|
|
Ungraceful 'exit' probably causes unexpeced error on background activity.
So replace 'exit' with recommended 'travis_terminate'. Also see
https://travis-ci.community/t/exit-0-cannot-exit-successfully-on-arm/5731/4
Change-Id: I382bd93a3e15ecdf305bab23fc4adefbf0348ffb
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/10561)
|
|
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10446)
|
|
Use new doc-build capabilities
Add -i flag to dofile.
Add doc/man1 to SUBDIRS for the new templated doc files
Rewrite commit a397aca (merged from PR 10118) to use the doc-template stuff.
Put template references in common place
Template options and text come at the end of command-specific options:
opt_x, opt_trust, opt_r (in that order).
Refactor xchain options.
Do doc-nits after building generated sources.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10159)
|
|
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10232)
|
|
Change-Id: I5d2b729699cfd8e80c3df17db4a9d2edcbf64454
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10046)
|
|
This allows for shorter logs, and also logs that only show the details
for tests that fail.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9862)
|
|
Now that we use travis_terminate, we can make the status messages
simpler to find, and we don't need the "OK" output.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9707)
|
|
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9620)
|
|
[extended tests]
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9450)
|
|
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8411)
|
|
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8370)
|
|
For C, -ansi is equivalent to -std=c90
For C++, -ansi is equivalent to -std=c++98
We also place -ansi in CPPFLAGS instead of the usual command line config,
to avoid getting it when linking (clang complains)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8325)
|
|
CLA: trivial
In Travis CI, add a Python linting step that runs flake8 tests in Travis CI
to find syntax errors and undefined names. (http://flake8.pycqa.org)
__E901,E999,F821,F822,F823__ are the "_showstopper_" flake8 issues that can halt
the runtime with a SyntaxError, NameError, etc. Most other flake8 issues are
merely "style violations" -- useful for readability but they do not effect
runtime safety.
* F821: undefined name `name`
* F822: undefined name `name` in `__all__`
* F823: local variable name referenced before assignment
* E901: SyntaxError or IndentationError
* E999: SyntaxError -- failed to compile a file into an Abstract Syntax Tree
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7410)
|
|
IBM POWER Open Source Ecosystem division asserts commitment to providing
more reliable service. GH#7016.
This reverts commit 275bfc56a6c4efa7e80c8cbb11fda0c3f9be818d.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|
|
The logs are usually not looked at, and when they are it's almost
always after they've completed and returned a status. That being
the case, "progress" output is useless if it's always seen after
the fact.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6928)
|
|
Build jobs keep timing out initializing...
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)
|
|
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6461)
|
|
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6360)
|
|
'install' depends on 'install_docs', so making the latter explicit is
a waste.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6250)
|
|
One is clang --strict-warnings and one gcc sanitizer extended test.
Sanitizer build is quite expensive, can take >30 mins and is commented
for occasions when there is reason to believe that PPC-specific problem
can be diagnosed with sanitizer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6192)
|
|
Linking fails with "unrecognized option '--push-state--no-as-needed'",
which is beyond our control.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6185)
|
|
Apparently trusty image has newer clang, there is no need to pull
clang-3.9 packages. It's clang-5.0.0, installation is a bit quirky,
as it fails to compile for example strcmp(s,"-") without warning,
and complains about unreferred -I flags. But it's argued that benefits
of exercising newer sanitizer outweights the inconvenience of
additional -D__NO_STRING_INLINE and -Wno-unused-command-line-argument.
Also pull golang when actually needed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6185)
|
|
Default osx image runs Mac OS X 10.12, which apparently suffers from
infrequent socket failures affecting some tests. Later image runs
10.13...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5986)
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5930)
|
|
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5776)
|
|
Travis-ci log output is huge and overflows internal travis-ci view,
which makes it hard to find errors.
Redirect some output to a file and dump it only if it fails.
Remove "v" option from tar that builds and extracts the srcdist.
While running the tests manually, some non-POSIX (bashisms) with ==
vs = came to light.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5555)
|
|
Recent changes seem to have gotten OS X back on track, so we should be
able to run our tests there again.
This reverts commit e12e903e9ac675d08f9dd0db1f0c1a2049232c21.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5292)
|
|
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5266)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5185)
|
|
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4950)
|
|
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4652)
|
|
Fixes #4444
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4447)
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3842)
|
|
Something environmental changed in travis so that it started preferring
the ubuntu clang-3.9 version instead of the llvm.org one. This breaks the
sanitiser based builds. This change forces travis to de-prioritise the
ubuntu clang packages.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3759)
|
|
If it did, it really is something that should be checked in, and should
therefore make a CI build fail.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3686)
|
|
One particular build was running out of memory. By swapping to debug mode
we reduce the optimisation level which should reduce the amount of memory
required.
[extended tests]
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3601)
|
|
This reverts commit e2580e70d5c644c5dadd33ffa8bb23223959b87a.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Updates https://github.com/openssl/openssl/pull/3268)
|
|
Modify one of the integration builds so that that the
OPENSSL_SMALL_MEMORY option is compiled. There doesn't appear to be an
automatic build with this option set.
I think the options in the modified build are covered elsewhere (without
the small memory) but a new job might still be preferable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3268)
|
|
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3393)
|
|
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2022)
|
|
The check for this was done by checking if $TRAVIS_EVENT_TYPE is
"pull_request". The trouble is that when new data is pushed to an
already existing pull request, the event type is "push".
Better then to go with another documented variable, $TRAVIS_PULL_REQUEST,
which is "false" in non-PR builds.
Ref: https://docs.travis-ci.com/user/environment-variables/#Default-Environment-Variables
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3205)
|
|
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3046)
|
|
Some of the external tests do not run well with 'no-shared'
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3007)
|