diff options
Diffstat (limited to 'apps/apps.h')
-rw-r--r-- | apps/apps.h | 362 |
1 files changed, 3 insertions, 359 deletions
diff --git a/apps/apps.h b/apps/apps.h index 460188df30..da8eae2d87 100644 --- a/apps/apps.h +++ b/apps/apps.h @@ -29,6 +29,9 @@ # include <openssl/engine.h> # include <openssl/ocsp.h> # include <signal.h> +# include "apps_ui.h" +# include "opt.h" +# include "fmt.h" # if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WINCE) # define openssl_fdset(a,b) FD_SET((unsigned int)a, b) @@ -88,330 +91,6 @@ void corrupt_signature(const ASN1_STRING *signature); int set_cert_times(X509 *x, const char *startdate, const char *enddate, int days); -/* - * Common verification options. - */ -# define OPT_V_ENUM \ - OPT_V__FIRST=2000, \ - OPT_V_POLICY, OPT_V_PURPOSE, OPT_V_VERIFY_NAME, OPT_V_VERIFY_DEPTH, \ - OPT_V_ATTIME, OPT_V_VERIFY_HOSTNAME, OPT_V_VERIFY_EMAIL, \ - OPT_V_VERIFY_IP, OPT_V_IGNORE_CRITICAL, OPT_V_ISSUER_CHECKS, \ - OPT_V_CRL_CHECK, OPT_V_CRL_CHECK_ALL, OPT_V_POLICY_CHECK, \ - OPT_V_EXPLICIT_POLICY, OPT_V_INHIBIT_ANY, OPT_V_INHIBIT_MAP, \ - OPT_V_X509_STRICT, OPT_V_EXTENDED_CRL, OPT_V_USE_DELTAS, \ - OPT_V_POLICY_PRINT, OPT_V_CHECK_SS_SIG, OPT_V_TRUSTED_FIRST, \ - OPT_V_SUITEB_128_ONLY, OPT_V_SUITEB_128, OPT_V_SUITEB_192, \ - OPT_V_PARTIAL_CHAIN, OPT_V_NO_ALT_CHAINS, OPT_V_NO_CHECK_TIME, \ - OPT_V_VERIFY_AUTH_LEVEL, OPT_V_ALLOW_PROXY_CERTS, \ - OPT_V__LAST - -# define OPT_V_OPTIONS \ - { "policy", OPT_V_POLICY, 's', "adds policy to the acceptable policy set"}, \ - { "purpose", OPT_V_PURPOSE, 's', \ - "certificate chain purpose"}, \ - { "verify_name", OPT_V_VERIFY_NAME, 's', "verification policy name"}, \ - { "verify_depth", OPT_V_VERIFY_DEPTH, 'n', \ - "chain depth limit" }, \ - { "auth_level", OPT_V_VERIFY_AUTH_LEVEL, 'n', \ - "chain authentication security level" }, \ - { "attime", OPT_V_ATTIME, 'M', "verification epoch time" }, \ - { "verify_hostname", OPT_V_VERIFY_HOSTNAME, 's', \ - "expected peer hostname" }, \ - { "verify_email", OPT_V_VERIFY_EMAIL, 's', \ - "expected peer email" }, \ - { "verify_ip", OPT_V_VERIFY_IP, 's', \ - "expected peer IP address" }, \ - { "ignore_critical", OPT_V_IGNORE_CRITICAL, '-', \ - "permit unhandled critical extensions"}, \ - { "issuer_checks", OPT_V_ISSUER_CHECKS, '-', "(deprecated)"}, \ - { "crl_check", OPT_V_CRL_CHECK, '-', "check leaf certificate revocation" }, \ - { "crl_check_all", OPT_V_CRL_CHECK_ALL, '-', "check full chain revocation" }, \ - { "policy_check", OPT_V_POLICY_CHECK, '-', "perform rfc5280 policy checks"}, \ - { "explicit_policy", OPT_V_EXPLICIT_POLICY, '-', \ - "set policy variable require-explicit-policy"}, \ - { "inhibit_any", OPT_V_INHIBIT_ANY, '-', \ - "set policy variable inhibit-any-policy"}, \ - { "inhibit_map", OPT_V_INHIBIT_MAP, '-', \ - "set policy variable inhibit-policy-mapping"}, \ - { "x509_strict", OPT_V_X509_STRICT, '-', \ - "disable certificate compatibility work-arounds"}, \ - { "extended_crl", OPT_V_EXTENDED_CRL, '-', \ - "enable extended CRL features"}, \ - { "use_deltas", OPT_V_USE_DELTAS, '-', \ - "use delta CRLs"}, \ - { "policy_print", OPT_V_POLICY_PRINT, '-', \ - "print policy processing diagnostics"}, \ - { "check_ss_sig", OPT_V_CHECK_SS_SIG, '-', \ - "check root CA self-signatures"}, \ - { "trusted_first", OPT_V_TRUSTED_FIRST, '-', \ - "search trust store first (default)" }, \ - { "suiteB_128_only", OPT_V_SUITEB_128_ONLY, '-', "Suite B 128-bit-only mode"}, \ - { "suiteB_128", OPT_V_SUITEB_128, '-', \ - "Suite B 128-bit mode allowing 192-bit algorithms"}, \ - { "suiteB_192", OPT_V_SUITEB_192, '-', "Suite B 192-bit-only mode" }, \ - { "partial_chain", OPT_V_PARTIAL_CHAIN, '-', \ - "accept chains anchored by intermediate trust-store CAs"}, \ - { "no_alt_chains", OPT_V_NO_ALT_CHAINS, '-', "(deprecated)" }, \ - { "no_check_time", OPT_V_NO_CHECK_TIME, '-', "ignore certificate validity time" }, \ - { "allow_proxy_certs", OPT_V_ALLOW_PROXY_CERTS, '-', "allow the use of proxy certificates" } - -# define OPT_V_CASES \ - OPT_V__FIRST: case OPT_V__LAST: break; \ - case OPT_V_POLICY: \ - case OPT_V_PURPOSE: \ - case OPT_V_VERIFY_NAME: \ - case OPT_V_VERIFY_DEPTH: \ - case OPT_V_VERIFY_AUTH_LEVEL: \ - case OPT_V_ATTIME: \ - case OPT_V_VERIFY_HOSTNAME: \ - case OPT_V_VERIFY_EMAIL: \ - case OPT_V_VERIFY_IP: \ - case OPT_V_IGNORE_CRITICAL: \ - case OPT_V_ISSUER_CHECKS: \ - case OPT_V_CRL_CHECK: \ - case OPT_V_CRL_CHECK_ALL: \ - case OPT_V_POLICY_CHECK: \ - case OPT_V_EXPLICIT_POLICY: \ - case OPT_V_INHIBIT_ANY: \ - case OPT_V_INHIBIT_MAP: \ - case OPT_V_X509_STRICT: \ - case OPT_V_EXTENDED_CRL: \ - case OPT_V_USE_DELTAS: \ - case OPT_V_POLICY_PRINT: \ - case OPT_V_CHECK_SS_SIG: \ - case OPT_V_TRUSTED_FIRST: \ - case OPT_V_SUITEB_128_ONLY: \ - case OPT_V_SUITEB_128: \ - case OPT_V_SUITEB_192: \ - case OPT_V_PARTIAL_CHAIN: \ - case OPT_V_NO_ALT_CHAINS: \ - case OPT_V_NO_CHECK_TIME: \ - case OPT_V_ALLOW_PROXY_CERTS - -/* - * Common "extended validation" options. - */ -# define OPT_X_ENUM \ - OPT_X__FIRST=1000, \ - OPT_X_KEY, OPT_X_CERT, OPT_X_CHAIN, OPT_X_CHAIN_BUILD, \ - OPT_X_CERTFORM, OPT_X_KEYFORM, \ - OPT_X__LAST - -# define OPT_X_OPTIONS \ - { "xkey", OPT_X_KEY, '<', "key for Extended certificates"}, \ - { "xcert", OPT_X_CERT, '<', "cert for Extended certificates"}, \ - { "xchain", OPT_X_CHAIN, '<', "chain for Extended certificates"}, \ - { "xchain_build", OPT_X_CHAIN_BUILD, '-', \ - "build certificate chain for the extended certificates"}, \ - { "xcertform", OPT_X_CERTFORM, 'F', \ - "format of Extended certificate (PEM or DER) PEM default " }, \ - { "xkeyform", OPT_X_KEYFORM, 'F', \ - "format of Extended certificate's key (PEM or DER) PEM default"} - -# define OPT_X_CASES \ - OPT_X__FIRST: case OPT_X__LAST: break; \ - case OPT_X_KEY: \ - case OPT_X_CERT: \ - case OPT_X_CHAIN: \ - case OPT_X_CHAIN_BUILD: \ - case OPT_X_CERTFORM: \ - case OPT_X_KEYFORM - -/* - * Common SSL options. - * Any changes here must be coordinated with ../ssl/ssl_conf.c - */ -# define OPT_S_ENUM \ - OPT_S__FIRST=3000, \ - OPT_S_NOSSL3, OPT_S_NOTLS1, OPT_S_NOTLS1_1, OPT_S_NOTLS1_2, \ - OPT_S_NOTLS1_3, OPT_S_BUGS, OPT_S_NO_COMP, OPT_S_NOTICKET, \ - OPT_S_SERVERPREF, OPT_S_LEGACYRENEG, OPT_S_LEGACYCONN, \ - OPT_S_ONRESUMP, OPT_S_NOLEGACYCONN, OPT_S_ALLOW_NO_DHE_KEX, \ - OPT_S_PRIORITIZE_CHACHA, \ - OPT_S_STRICT, OPT_S_SIGALGS, OPT_S_CLIENTSIGALGS, OPT_S_GROUPS, \ - OPT_S_CURVES, OPT_S_NAMEDCURVE, OPT_S_CIPHER, OPT_S_CIPHERSUITES, \ - OPT_S_RECORD_PADDING, OPT_S_DEBUGBROKE, OPT_S_COMP, \ - OPT_S_MINPROTO, OPT_S_MAXPROTO, \ - OPT_S_NO_RENEGOTIATION, OPT_S_NO_MIDDLEBOX, OPT_S__LAST - -# define OPT_S_OPTIONS \ - {"no_ssl3", OPT_S_NOSSL3, '-',"Just disable SSLv3" }, \ - {"no_tls1", OPT_S_NOTLS1, '-', "Just disable TLSv1"}, \ - {"no_tls1_1", OPT_S_NOTLS1_1, '-', "Just disable TLSv1.1" }, \ - {"no_tls1_2", OPT_S_NOTLS1_2, '-', "Just disable TLSv1.2"}, \ - {"no_tls1_3", OPT_S_NOTLS1_3, '-', "Just disable TLSv1.3"}, \ - {"bugs", OPT_S_BUGS, '-', "Turn on SSL bug compatibility"}, \ - {"no_comp", OPT_S_NO_COMP, '-', "Disable SSL/TLS compression (default)" }, \ - {"comp", OPT_S_COMP, '-', "Use SSL/TLS-level compression" }, \ - {"no_ticket", OPT_S_NOTICKET, '-', \ - "Disable use of TLS session tickets"}, \ - {"serverpref", OPT_S_SERVERPREF, '-', "Use server's cipher preferences"}, \ - {"legacy_renegotiation", OPT_S_LEGACYRENEG, '-', \ - "Enable use of legacy renegotiation (dangerous)"}, \ - {"no_renegotiation", OPT_S_NO_RENEGOTIATION, '-', \ - "Disable all renegotiation."}, \ - {"legacy_server_connect", OPT_S_LEGACYCONN, '-', \ - "Allow initial connection to servers that don't support RI"}, \ - {"no_resumption_on_reneg", OPT_S_ONRESUMP, '-', \ - "Disallow session resumption on renegotiation"}, \ - {"no_legacy_server_connect", OPT_S_NOLEGACYCONN, '-', \ - "Disallow initial connection to servers that don't support RI"}, \ - {"allow_no_dhe_kex", OPT_S_ALLOW_NO_DHE_KEX, '-', \ - "In TLSv1.3 allow non-(ec)dhe based key exchange on resumption"}, \ - {"prioritize_chacha", OPT_S_PRIORITIZE_CHACHA, '-', \ - "Prioritize ChaCha ciphers when preferred by clients"}, \ - {"strict", OPT_S_STRICT, '-', \ - "Enforce strict certificate checks as per TLS standard"}, \ - {"sigalgs", OPT_S_SIGALGS, 's', \ - "Signature algorithms to support (colon-separated list)" }, \ - {"client_sigalgs", OPT_S_CLIENTSIGALGS, 's', \ - "Signature algorithms to support for client certificate" \ - " authentication (colon-separated list)" }, \ - {"groups", OPT_S_GROUPS, 's', \ - "Groups to advertise (colon-separated list)" }, \ - {"curves", OPT_S_CURVES, 's', \ - "Groups to advertise (colon-separated list)" }, \ - {"named_curve", OPT_S_NAMEDCURVE, 's', \ - "Elliptic curve used for ECDHE (server-side only)" }, \ - {"cipher", OPT_S_CIPHER, 's', "Specify TLSv1.2 and below cipher list to be used"}, \ - {"ciphersuites", OPT_S_CIPHERSUITES, 's', "Specify TLSv1.3 ciphersuites to be used"}, \ - {"min_protocol", OPT_S_MINPROTO, 's', "Specify the minimum protocol version to be used"}, \ - {"max_protocol", OPT_S_MAXPROTO, 's', "Specify the maximum protocol version to be used"}, \ - {"record_padding", OPT_S_RECORD_PADDING, 's', \ - "Block size to pad TLS 1.3 records to."}, \ - {"debug_broken_protocol", OPT_S_DEBUGBROKE, '-', \ - "Perform all sorts of protocol violations for testing purposes"}, \ - {"no_middlebox", OPT_S_NO_MIDDLEBOX, '-', \ - "Disable TLSv1.3 middlebox compat mode" } - -# define OPT_S_CASES \ - OPT_S__FIRST: case OPT_S__LAST: break; \ - case OPT_S_NOSSL3: \ - case OPT_S_NOTLS1: \ - case OPT_S_NOTLS1_1: \ - case OPT_S_NOTLS1_2: \ - case OPT_S_NOTLS1_3: \ - case OPT_S_BUGS: \ - case OPT_S_NO_COMP: \ - case OPT_S_COMP: \ - case OPT_S_NOTICKET: \ - case OPT_S_SERVERPREF: \ - case OPT_S_LEGACYRENEG: \ - case OPT_S_LEGACYCONN: \ - case OPT_S_ONRESUMP: \ - case OPT_S_NOLEGACYCONN: \ - case OPT_S_ALLOW_NO_DHE_KEX: \ - case OPT_S_PRIORITIZE_CHACHA: \ - case OPT_S_STRICT: \ - case OPT_S_SIGALGS: \ - case OPT_S_CLIENTSIGALGS: \ - case OPT_S_GROUPS: \ - case OPT_S_CURVES: \ - case OPT_S_NAMEDCURVE: \ - case OPT_S_CIPHER: \ - case OPT_S_CIPHERSUITES: \ - case OPT_S_RECORD_PADDING: \ - case OPT_S_NO_RENEGOTIATION: \ - case OPT_S_MINPROTO: \ - case OPT_S_MAXPROTO: \ - case OPT_S_DEBUGBROKE: \ - case OPT_S_NO_MIDDLEBOX - -#define IS_NO_PROT_FLAG(o) \ - (o == OPT_S_NOSSL3 || o == OPT_S_NOTLS1 || o == OPT_S_NOTLS1_1 \ - || o == OPT_S_NOTLS1_2 || o == OPT_S_NOTLS1_3) - -/* - * Random state options. - */ -# define OPT_R_ENUM \ - OPT_R__FIRST=1500, OPT_R_RAND, OPT_R_WRITERAND, OPT_R__LAST - -# define OPT_R_OPTIONS \ - {"rand", OPT_R_RAND, 's', "Load the file(s) into the random number generator"}, \ - {"writerand", OPT_R_WRITERAND, '>', "Write random data to the specified file"} - -# define OPT_R_CASES \ - OPT_R__FIRST: case OPT_R__LAST: break; \ - case OPT_R_RAND: case OPT_R_WRITERAND - -/* - * Option parsing. - */ -extern const char OPT_HELP_STR[]; -extern const char OPT_MORE_STR[]; -typedef struct options_st { - const char *name; - int retval; - /* - * value type: - no value (also the value zero), n number, p positive - * number, u unsigned, l long, s string, < input file, > output file, - * f any format, F der/pem format, E der/pem/engine format identifier. - * l, n and u include zero; p does not. - */ - int valtype; - const char *helpstr; -} OPTIONS; - -/* - * A string/int pairing; widely use for option value lookup, hence the - * name OPT_PAIR. But that name is misleading in s_cb.c, so we also use - * the "generic" name STRINT_PAIR. - */ -typedef struct string_int_pair_st { - const char *name; - int retval; -} OPT_PAIR, STRINT_PAIR; - -/* Flags to pass into opt_format; see FORMAT_xxx, below. */ -# define OPT_FMT_PEMDER (1L << 1) -# define OPT_FMT_PKCS12 (1L << 2) -# define OPT_FMT_SMIME (1L << 3) -# define OPT_FMT_ENGINE (1L << 4) -# define OPT_FMT_MSBLOB (1L << 5) -/* (1L << 6) was OPT_FMT_NETSCAPE, but wasn't used */ -# define OPT_FMT_NSS (1L << 7) -# define OPT_FMT_TEXT (1L << 8) -# define OPT_FMT_HTTP (1L << 9) -# define OPT_FMT_PVK (1L << 10) -# define OPT_FMT_PDE (OPT_FMT_PEMDER | OPT_FMT_ENGINE) -# define OPT_FMT_PDS (OPT_FMT_PEMDER | OPT_FMT_SMIME) -# define OPT_FMT_ANY ( \ - OPT_FMT_PEMDER | OPT_FMT_PKCS12 | OPT_FMT_SMIME | \ - OPT_FMT_ENGINE | OPT_FMT_MSBLOB | OPT_FMT_NSS | \ - OPT_FMT_TEXT | OPT_FMT_HTTP | OPT_FMT_PVK) - -char *opt_progname(const char *argv0); -char *opt_getprog(void); -char *opt_init(int ac, char **av, const OPTIONS * o); -int opt_next(void); -int opt_format(const char *s, unsigned long flags, int *result); -int opt_int(const char *arg, int *result); -int opt_ulong(const char *arg, unsigned long *result); -int opt_long(const char *arg, long *result); -#if defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L && \ - defined(INTMAX_MAX) && defined(UINTMAX_MAX) -int opt_imax(const char *arg, intmax_t *result); -int opt_umax(const char *arg, uintmax_t *result); -#else -# define opt_imax opt_long -# define opt_umax opt_ulong -# define intmax_t long -# define uintmax_t unsigned long -#endif -int opt_pair(const char *arg, const OPT_PAIR * pairs, int *result); -int opt_cipher(const char *name, const EVP_CIPHER **cipherp); -int opt_md(const char *name, const EVP_MD **mdp); -char *opt_arg(void); -char *opt_flag(void); -char *opt_unknown(void); -char **opt_rest(void); -int opt_num_rest(void); -int opt_verify(int i, X509_VERIFY_PARAM *vpm); -int opt_rand(int i); -void opt_help(const OPTIONS * list); -int opt_format_error(const char *s, unsigned long flags); - typedef struct args_st { int size; int argc; @@ -430,20 +109,8 @@ char **copy_argv(int *argc, char *argv[]); */ void win32_utf8argv(int *argc, char **argv[]); - -# define PW_MIN_LENGTH 4 -typedef struct pw_cb_data { - const void *password; - const char *prompt_info; -} PW_CB_DATA; - /* We need both wrap and the "real" function because libcrypto uses both. */ int wrap_password_callback(char *buf, int bufsiz, int verify, void *cb_data); -int password_callback(char *buf, int bufsiz, int verify, PW_CB_DATA *cb_data); - -int setup_ui_method(void); -void destroy_ui_method(void); -const UI_METHOD *get_ui_method(void); int chopup_args(ARGS *arg, char *buf); # ifdef HEADER_X509_H @@ -573,29 +240,6 @@ void print_cert_checks(BIO *bio, X509 *x, void store_setup_crl_download(X509_STORE *st); -/* See OPT_FMT_xxx, above. */ -/* On some platforms, it's important to distinguish between text and binary - * files. On some, there might even be specific file formats for different - * contents. The FORMAT_xxx macros are meant to express an intent with the - * file being read or created. - */ -# define B_FORMAT_TEXT 0x8000 -# define FORMAT_UNDEF 0 -# define FORMAT_TEXT (1 | B_FORMAT_TEXT) /* Generic text */ -# define FORMAT_BINARY 2 /* Generic binary */ -# define FORMAT_BASE64 (3 | B_FORMAT_TEXT) /* Base64 */ -# define FORMAT_ASN1 4 /* ASN.1/DER */ -# define FORMAT_PEM (5 | B_FORMAT_TEXT) -# define FORMAT_PKCS12 6 -# define FORMAT_SMIME (7 | B_FORMAT_TEXT) -# define FORMAT_ENGINE 8 /* Not really a file format */ -# define FORMAT_PEMRSA (9 | B_FORMAT_TEXT) /* PEM RSAPubicKey format */ -# define FORMAT_ASN1RSA 10 /* DER RSAPubicKey format */ -# define FORMAT_MSBLOB 11 /* MS Key blob format */ -# define FORMAT_PVK 12 /* MS PVK file format */ -# define FORMAT_HTTP 13 /* Download using HTTP */ -# define FORMAT_NSS 14 /* NSS keylog format */ - # define EXT_COPY_NONE 0 # define EXT_COPY_ADD 1 # define EXT_COPY_ALL 2 |