diff options
Diffstat (limited to 'Configure')
-rwxr-xr-x | Configure | 275 |
1 files changed, 274 insertions, 1 deletions
@@ -256,8 +256,230 @@ my $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT"; # The configuration reader will do what it can to translate everything into # new style config hash tables, including merging $target and debug-$target # if they are similar enough. +# +# The configuration hashes can refer to templates in two different manners: +# +# - as part of the hash, one can have a key called 'base_templates' that +# indicate what other configuration hashes to inherit data from. +# These are resolved recursively. +# +# Example: +# +# "bar" => { +# haha => "haha" +# }, +# "foo" => { +# base_templates => [ "bar" ], +# hoho => "hoho" +# } +# +# The entry for "foo" will become as follows after processing: +# +# "foo" => { +# haha => "haha", +# hoho => "hoho" +# } +# +# Note 1: any entry from the table can be used as a template. +# Note 2: pure templates have the attribute 'template => 1' and cannot +# be used as targets +# +# - as part of any string, one can have a template reference wrapped in +# double braces, and when processing templates, this will be replaced +# with the corresponding string from the template. +# +# Example: +# +# "bar" => { +# haha => "haha" +# }, +# "foo" => { +# haha => "{{bar}} !!!!" +# } +# +# The entry for "foo" will become as follows after processing: +# +# "foo" => { +# haha => "haha !!!!" +# } +# my %table=( + + # All these templates are merely a translation of the corresponding + # variables further up. + # + # Note: as long as someone might use old style configuration strings, + # or we bother supporting that, those variables need to stay + + # Filler used for when there are no asm files. + no_asm_filler => { + template => 1, + cpuid_obj => "", + bn_obj => "", + ec_obj => "", + des_obj => "", + aes_obj => "", + bf_obj => "", + md5_obj => "", + sha1_obj => "", + cast_obj => "", + rc4_obj => "", + rmd160_obj => "", + rc5_obj => "", + wp_obj => "", + cmll_obj => "", + modes_obj => "", + engines_obj => "", + perlasm_scheme => "void" + }, + + x86_asm => { + template => 1, + cpuid_obj => "x86cpuid.o", + bn_obj => "bn-586.o co-586.o x86-mont.o x86-gf2m.o", + ec_obj => "ecp_nistz256.o ecp_nistz256-x86.o", + des_obj => "des-586.o crypt586.o", + aes_obj => "aes-586.o vpaes-x86.o aesni-x86.o", + bf_obj => "bf-586.o", + md5_obj => "md5-586.o", + sha1_obj => "sha1-586.o sha256-586.o sha512-586.o", + cast_obj => "cast-586.o", + rc4_obj => "rc4-586.o", + rmd160_obj => "rmd-586.o", + rc5_obj => "rc5-586.o", + wp_obj => "wp_block.o wp-mmx.o", + cmll_obj => "cmll-x86.o", + modes_obj => "ghash-x86.o", + engines_obj => "e_padlock-x86.o" + }, + x86_elf_asm => { + template => 1, + base_templates => [ "x86_asm" ], + perlasm_scheme => "elf" + }, + + x86_64_asm => { + template => 1, + cpuid_obj => "x86_64cpuid.o", + bn_obj => "x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o", + ec_obj => "ecp_nistz256.o ecp_nistz256-x86_64.o", + aes_obj => "aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o", + md5_obj => "md5-x86_64.o", + sha1_obj => "sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o", + rc4_obj => "rc4-x86_64.o rc4-md5-x86_64.o", + wp_obj => "wp-x86_64.o", + cmll_obj => "cmll-x86_64.o cmll_misc.o", + modes_obj => "ghash-x86_64.o aesni-gcm-x86_64.o", + engines_obj => "e_padlock-x86_64.o" + }, + ia64_asm => { + template => 1, + cpuid_obj => "ia64cpuid.o", + bn_obj => "bn-ia64.o ia64-mont.o", + aes_obj => "aes_core.o aes_cbc.o aes-ia64.o", + md5_obj => "md5-ia64.o", + sha1_obj => "sha1-ia64.o sha256-ia64.o sha512-ia64.o", + rc4_obj => "rc4-ia64.o rc4_skey.o", + modes_obj => "ghash-ia64.o", + perlasm_scheme => "void" + }, + sparcv9_asm => { + template => 1, + cpuid_obj => "sparcv9cap.o sparccpuid.o", + bn_obj => "bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o vis3-mont.o sparct4-mont.o sparcv9-gf2m.o", + des_obj => "des_enc-sparc.o fcrypt_b.o dest4-sparcv9.o", + aes_obj => "aes_core.o aes_cbc.o aes-sparcv9.o aest4-sparcv9.o", + md5_obj => "md5-sparcv9.o", + sha1_obj => "sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o", + cmll_obj => "camellia.o cmll_misc.o cmll_cbc.o cmllt4-sparcv9.o", + modes_obj => "ghash-sparcv9.o", + perlasm_scheme => "void" + }, + sparcv8_asm => { + template => 1, + cpuid_obj => "", + bn_obj => "sparcv8.o", + des_obj => "des_enc-sparc.o fcrypt_b.o", + perlasm_scheme => "void" + }, + alpha_asm => { + template => 1, + cpuid_obj => "alphacpuid.o", + bn_obj => "bn_asm.o alpha-mont.o", + sha1_obj => "sha1-alpha.o", + modes_obj => "ghash-alpha.o", + perlasm_scheme => "void" + }, + mips32_asm => { + template => 1, + bn_obj => "bn-mips.o mips-mont.o", + aes_obj => "aes_cbc.o aes-mips.o", + sha1_obj => "sha1-mips.o sha256-mips.o", + }, + mips64_asm => { + base_templates => [ "mips32_asm" ], + template => 1, + sha1_obj => "{{mips32_asm}} sha512-mips.o", + }, + s390x_asm => { + template => 1, + cpuid_obj => "s390xcap.o s390xcpuid.o", + bn_obj => "bn-s390x.o s390x-mont.o s390x-gf2m.o", + aes_obj => "aes-s390x.o aes-ctr.o aes-xts.o", + sha1_obj => "sha1-s390x.o sha256-s390x.o sha512-s390x.o", + rc4_obj => "rc4-s390x.o", + modes_obj => "ghash-s390x.o", + }, + armv4_asm => { + template => 1, + cpuid_obj => "armcap.o armv4cpuid.o", + bn_obj => "bn_asm.o armv4-mont.o armv4-gf2m.o", + ec_obj => "ecp_nistz256.o ecp_nistz256-armv4.o", + aes_obj => "aes_cbc.o aes-armv4.o bsaes-armv7.o aesv8-armx.o", + sha1_obj => "sha1-armv4-large.o sha256-armv4.o sha512-armv4.o", + modes_obj => "ghash-armv4.o ghashv8-armx.o", + perlasm_scheme => "void" + }, + aarch64_asm => { + template => 1, + cpuid_obj => "armcap.o arm64cpuid.o mem_clr.o", + aes_obj => "aes_core.o aes_cbc.o aesv8-armx.o", + sha1_obj => "sha1-armv8.o sha256-armv8.o sha512-armv8.o", + modes_obj => "ghashv8-armx.o", + }, + parisc11_asm => { + template => 1, + cpuid_obj => "pariscid.o", + bn_obj => "bn_asm.o parisc-mont.o", + aes_obj => "aes_core.o aes_cbc.o aes-parisc.o", + sha1_obj => "sha1-parisc.o sha256-parisc.o sha512-parisc.o", + rc4_obj => "rc4-parisc.o", + modes_obj => "ghash-parisc.o", + perlasm_scheme => "32" + }, + parisc20_asm => { + template => 1, + cpuid_obj => "pariscid.o", + bn_obj => "pa-risc2W.o parisc-mont.o", + aes_obj => "aes_core.o aes_cbc.o aes-parisc.o", + sha1_obj => "sha1-parisc.o sha256-parisc.o sha512-parisc.o", + rc4_obj => "rc4-parisc.o", + modes_obj => "ghash-parisc.o", + perlasm_scheme => "64" + }, + ppc64_asm => { + template => 1, + cpuid_obj => "ppccpuid.o ppccap.o", + bn_obj => "bn-ppc.o ppc-mont.o ppc64-mont.o", + aes_obj => "aes_core.o aes_cbc.o aes-ppc.o vpaes-ppc.o aesp8-ppc.o", + sha1_obj => "sha1-ppc.o sha256-ppc.o sha512-ppc.o sha256p8-ppc.o sha512p8-ppc.o", + modes_obj => "ghashp8-ppc.o", + }, + ppc32_asm => { + base_templates => [ "ppc64_asm" ], + template => 1 + }, ); sub stringtohash { @@ -473,7 +695,55 @@ sub read_config { # Go through all new targets and resolve template references. foreach (keys %targets) { + # Start with resolving the base templates + my @breadcrumbs = (); + while (my @base_templates = + $table{$_}->{base_templates} ? + @{$table{$_}->{base_templates}} : ()) { + my %new_template_data = (); + my %new_base_templates = (); + foreach my $base_template (@base_templates) { + if (grep { $_ eq $base_template } @breadcrumbs) { + die "Base template loop! target backtrace:\n " + ,$base_template,"\n " + ,join("\n ", + map { "[ ".join(", ", @{$_})." ]" } @breadcrumbs) + ,"\n"; + } + + if ($table{$base_template}) { + %new_base_templates = + ( + %new_base_templates, + map { $_ => 1 } @{$table{$base_template}->{base_templates}} + ); + %new_template_data = + ( + %new_template_data, + %{$table{$base_template}} + ); + delete $new_template_data{template}; + } else { + # There are unresolved base templates. That's no good + warn "Target $_ has unresolved base templates. Removing..."; + delete $table{$_}; + goto NEXT; + } + } + + @breadcrumbs = ( [ @base_templates ], @breadcrumbs ); + # Now, we rebuild the target, using the newly fetched template + # data, overlaying that with the target's original data, and + # overlaying the new base template list on top of that + $table{$_} = { + %new_template_data, + %{$table{$_}}, + base_templates => [ keys %new_base_templates ] + } + } + lookup_templates(\%table, $_); + NEXT: } } @@ -885,7 +1155,7 @@ if ($d) { } } -&usage if (!defined($table{$target})); +&usage if (!defined($table{$target}) || $table{$target}->{template}); if ($fips) { @@ -1986,6 +2256,9 @@ sub print_table_entry my $debug_lflags = "debug-lflags"; my $nodebug_lflags = "nodebug-lflags"; + # Don't print the templates + return if $table{$target}->{template}; + if ($type eq "TABLE") { print <<EOF |