diff options
Diffstat (limited to 'crypto/aes')
-rw-r--r-- | crypto/aes/asm/bsaes-x86_64.pl | 1184 |
1 files changed, 1184 insertions, 0 deletions
diff --git a/crypto/aes/asm/bsaes-x86_64.pl b/crypto/aes/asm/bsaes-x86_64.pl new file mode 100644 index 0000000000..7593ecdb91 --- /dev/null +++ b/crypto/aes/asm/bsaes-x86_64.pl @@ -0,0 +1,1184 @@ +#!/usr/bin/env perl + +################################################################### +### AES-128 [originally in CTR mode] ### +### bitsliced implementation for Intel Core 2 processors ### +### requires support of SSE extensions up to SSSE3 ### +### Author: Emilia Käsper ### +### Date: 2009-03-19 ### +### Public domain ### +### ### +### See http://homes.esat.kuleuven.be/~ekasper/#software for ### +### further information. ### +################################################################### +# +# September 2011. +# +# Started as transliteration to "perlasm" the original code has +# undergone following changes: +# +# - code was made position-independent; +# - rounds were folded into a loop resulting in >5x size reduction +# from 12.5KB to 2.2KB; +# - above was possibile thanks to mixcolumns() modification that +# allowed to feed its output back to aesenc[last], this was +# achieved at cost of two additional inter-registers moves; +# - some instruction reordering and interleaving; +# - this module doesn't implement key setup subroutine, instead it +# relies on conversion of "conventional" key schedule as returned +# by AES_set_encrypt_key (see discussion below); +# - first and last round keys are treated differently, which allowed +# to skip one shiftrows(), reduce bit-sliced key schedule and +# speed-up conversion by 22%; +# - support for 192- and 256-bit keys was added; +# +# Resulting performance in CPU cycles spent to encrypt one byte out +# of 4096-byte buffer with 128-bit key is: +# +# Emilia's this(*) difference +# +# Core 2 9.30 8.69 +7% +# Nehalem(**) 7.63 6.98 +9% +# Atom 17.1 17.4 -2%(***) +# +# (*) Comparison is not completely fair, because "this" is ECB, +# i.e. no extra processing such as counter values calculation +# and xor-ing input as in Emilia's CTR implementation is +# performed. However, the CTR calculations stand for not more +# than 1% of total time, so comparison is *rather* fair. +# +# (**) Results were collected on Westmere, which is considered to +# be equivalent to Nehalem for this code. +# +# (***) Slowdown on Atom is rather strange per se, because original +# implementation has a number of 9+-bytes instructions, which +# are bad for Atom front-end, and which I eliminated completely. +# In attempt to address deterioration sbox() was tested in FP +# SIMD "domain" (movaps instead of movdqa, xorps instead of +# pxor, etc.). While it resulted in nominal 4% improvement on +# Atom, it hurted Westmere by more than 2x factor. +# +# As for key schedule conversion subroutine. Interface to OpenSSL +# relies on per-invocation on-the-fly conversion. This naturally +# has impact on performance, especially for short inputs. Conversion +# time in CPU cycles and its ratio to CPU cycles spent in 8x block +# function is: +# +# conversion conversion/8x block +# Core 2 410 0.37 +# Nehalem 310 0.35 +# Atom 570 0.26 +# +# The ratio values mean that 128-byte blocks will be processed +# 21-27% slower, 256-byte blocks - 12-16%, 382-byte blocks - 8-11%, +# etc. Then keep in mind that input sizes not divisible by 128 are +# *effectively* slower, especially shortest ones, e.g. consecutive +# 144-byte blocks are processed 44% slower than one would expect, +# 272 - 29%, 400 - 22%, etc. Yet, despite all these "shortcomings" +# it's still faster than ["hyper-threading-safe" code path in] +# aes-x86_64.pl on all lengths above 64 bytes... +# +# <appro@openssl.org> + +$flavour = shift; +$output = shift; +if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } + +$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/); + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or +( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or +die "can't locate x86_64-xlate.pl"; + +open STDOUT,"| $^X $xlate $flavour $output"; + +my ($inp,$out,$len,$key,$ivp)=("%rdi","%rsi","%rdx","%rcx"); +my @XMM=map("%xmm$_",(15,0..14)); # best on Atom, +10% over (0..15) + +{ +my ($key,$rounds,$const)=("%rax","%r10d","%r11"); + +sub sbox { +# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb +# output in lsb > [b0, b1, b4, b6, b3, b7, b2, b5] < msb +my @b=@_[0..7]; +my @t=@_[8..11]; +my @s=@_[12..15]; + &InBasisChange (@b); + &Inv_GF256 (@b[6,5,0,3,7,1,4,2],@t,@s); + &OutBasisChange (@b[7,1,4,2,6,5,0,3]); +} + +sub InBasisChange { +# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb +# output in lsb > [b6, b5, b0, b3, b7, b1, b4, b2] < msb +my @b=@_[0..7]; +$code.=<<___; + pxor @b[6], @b[5] + pxor @b[1], @b[2] + pxor @b[0], @b[5] + pxor @b[2], @b[6] + pxor @b[0], @b[3] + + pxor @b[3], @b[6] + pxor @b[7], @b[3] + pxor @b[5], @b[7] + pxor @b[4], @b[3] + pxor @b[5], @b[4] + pxor @b[1], @b[3] + + pxor @b[7], @b[2] + pxor @b[5], @b[1] +___ +} + +sub OutBasisChange { +# input in lsb > [b0, b1, b2, b3, b4, b5, b6, b7] < msb +# output in lsb > [b6, b1, b2, b4, b7, b0, b3, b5] < msb +my @b=@_[0..7]; +$code.=<<___; + pxor @b[6], @b[0] + pxor @b[4], @b[1] + pxor @b[0], @b[2] + pxor @b[6], @b[4] + pxor @b[1], @b[6] + + pxor @b[5], @b[1] + pxor @b[3], @b[5] + pxor @b[7], @b[3] + pxor @b[5], @b[7] + pxor @b[5], @b[2] + + pxor @b[7], @b[4] +___ +} + +sub Mul_GF4 { +#;************************************************************* +#;* Mul_GF4: Input x0-x1,y0-y1 Output x0-x1 Temp t0 (8) * +#;************************************************************* +my ($x0,$x1,$y0,$y1,$t0)=@_; +$code.=<<___; + movdqa $y0, $t0 + pxor $y1, $t0 + pand $x0, $t0 + pxor $x1, $x0 + pand $y0, $x1 + pand $y1, $x0 + pxor $x1, $x0 + pxor $t0, $x1 +___ +} + +sub Mul_GF4_N { # not used, see next subroutine +# multiply and scale by N +my ($x0,$x1,$y0,$y1,$t0)=@_; +$code.=<<___; + movdqa $y0, $t0 + pxor $y1, $t0 + pand $x0, $t0 + pxor $x1, $x0 + pand $y0, $x1 + pand $y1, $x0 + pxor $x0, $x1 + pxor $t0, $x0 +___ +} + +sub Mul_GF4_N_GF4 { +# interleaved Mul_GF4_N and Mul_GF4 +my ($x0,$x1,$y0,$y1,$t0, + $x2,$x3,$y2,$y3,$t1)=@_; +$code.=<<___; + movdqa $y0, $t0 + movdqa $y2, $t1 + pxor $y1, $t0 + pxor $y3, $t1 + pand $x0, $t0 + pand $x2, $t1 + pxor $x1, $x0 + pxor $x3, $x2 + pand $y0, $x1 + pand $y2, $x3 + pand $y1, $x0 + pand $y3, $x2 + pxor $x0, $x1 + pxor $x3, $x2 + pxor $t0, $x0 + pxor $t1, $x3 +___ +} +sub Mul_GF16_2 { +my @x=@_[0..7]; +my @y=@_[8..11]; +my @t=@_[12..15]; +$code.=<<___; + movdqa @x[0], @t[0] + movdqa @x[1], @t[1] +___ + &Mul_GF4 (@x[0], @x[1], @y[0], @y[1], @t[2]); +$code.=<<___; + pxor @x[2], @t[0] + pxor @x[3], @t[1] + pxor @y[2], @y[0] + pxor @y[3], @y[1] +___ + Mul_GF4_N_GF4 (@t[0], @t[1], @y[0], @y[1], @t[3], + @x[2], @x[3], @y[2], @y[3], @t[2]); +$code.=<<___; + pxor @t[0], @x[0] + pxor @t[0], @x[2] + pxor @t[1], @x[1] + pxor @t[1], @x[3] + + movdqa @x[4], @t[0] + movdqa @x[5], @t[1] + pxor @x[6], @t[0] + pxor @x[7], @t[1] +___ + &Mul_GF4_N_GF4 (@t[0], @t[1], @y[0], @y[1], @t[3], + @x[6], @x[7], @y[2], @y[3], @t[2]); +$code.=<<___; + pxor @y[2], @y[0] + pxor @y[3], @y[1] +___ + &Mul_GF4 (@x[4], @x[5], @y[0], @y[1], @t[3]); +$code.=<<___; + pxor @t[0], @x[4] + pxor @t[0], @x[6] + pxor @t[1], @x[5] + pxor @t[1], @x[7] +___ +} +sub Inv_GF256 { +#;******************************************************************** +#;* Inv_GF256: Input x0-x7 Output x0-x7 Temp t0-t3,s0-s3 (144) * +#;******************************************************************** +my @x=@_[0..7]; +my @t=@_[8..11]; +my @s=@_[12..15]; +# direct optimizations from hardware +$code.=<<___; + movdqa @x[4], @t[3] + movdqa @x[5], @t[2] + movdqa @x[1], @t[1] + movdqa @x[7], @s[1] + movdqa @x[0], @s[0] + + pxor @x[6], @t[3] + pxor @x[7], @t[2] + pxor @x[3], @t[1] + movdqa @t[3], @s[2] + pxor @x[6], @s[1] + movdqa @t[2], @t[0] + pxor @x[2], @s[0] + movdqa @t[3], @s[3] + + por @t[1], @t[2] + por @s[0], @t[3] + pxor @t[0], @s[3] + pand @s[0], @s[2] + pxor @t[1], @s[0] + pand @t[1], @t[0] + pand @s[0], @s[3] + movdqa @x[3], @s[0] + pxor @x[2], @s[0] + pand @s[0], @s[1] + pxor @s[1], @t[3] + pxor @s[1], @t[2] + movdqa @x[4], @s[1] + movdqa @x[1], @s[0] + pxor @x[5], @s[1] + pxor @x[0], @s[0] + movdqa @s[1], @t[1] + pand @s[0], @s[1] + por @s[0], @t[1] + pxor @s[1], @t[0] + pxor @s[3], @t[3] + pxor @s[2], @t[2] + pxor @s[3], @t[1] + movdqa @x[7], @s[0] + pxor @s[2], @t[0] + movdqa @x[6], @s[1] + pxor @s[2], @t[1] + movdqa @x[5], @s[2] + pand @x[3], @s[0] + movdqa @x[4], @s[3] + pand @x[2], @s[1] + pand @x[1], @s[2] + por @x[0], @s[3] + pxor @s[0], @t[3] + pxor @s[1], @t[2] + pxor @s[2], @t[1] + pxor @s[3], @t[0] + + #Inv_GF16 \t0, \t1, \t2, \t3, \s0, \s1, \s2, \s3 + + # new smaller inversion + + movdqa @t[3], @s[0] + pand @t[1], @t[3] + pxor @t[2], @s[0] + + movdqa @t[0], @s[2] + movdqa @s[0], @s[3] + pxor @t[3], @s[2] + pand @s[2], @s[3] + + movdqa @t[1], @s[1] + pxor @t[2], @s[3] + pxor @t[0], @s[1] + + pxor @t[2], @t[3] + + pand @t[3], @s[1] + + movdqa @s[2], @t[2] + pxor @t[0], @s[1] + + pxor @s[1], @t[2] + pxor @s[1], @t[1] + + pand @t[0], @t[2] + + pxor @t[2], @s[2] + pxor @t[2], @t[1] + + pand @s[3], @s[2] + + pxor @s[0], @s[2] +___ +# output in s3, s2, s1, t1 + +# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \t2, \t3, \t0, \t1, \s0, \s1, \s2, \s3 + +# Mul_GF16_2 \x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3 + &Mul_GF16_2(@x,@s[3,2,1],@t[1],@s[0],@t[0,2,3]); + +### output msb > [x3,x2,x1,x0,x7,x6,x5,x4] < lsb +} + +# AES linear components + +sub shiftrows { +my @x=@_[0..7]; +my $mask=pop; +$code.=<<___; + pxor 0x00($key),@x[0] + pxor 0x10($key),@x[1] + pshufb $mask,@x[0] + pxor 0x20($key),@x[2] + pshufb $mask,@x[1] + pxor 0x30($key),@x[3] + pshufb $mask,@x[2] + pxor 0x40($key),@x[4] + pshufb $mask,@x[3] + pxor 0x50($key),@x[5] + pshufb $mask,@x[4] + pxor 0x60($key),@x[6] + pshufb $mask,@x[5] + pxor 0x70($key),@x[7] + pshufb $mask,@x[6] + lea 0x80($key),$key + pshufb $mask,@x[7] +___ +} + +sub mixcolumns { +# modified to emit output in order suitable for feeding back to aesenc[last] +my @x=@_[0..7]; +my @t=@_[8..15]; +$code.=<<___; + pshufd \$0x93, @x[0], @t[0] # x0 <<< 32 + pshufd \$0x93, @x[1], @t[1] + pxor @t[0], @x[0] # x0 ^ (x0 <<< 32) + pshufd \$0x93, @x[2], @t[2] + pxor @t[1], @x[1] + pshufd \$0x93, @x[3], @t[3] + pxor @t[2], @x[2] + pshufd \$0x93, @x[4], @t[4] + pxor @t[3], @x[3] + pshufd \$0x93, @x[5], @t[5] + pxor @t[4], @x[4] + pshufd \$0x93, @x[6], @t[6] + pxor @t[5], @x[5] + pshufd \$0x93, @x[7], @t[7] + pxor @t[6], @x[6] + pxor @t[7], @x[7] + + pxor @x[0], @t[1] + pxor @x[7], @t[0] + pxor @x[7], @t[1] + pshufd \$0x4E, @x[0], @x[0] # (x0 ^ (x0 <<< 32)) <<< 64) + pxor @x[1], @t[2] + pshufd \$0x4E, @x[1], @x[1] + pxor @x[4], @t[5] + pxor @t[0], @x[0] + pxor @x[5], @t[6] + pxor @t[1], @x[1] + pxor @x[3], @t[4] + pshufd \$0x4E, @x[4], @t[0] + pxor @x[6], @t[7] + pshufd \$0x4E, @x[5], @t[1] + pxor @x[2], @t[3] + pshufd \$0x4E, @x[3], @x[4] + pxor @x[7], @t[3] + pshufd \$0x4E, @x[7], @x[5] + pxor @x[7], @t[4] + pshufd \$0x4E, @x[6], @x[3] + pxor @t[4], @t[0] + pshufd \$0x4E, @x[2], @x[6] + pxor @t[5], @t[1] + + pxor @t[3], @x[4] + pxor @t[7], @x[5] + pxor @t[6], @x[3] + movdqa @t[0], @x[2] + pxor @t[2], @x[6] + movdqa @t[1], @x[7] +___ +} + +sub aesenc { # not used +my @b=@_[0..7]; +my @t=@_[8..15]; +$code.=<<___; + movdqa 0x30($const),@t[0] # .LSR +___ + &shiftrows (@b,@t[0]); + &sbox (@b,@t); + &mixcolumns (@b[0,1,4,6,3,7,2,5],@t); +} + +sub aesenclast { # not used +my @b=@_[0..7]; +my @t=@_[8..15]; +$code.=<<___; + movdqa 0x40($const),@t[0] # .LSRM0 +___ + &shiftrows (@b,@t[0]); + &sbox (@b,@t); +$code.=<<___ + pxor 0x00($key),@b[0] + pxor 0x10($key),@b[1] + pxor 0x20($key),@b[4] + pxor 0x30($key),@b[6] + pxor 0x40($key),@b[3] + pxor 0x50($key),@b[7] + pxor 0x60($key),@b[2] + pxor 0x70($key),@b[5] +___ +} + +sub swapmove { +my ($a,$b,$n,$mask,$t)=@_; +$code.=<<___; + movdqa $b,$t + psrlq \$$n,$b + pxor $a,$b + pand $mask,$b + pxor $b,$a + psllq \$$n,$b + pxor $t,$b +___ +} +sub swapmove2x { +my ($a0,$b0,$a1,$b1,$n,$mask,$t0,$t1)=@_; +$code.=<<___; + movdqa $b0,$t0 + psrlq \$$n,$b0 + movdqa $b1,$t1 + psrlq \$$n,$b1 + pxor $a0,$b0 + pxor $a1,$b1 + pand $mask,$b0 + pand $mask,$b1 + pxor $b0,$a0 + psllq \$$n,$b0 + pxor $b1,$a1 + psllq \$$n,$b1 + pxor $t0,$b0 + pxor $t1,$b1 +___ +} + +sub bitslice { +my @x=reverse(@_[0..7]); +my ($t0,$t1,$t2,$t3)=@_[8..11]; +$code.=<<___; + movdqa 0x00($const),$t0 # .LBS0 + movdqa 0x10($const),$t1 # .LBS1 +___ + &swapmove2x(@x[0,1,2,3],1,$t0,$t2,$t3); + &swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3); +$code.=<<___; + movdqa 0x20($const),$t0 # .LBS2 +___ + &swapmove2x(@x[0,2,1,3],2,$t1,$t2,$t3); + &swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3); + + &swapmove2x(@x[0,4,1,5],4,$t0,$t2,$t3); + &swapmove2x(@x[2,6,3,7],4,$t0,$t2,$t3); +} + +$code.=<<___; +.text + +.extern AES_encrypt + +.type _bsaes_encrypt8,\@abi-omnipotent +.align 64 +_bsaes_encrypt8: + lea .LBS0(%rip), $const # constants table + + movdqa ($key), @XMM[9] # round 0 key + lea 0x10($key), $key + movdqa 0x60($const), @XMM[8] # .LM0SR + pxor @XMM[9], @XMM[0] # xor with round0 key + pxor @XMM[9], @XMM[1] + pshufb @XMM[8], @XMM[0] + pxor @XMM[9], @XMM[2] + pshufb @XMM[8], @XMM[1] + pxor @XMM[9], @XMM[3] + pshufb @XMM[8], @XMM[2] + pxor @XMM[9], @XMM[4] + pshufb @XMM[8], @XMM[3] + pxor @XMM[9], @XMM[5] + pshufb @XMM[8], @XMM[4] + pxor @XMM[9], @XMM[6] + pshufb @XMM[8], @XMM[5] + pxor @XMM[9], @XMM[7] + pshufb @XMM[8], @XMM[6] + pshufb @XMM[8], @XMM[7] +_bsaes_encrypt8_bitslice: +___ + &bitslice (@XMM[0..7, 8..11]); +$code.=<<___; + dec $rounds + jmp .Lenc_sbox +.align 16 +.Lenc_loop: +___ + &shiftrows (@XMM[0..7, 8]); +$code.=".Lenc_sbox:\n"; + &sbox (@XMM[0..7, 8..15]); +$code.=<<___; + dec $rounds + jl .Lenc_done +___ + &mixcolumns (@XMM[0,1,4,6,3,7,2,5, 8..15]); +$code.=<<___; + movdqa 0x30($const), @XMM[8] # .LSR + jnz .Lenc_loop + movdqa 0x40($const), @XMM[8] # .LSRM0 + jmp .Lenc_loop +.align 16 +.Lenc_done: +___ + # output in lsb > [t0, t1, t4, t6, t3, t7, t2, t5] < msb + &bitslice (@XMM[0,1,4,6,3,7,2,5, 8..11]); +$code.=<<___; + movdqa ($key), @XMM[8] # last round key + pxor @XMM[8], @XMM[0] + pxor @XMM[8], @XMM[1] + pxor @XMM[8], @XMM[4] + pxor @XMM[8], @XMM[6] + pxor @XMM[8], @XMM[3] + pxor @XMM[8], @XMM[7] + pxor @XMM[8], @XMM[2] + pxor @XMM[8], @XMM[5] + ret +.size _bsaes_encrypt8,.-_bsaes_encrypt8 +___ +} +{ +my ($out,$inp,$rounds,$const)=("%rax","%rcx","%r10d","%r11"); + +sub bitslice_key { +my @x=reverse(@_[0..7]); +my ($bs0,$bs1,$bs2,$t2,$t3)=@_[8..12]; + + &swapmove (@x[0,1],1,$bs0,$t2,$t3); +$code.=<<___; + #&swapmove(@x[2,3],1,$t0,$t2,$t3); + movdqa @x[0], @x[2] + movdqa @x[1], @x[3] +___ + #&swapmove2x(@x[4,5,6,7],1,$t0,$t2,$t3); + + &swapmove2x (@x[0,2,1,3],2,$bs1,$t2,$t3); +$code.=<<___; + #&swapmove2x(@x[4,6,5,7],2,$t1,$t2,$t3); + movdqa @x[0], @x[4] + movdqa @x[2], @x[6] + movdqa @x[1], @x[5] + movdqa @x[3], @x[7] +___ + &swapmove2x (@x[0,4,1,5],4,$bs2,$t2,$t3); + &swapmove2x (@x[2,6,3,7],4,$bs2,$t2,$t3); +} + +$code.=<<___; +.type _bsaes_enc_key_convert,\@abi-omnipotent +.align 16 +_bsaes_enc_key_convert: + lea .LBS1(%rip), $const + movdqu ($inp), %xmm7 # load round 0 key + movdqa -0x10($const), %xmm8 # .LBS0 + movdqa 0x00($const), %xmm9 # .LBS1 + movdqa 0x10($const), %xmm10 # .LBS2 + movdqa 0x40($const), %xmm13 # .LM0 + movdqa 0x60($const),%xmm14 # .LNOT + + movdqu 0x10($inp), %xmm6 # load round 1 key + lea 0x10($inp), $inp + movdqa %xmm7, ($out) # save round 0 key + lea 0x10($out), $out + dec $rounds + jmp .Lkey_loop +.align 16 +.Lkey_loop: + pshufb %xmm13, %xmm6 + movdqa %xmm6, %xmm7 +___ + &bitslice_key (map("%xmm$_",(0..7, 8..12))); +$code.=<<___; + pxor %xmm14, %xmm5 # "pnot" + pxor %xmm14, %xmm6 + pxor %xmm14, %xmm0 + pxor %xmm14, %xmm1 + lea 0x10($inp), $inp + movdqa %xmm0, 0x00($out) # write bit-sliced round key + movdqa %xmm1, 0x10($out) + movdqa %xmm2, 0x20($out) + movdqa %xmm3, 0x30($out) + movdqa %xmm4, 0x40($out) + movdqa %xmm5, 0x50($out) + movdqa %xmm6, 0x60($out) + movdqa %xmm7, 0x70($out) + lea 0x80($out),$out + movdqu ($inp), %xmm6 # load next round key + dec $rounds + jnz .Lkey_loop + + pxor 0x70($const), %xmm6 # .L63 + movdqa %xmm6, ($out) # save last round key + ret +.size _bsaes_enc_key_convert,.-_bsaes_enc_key_convert +___ +} + +if (1) { # following two functions are unsupported interface + # used for benchmarking... +$code.=<<___; +.globl bsaes_enc_key_convert +.type bsaes_enc_key_convert,\@function,2 +.align 16 +bsaes_enc_key_convert: + mov 240($inp),%r10d # pass rounds + mov $inp,%rcx # pass key + mov $out,%rax # pass key schedule + call _bsaes_enc_key_convert + ret +.size bsaes_enc_key_convert,.-bsaes_enc_key_convert + +.globl bsaes_encrypt_128 +.type bsaes_encrypt_128,\@function,4 +.align 16 +bsaes_encrypt_128: +.Lenc128_loop: + movdqu 0x00($inp), @XMM[0] # load input + movdqu 0x10($inp), @XMM[1] + movdqu 0x20($inp), @XMM[2] + movdqu 0x30($inp), @XMM[3] + movdqu 0x40($inp), @XMM[4] + movdqu 0x50($inp), @XMM[5] + movdqu 0x60($inp), @XMM[6] + movdqu 0x70($inp), @XMM[7] + mov $key, %rax # pass the $key + lea 0x80($inp), $inp + mov \$10,%r10d + + call _bsaes_encrypt8 + + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + movdqu @XMM[6], 0x30($out) + movdqu @XMM[3], 0x40($out) + movdqu @XMM[7], 0x50($out) + movdqu @XMM[2], 0x60($out) + movdqu @XMM[5], 0x70($out) + lea 0x80($out), $out + sub \$0x80,$len + ja .Lenc128_loop + ret +.size bsaes_encrypt_128,.-bsaes_encrypt_128 +___ +} +{ +###################################################################### +# +# OpenSSL interface +# +my ($arg1,$arg2,$arg3,$arg4,$arg5) = $win64 ? ("%rcx","%rdx","%r8","%r9","%r10") + : ("%rdi","%rsi","%rdx","%rcx","%r8"); +my ($inp,$out,$len,$key)=("%r12","%r13","%r14","%r15"); + +$code.=<<___; +.globl bsaes_ecb_encrypt_blocks +.type bsaes_ecb_encrypt_blocks,\@abi-omnipotent +.align 16 +bsaes_ecb_encrypt_blocks: + push %rbp + push %rbx + push %r12 + push %r13 + push %r14 + push %r15 + lea -0x48(%rsp),%rsp +___ +$code.=<<___ if ($win64); + lea -0xa0(%rsp), %rsp + movaps %xmm6, 0x40(%rsp) + movaps %xmm7, 0x50(%rsp) + movaps %xmm8, 0x60(%rsp) + movaps %xmm9, 0x70(%rsp) + movaps %xmm10, 0x80(%rsp) + movaps %xmm11, 0x90(%rsp) + movaps %xmm12, 0xa0(%rsp) + movaps %xmm13, 0xb0(%rsp) + movaps %xmm14, 0xc0(%rsp) + movaps %xmm15, 0xd0(%rsp) +.Lecb_enc_body: +___ +$code.=<<___; + mov %rsp,%rbp # backup %rsp + mov 240($arg4),%eax # rounds + mov $arg1,$inp # backup arguments + mov $arg2,$out + mov $arg3,$len + mov $arg4,$key + cmp \$8,$arg3 + jb .Lecb_enc_short + + mov %eax,%ebx # backup rounds + shl \$7,%rax # 128 bytes per inner round key + sub \$`128-32`,%rax # size of bit-sliced key schedule + sub %rax,%rsp + mov %rsp,%rax # pass key schedule + mov $key,%rcx # pass key + mov %ebx,%r10d # pass rounds + call _bsaes_enc_key_convert + + sub \$8,$len +.Lecb_enc_loop: + movdqu 0x00($inp), @XMM[0] # load input + movdqu 0x10($inp), @XMM[1] + movdqu 0x20($inp), @XMM[2] + movdqu 0x30($inp), @XMM[3] + movdqu 0x40($inp), @XMM[4] + movdqu 0x50($inp), @XMM[5] + mov %rsp, %rax # pass key schedule + movdqu 0x60($inp), @XMM[6] + mov %ebx,%r10d # pass rounds + movdqu 0x70($inp), @XMM[7] + lea 0x80($inp), $inp + + call _bsaes_encrypt8 + + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + movdqu @XMM[6], 0x30($out) + movdqu @XMM[3], 0x40($out) + movdqu @XMM[7], 0x50($out) + movdqu @XMM[2], 0x60($out) + movdqu @XMM[5], 0x70($out) + lea 0x80($out), $out + sub \$8,$len + jnc .Lecb_enc_loop + + add \$8,$len + jz .Lecb_enc_done + + movdqu 0x00($inp), @XMM[0] # load input + mov %rsp, %rax # pass key schedule + mov %ebx,%r10d # pass rounds + cmp \$2,$len + jb .Lecb_enc_one + movdqu 0x10($inp), @XMM[1] + je .Lecb_enc_two + movdqu 0x20($inp), @XMM[2] + cmp \$4,$len + jb .Lecb_enc_three + movdqu 0x30($inp), @XMM[3] + je .Lecb_enc_four + movdqu 0x40($inp), @XMM[4] + cmp \$6,$len + jb .Lecb_enc_five + movdqu 0x50($inp), @XMM[5] + je .Lecb_enc_six + movdqu 0x60($inp), @XMM[6] + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + movdqu @XMM[6], 0x30($out) + movdqu @XMM[3], 0x40($out) + movdqu @XMM[7], 0x50($out) + movdqu @XMM[2], 0x60($out) + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_six: + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + movdqu @XMM[6], 0x30($out) + movdqu @XMM[3], 0x40($out) + movdqu @XMM[7], 0x50($out) + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_five: + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + movdqu @XMM[6], 0x30($out) + movdqu @XMM[3], 0x40($out) + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_four: + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + movdqu @XMM[6], 0x30($out) + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_three: + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + movdqu @XMM[4], 0x20($out) + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_two: + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + movdqu @XMM[1], 0x10($out) + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_one: + call _bsaes_encrypt8 + movdqu @XMM[0], 0x00($out) # write output + jmp .Lecb_enc_done +.align 16 +.Lecb_enc_short: + lea ($inp), $arg1 + lea ($out), $arg2 + lea ($key), $arg3 + call AES_encrypt + lea 16($inp), $inp + lea 16($out), $out + dec $len + jnz .Lecb_enc_short + +.Lecb_enc_done: + lea (%rsp),%rax + pxor %xmm0, %xmm0 +.Lecb_enc_bzero: # wipe key schedule [if any] + movdqa %xmm0, 0x00(%rax) + movdqa %xmm0, 0x10(%rax) + lea 0x20(%rax), %rax + cmp %rax, %rbp + jb .Lecb_enc_bzero + + lea (%rbp),%rsp # restore %rsp +___ +$code.=<<___ if ($win64); + movaps 0x40(%rbp), %xmm6 + movaps 0x50(%rbp), %xmm7 + movaps 0x60(%rbp), %xmm8 + movaps 0x70(%rbp), %xmm9 + movaps 0x80(%rbp), %xmm10 + movaps 0x90(%rbp), %xmm11 + movaps 0xa0(%rbp), %xmm12 + movaps 0xb0(%rbp), %xmm13 + movaps 0xc0(%rbp), %xmm14 + movaps 0xd0(%rbp), %xmm15 + lea 0xa0(%rbp), %rsp +___ +$code.=<<___; + mov 0x48(%rsp), %r15 + mov 0x50(%rsp), %r14 + mov 0x58(%rsp), %r13 + mov 0x60(%rsp), %r12 + mov 0x68(%rsp), %rbx + mov 0x70(%rsp), %rbp + lea 0x78(%rsp), %rsp +.Lecb_enc_epilogue: + ret +.size bsaes_ecb_encrypt_blocks,.-bsaes_ecb_encrypt_blocks + +.globl bsaes_ctr32_encrypt_blocks +.type bsaes_ctr32_encrypt_blocks,\@abi-omnipotent +.align 16 +bsaes_ctr32_encrypt_blocks: + push %rbp + push %rbx + push %r12 + push %r13 + push %r14 + push %r15 + lea -0x48(%rsp), %rsp +___ +$code.=<<___ if ($win64); + mov 0xa0(%rsp),$arg5 # pull ivp + lea -0xa0(%rsp), %rsp + movaps %xmm6, 0x40(%rsp) + movaps %xmm7, 0x50(%rsp) + movaps %xmm8, 0x60(%rsp) + movaps %xmm9, 0x70(%rsp) + movaps %xmm10, 0x80(%rsp) + movaps %xmm11, 0x90(%rsp) + movaps %xmm12, 0xa0(%rsp) + movaps %xmm13, 0xb0(%rsp) + movaps %xmm14, 0xc0(%rsp) + movaps %xmm15, 0xd0(%rsp) +.Lctr_enc_body: +___ +$code.=<<___; + mov %rsp, %rbp # backup %rsp + movdqu ($arg5), %xmm0 # load counter + mov 240($arg4), %eax # rounds + mov $arg1, $inp # backup arguments + mov $arg2, $out + mov $arg3, $len + mov $arg4, $key + movdqa %xmm0, 0x20(%rbp) # copy counter + cmp \$8, $arg3 + jb .Lctr_enc_short + + mov %eax, %ebx # rounds + shl \$7, %rax # 128 bytes per inner round key + sub \$`128-32`, %rax # size of bit-sliced key schedule + sub %rax, %rsp + + mov %rsp, %rax # pass key schedule + mov $key, %rcx # pass key + mov %ebx, %r10d # pass rounds + call _bsaes_enc_key_convert + + movdqa (%rsp), @XMM[9] # load round0 key + lea .LADD1(%rip), %r11 + movdqa 0x20(%rbp), @XMM[0] # counter copy + movdqa -0x20(%r11), @XMM[8] # .LSWPUP + pshufb @XMM[8], @XMM[9] # byte swap upper part + pshufb @XMM[8], @XMM[0] + movdqa @XMM[9], (%rsp) # save adjusted round0 key + jmp .Lctr_enc_loop +.align 16 +.Lctr_enc_loop: + movdqa @XMM[0], 0x20(%rbp) # save counter + movdqa @XMM[0], @XMM[1] # prepare 8 counter values + movdqa @XMM[0], @XMM[2] + paddd 0x00(%r11), @XMM[1] # .LADD1 + movdqa @XMM[0], @XMM[3] + paddd 0x10(%r11), @XMM[2] # .LADD2 + movdqa @XMM[0], @XMM[4] + paddd 0x20(%r11), @XMM[3] # .LADD3 + movdqa @XMM[0], @XMM[5] + paddd 0x30(%r11), @XMM[4] # .LADD4 + movdqa @XMM[0], @XMM[6] + paddd 0x40(%r11), @XMM[5] # .LADD5 + movdqa @XMM[0], @XMM[7] + paddd 0x50(%r11), @XMM[6] # .LADD6 + paddd 0x60(%r11), @XMM[7] # .LADD7 + + # Borrow prologue from _bsaes_encrypt8 to use the opportunity + # to flip byte order in 32-bit counter + movdqa (%rsp), @XMM[9] # round 0 key + lea 0x10(%rsp), %rax # pass key schedule + movdqa -0x10(%r11), @XMM[8] # .LSWPUPM0SR + pxor @XMM[9], @XMM[0] # xor with round0 key + pxor @XMM[9], @XMM[1] + pshufb @XMM[8], @XMM[0] + pxor @XMM[9], @XMM[2] + pshufb @XMM[8], @XMM[1] + pxor @XMM[9], @XMM[3] + pshufb @XMM[8], @XMM[2] + pxor @XMM[9], @XMM[4] + pshufb @XMM[8], @XMM[3] + pxor @XMM[9], @XMM[5] + pshufb @XMM[8], @XMM[4] + pxor @XMM[9], @XMM[6] + pshufb @XMM[8], @XMM[5] + pxor @XMM[9], @XMM[7] + pshufb @XMM[8], @XMM[6] + lea .LBS0(%rip), %r11 # constants table + pshufb @XMM[8], @XMM[7] + mov %ebx,%r10d # pass rounds + + call _bsaes_encrypt8_bitslice + + sub \$8,$len + jc .Lctr_enc_loop_done + + movdqu 0x00($inp), @XMM[8] # load input + movdqu 0x10($inp), @XMM[9] + movdqu 0x20($inp), @XMM[10] + movdqu 0x30($inp), @XMM[11] + movdqu 0x40($inp), @XMM[12] + movdqu 0x50($inp), @XMM[13] + movdqu 0x60($inp), @XMM[14] + movdqu 0x70($inp), @XMM[15] + lea 0x80($inp),$inp + pxor @XMM[0], @XMM[8] + movdqa 0x20(%rbp), @XMM[0] # load counter + pxor @XMM[9], @XMM[1] + movdqu @XMM[8], 0x00($out) # write output + pxor @XMM[10], @XMM[4] + movdqu @XMM[1], 0x10($out) + pxor @XMM[11], @XMM[6] + movdqu @XMM[4], 0x20($out) + pxor @XMM[12], @XMM[3] + movdqu @XMM[6], 0x30($out) + pxor @XMM[13], @XMM[7] + movdqu @XMM[3], 0x40($out) + pxor @XMM[14], @XMM[2] + movdqu @XMM[7], 0x50($out) + pxor @XMM[15], @XMM[5] + movdqu @XMM[2], 0x60($out) + lea .LADD1(%rip), %r11 + movdqu @XMM[5], 0x70($out) + lea 0x80($out), $out + paddd 0x70(%r11), @XMM[0] # .LADD8 + jnz .Lctr_enc_loop + + jmp .Lctr_enc_done +.align 16 +.Lctr_enc_loop_done: + movdqu 0x00($inp), @XMM[8] # load input + pxor @XMM[8], @XMM[0] + movdqu @XMM[0], 0x00($out) # write output + cmp \$2,$len + jb .Lctr_enc_done + movdqu 0x10($inp), @XMM[9] + pxor @XMM[9], @XMM[1] + movdqu @XMM[1], 0x10($out) + je .Lctr_enc_done + movdqu 0x20($inp), @XMM[10] + pxor @XMM[10], @XMM[4] + movdqu @XMM[4], 0x20($out) + cmp \$4,$len + jb .Lctr_enc_done + movdqu 0x30($inp), @XMM[11] + pxor @XMM[11], @XMM[6] + movdqu @XMM[6], 0x30($out) + je .Lctr_enc_done + movdqu 0x40($inp), @XMM[12] + pxor @XMM[12], @XMM[3] + movdqu @XMM[3], 0x40($out) + cmp \$6,$len + jb .Lctr_enc_done + movdqu 0x50($inp), @XMM[13] + pxor @XMM[13], @XMM[7] + movdqu @XMM[7], 0x50($out) + je .Lctr_enc_done + movdqu 0x60($inp), @XMM[14] + pxor @XMM[14], @XMM[2] + movdqu @XMM[2], 0x60($out) + jmp .Lctr_enc_done + +.align 16 +.Lctr_enc_short: + lea 0x20(%rbp), $arg1 + lea 0x30(%rbp), $arg2 + lea ($key), $arg3 + call AES_encrypt + movdqu ($inp), @XMM[1] + lea 16($inp), $inp + mov 0x2c(%rbp), %eax # load 32-bit counter + bswap %eax + pxor 0x30(%rbp), @XMM[1] + inc %eax # increment + movdqu @XMM[1], ($out) + bswap %eax + lea 16($out), $out + mov %eax, 0x2c(%rsp) # save 32-bit counter + dec $len + jnz .Lctr_enc_short + +.Lctr_enc_done: + lea (%rsp), %rax + pxor %xmm0, %xmm0 +.Lctr_enc_bzero: # wipe key schedule [if any] + movdqa %xmm0, 0x00(%rax) + movdqa %xmm0, 0x10(%rax) + lea 0x20(%rax), %rax + cmp %rax, %rbp + ja .Lctr_enc_bzero + + lea (%rbp),%rsp # restore %rsp +___ +$code.=<<___ if ($win64); + movaps 0x40(%rbp), %xmm6 + movaps 0x50(%rbp), %xmm7 + movaps 0x60(%rbp), %xmm8 + movaps 0x70(%rbp), %xmm9 + movaps 0x80(%rbp), %xmm10 + movaps 0x90(%rbp), %xmm11 + movaps 0xa0(%rbp), %xmm12 + movaps 0xb0(%rbp), %xmm13 + movaps 0xc0(%rbp), %xmm14 + movaps 0xd0(%rbp), %xmm15 + lea 0xa0(%rbp), %rsp +___ +$code.=<<___; + mov 0x48(%rsp), %r15 + mov 0x50(%rsp), %r14 + mov 0x58(%rsp), %r13 + mov 0x60(%rsp), %r12 + mov 0x68(%rsp), %rbx + mov 0x70(%rsp), %rbp + lea 0x78(%rsp), %rsp +.Lctr_enc_epilogue: + ret +.size bsaes_ctr32_encrypt_blocks,.-bsaes_ctr32_encrypt_blocks +___ +} +$code.=<<___; +.align 64 +.LBS0: .quad 0x5555555555555555, 0x5555555555555555 +.LBS1: .quad 0x3333333333333333, 0x3333333333333333 +.LBS2: .quad 0x0f0f0f0f0f0f0f0f, 0x0f0f0f0f0f0f0f0f +.LSR: .quad 0x0504070600030201, 0x0f0e0d0c0a09080b +.LSRM0: .quad 0x0304090e00050a0f, 0x01060b0c0207080d +.LM0: .quad 0x02060a0e03070b0f, 0x0004080c0105090d +.LM0SR: .quad 0x0a0e02060f03070b, 0x0004080c05090d01 +.LNOT: .quad 0xffffffffffffffff, 0xffffffffffffffff +.L63: .quad 0x6363636363636363, 0x6363636363636363 +.LSWPUP: + .quad 0x0706050403020100, 0x0c0d0e0f0b0a0908 +.LSWPUPM0SR: + .quad 0x0a0d02060c03070b, 0x0004080f05090e01 +.LADD1: .quad 0x0000000000000000, 0x0000000100000000 +.LADD2: .quad 0x0000000000000000, 0x0000000200000000 +.LADD3: .quad 0x0000000000000000, 0x0000000300000000 +.LADD4: .quad 0x0000000000000000, 0x0000000400000000 +.LADD5: .quad 0x0000000000000000, 0x0000000500000000 +.LADD6: .quad 0x0000000000000000, 0x0000000600000000 +.LADD7: .quad 0x0000000000000000, 0x0000000700000000 +.LADD8: .quad 0x0000000000000000, 0x0000000800000000 +.asciz "Bit-sliced AES for x86_64, Emilia Käsper" +.align 64 +___ + +$code =~ s/\`([^\`]*)\`/eval($1)/gem; + +print $code; + +close STDOUT; |