diff options
Diffstat (limited to 'Configure')
| -rwxr-xr-x | Configure | 142 |
1 files changed, 101 insertions, 41 deletions
@@ -21,18 +21,22 @@ # This is used on the DEC Alpha where long is 8 bytes # and int is 4 # BN_LLONG use the type 'long long' in crypto/bn/bn.h -# MD2_CHAR use 'char' instead of 'int' for MD2_INT in crypto/md/md2.h -# MD2_LONG use 'long' instead of 'int' for MD2_INT in crypto/md/md2.h +# MD2_CHAR use 'char' instead of 'int' for MD2_INT in crypto/md2/md2.h +# MD2_LONG use 'long' instead of 'int' for MD2_INT in crypto/md2/md2.h # IDEA_SHORT use 'short' instead of 'int' for IDEA_INT in crypto/idea/idea.h # IDEA_LONG use 'long' instead of 'int' for IDEA_INT in crypto/idea/idea.h # RC2_SHORT use 'short' instead of 'int' for RC2_INT in crypto/rc2/rc2.h # RC2_LONG use 'long' instead of 'int' for RC2_INT in crypto/rc2/rc2.h # RC4_CHAR use 'char' instead of 'int' for RC4_INT in crypto/rc4/rc4.h # RC4_LONG use 'long' instead of 'int' for RC4_INT in crypto/rc4/rc4.h -# RC4_INDEX define RC4_INDEX in crypto/rc4/rc4_enc.c. This turns on +# RC4_INDEX define RC4_INDEX in crypto/rc4/rc4_locl.h. This turns on # array lookups instead of pointer use. # BF_PTR use 'pointer arithmatic' for Blowfish (unsafe on Alpha). # BF_PTR2 use a pentium/intel specific version. +# MD5_ASM use some extra md5 assember, +# SHA1_ASM use some extra sha1 assember, must define L_ENDIAN for x86 +# RMD160_ASM use some extra ripemd160 assember, +# BN_ASM use some extra bn assember, $x86_gcc_des="DES_PTR DES_RISC1 DES_UNROLL"; @@ -51,7 +55,13 @@ $tlib="-lnsl -lsocket"; $bits1="THIRTY_TWO_BIT "; $bits2="SIXTY_FOUR_BIT "; -# -DB_ENDIAN slows things down on a sparc +$x86_sol_asm="asm/bn86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o"; +$x86_elf_asm="asm/bn86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o"; +$x86_out_asm="asm/bn86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o"; +$x86_bsdi_asm="asm/bn86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o"; + +# -DB_ENDIAN slows things down on a sparc for md5, but helps sha1. +# So the md5_locl.h file has an undef B_ENDIAN if sun is defined #config-string CC : CFLAGS : LDFLAGS : special header file mods:bn_asm \ # des_asm:bf_asm @@ -63,18 +73,17 @@ $bits2="SIXTY_FOUR_BIT "; # A few of my development configs "purify", "purify gcc:-g -DPURIFY -Wall:-lsocket -lnsl::::", -"debug", "gcc:-DREF_CHECK -DCRYPTO_MDEBUG -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::::", +"debug", "gcc:-DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::::", "dist", "cc:-O -DNOPROTO::::", # Basic configs that should work on any box "gcc", "gcc:-O3::BN_LLONG:::", "cc", "cc:-O -DNOPROTO -DNOCONST:::::", + # My solaris setups -"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN:\ - -lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-sol.o:asm/dx86-sol.o asm/cx86-sol.o:asm/bx86-sol.o", -"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall:\ - -lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", +"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DBN_ASM:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm:", +"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", # DO NOT use /xO[34] on sparc with SC3.0. # It is broken, and will not pass the tests "solaris-sparc-cc","cc:-fast -O -Xa -DB_ENDIAN:\ @@ -116,30 +125,44 @@ $bits2="SIXTY_FOUR_BIT "; "alpha400-cc", "cc:-arch host -tune host -fast -std -O4 -inline speed::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the -# x86-lnx.o file file since it is hand tweaked assembler. -"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnx.o:asm/dx86-elf.o asm/cx86-elf.o:asm/bx86-elf.o", -"debug-linux-elf","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnx.o:asm/dx86-elf.o asm/cx86-elf.o:asm/bx86-elf.o", -"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnxa.o:asm/dx86-out.o asm/cx86-out.o:asm/bx86-out.o", -"NetBSD-sparc", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", -"NetBSD-x86", "gcc:-DTERMIOS -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnxa.o:asm/dx86-out.o asm/cx86-out.o:asm/bx86-out.o", -"FreeBSD", "gcc:-DTERMIOS -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnxa.o:asm/dx86-out.o asm/cx86-out.o:asm/bx86-out.o", -#"bsdi-gcc", "shlicc2:-O3 -ffast-math-m486::RSA_LLONG $x86_gcc_des $x86_gcc_opts:::", -#"bsdi-gcc", "gcc:-O3 -ffast-math -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:asm/x86-bsdi.o:asm/dx86bsdi.o asm/cx86bsdi.o:asm/bx86bsdi.o", -"bsdi-gcc", "gcc:-O3 -ffast-math -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:::", -"nextstep", "cc:-O3 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:::", +# bn86-elf.o file file since it is hand tweaked assembler. +"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -DBN_ASM -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"debug-linux-elf","gcc:-DREF_CHECK -DBN_ASM -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -DBN_ASM -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", +"NetBSD-sparc", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", +"NetBSD-m86", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", +"NetBSD-x86", "gcc:-DTERMIOS -DBN_ASM -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:", +"FreeBSD", "gcc:-DTERMIOS -DBN_ASM -DL_ENDIAN -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", +#"bsdi-gcc", "gcc:-O3 -ffast-math -DBN_ASM -DL_ENDIAN -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:$x86_bsdi_asm", +"nextstep", "cc:-O3 -Wall -DBN_ASM::BN_LLONG $x86_gcc_des $x86_gcc_opts:::", +# NCR MP-RAS UNIX ver 02.03.01 +"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::", # UnixWare 2.0 -"unixware-2.0","cc:-O:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::", -"unixware-2.0-pentium","cc:-O -Kpentium -Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX $x86_des_des::", +"unixware-2.0","cc:-O -DFILIO_H:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::", +"unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX $x86_des_des::", # IBM's AIX. "aix-cc", "cc:-O -DAIX -DB_ENDIAN::BN_LLONG RC4_CHAR:::", "aix-gcc", "gcc:-O2 -DAIX -DB_ENDIAN::BN_LLONG RC4_CHAR:::", +# +# Cray T90 (SDSC) +# It's Big-endian, but the algorithms work properly when B_ENDIAN is NOT +# defined. The T90 ints and longs are 8 bytes long, and apparently the +# B_ENDIAN code assumes 4 byte ints. Fortunately, the non-B_ENDIAN and +# non L_ENDIAN code aligns the bytes in each word correctly. +# +# The BIT_FIELD_LIMITS define is to avoid two fatal compiler errors: +#'Taking the address of a bit field is not allowed. ' +#'An expression with bit field exists as the operand of "sizeof" ' +# (written by Wayne Schroeder <schroede@SDSC.EDU>) +"cray-t90-cc", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::SIXTY_FOUR_BIT_LONG DES_INT:::", + # DGUX, 88100. "dgux-R3-gcc", "gcc:-O3 -fomit-frame-pointer::RC4_INDEX DES_UNROLL:::", "dgux-R4-gcc", "gcc:-O3 -fomit-frame-pointer:-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::", -"dgux-R4-x86-gcc", "gcc:-O3 -fomit-frame-pointer -DL_ENDIAN:-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnx.o:asm/dx86-elf.o asm/cx86-elf.o:asm/bx86-elf.o", +"dgux-R4-x86-gcc", "gcc:-O3 -DBN_ASM -fomit-frame-pointer -DL_ENDIAN:-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", # SCO 5 "sco5-cc", "cc:-O:-lsocket:$x86_gcc_des $x86_gcc_opts:::", # des options? @@ -167,15 +190,21 @@ $Makefile="Makefile.ssl"; $des_locl="crypto/des/des_locl.h"; $des ="crypto/des/des.h"; $bn ="crypto/bn/bn.h"; -$md2 ="crypto/md/md2.h"; +$md2 ="crypto/md2/md2.h"; $rc4 ="crypto/rc4/rc4.h"; -$rc4_enc="crypto/rc4/rc4_enc.c"; +$rc4_locl="crypto/rc4/rc4_locl.h"; $idea ="crypto/idea/idea.h"; $rc2 ="crypto/rc2/rc2.h"; $bf ="crypto/bf/bf_locl.h"; $bn_mulw="bn_mulw.o"; $des_enc="des_enc.o fcrypt_b.o"; $bf_enc ="bf_enc.o"; +$cast_enc="c_enc.o"; +$rc4_enc="rc4_enc.o"; +$rc5_enc="rc5_enc.o"; +$md5_obj=""; +$sha1_obj=""; +$rmd160_obj=""; if ($#ARGV < 0) { @@ -219,14 +248,33 @@ if (!defined($table{$target})) exit(1); } -($cc,$cflags,$lflags,$bn_ops,$bn_obj,$des_obj,$bf_obj)= +($cc,$cflags,$lflags,$bn_ops,$bn_obj,$des_obj,$bf_obj,$md5_obj,$sha1_obj, + $cast_obj,$rc4_obj,$rmd160_obj,$rc5_obj)= split(/\s*:\s*/,$table{$target}); $cflags="$flags$cflags" if ($flags ne ""); $lflags="$libs$lflags"if ($libs ne ""); -$bn_obj=$bn_mulw unless ($bn_obj =~ /\.o$/); -$des_obj=$des_enc unless ($des_obj =~ /\.o$/); -$bf_obj=$bf_enc unless ($bf_obj =~ /\.o$/); +$bn_obj=$bn_mulw unless ($bn_obj =~ /\.o$/); +$des_obj=$des_enc unless ($des_obj =~ /\.o$/); +$bf_obj=$bf_enc unless ($bf_obj =~ /\.o$/); +$cast_obj=$cast_enc unless ($cast_obj =~ /\.o$/); +$rc4_obj=$rc4_enc unless ($rc4_obj =~ /\.o$/); +$rc5_obj=$rc5_enc unless ($rc5_obj =~ /\.o$/); +if ($sha1_obj =~ /\.o$/) + { +# $sha1_obj=$sha1_enc; + $cflags.=" -DSHA1_ASM"; + } +if ($md5_obj =~ /\.o$/) + { +# $md5_obj=$md5_enc; + $cflags.=" -DMD5_ASM"; + } +if ($rmd160_obj =~ /\.o$/) + { +# $rmd160_obj=$rmd160_enc; + $cflags.=" -DRMD160_ASM"; + } $n=&file_new($Makefile); open(IN,"<".$Makefile) || die "unable to read $Makefile:$!\n"; @@ -240,18 +288,30 @@ while (<IN>) s/^BN_MULW=.*$/BN_MULW= $bn_obj/; s/^DES_ENC=.*$/DES_ENC= $des_obj/; s/^BF_ENC=.*$/BF_ENC= $bf_obj/; + s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/; + s/^RC4_ENC=.*$/RC4_ENC= $rc4_obj/; + s/^RC5_ENC=.*$/RC5_ENC= $rc5_obj/; + s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $md5_obj/; + s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $sha1_obj/; + s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/; print OUT $_."\n"; } close(IN); close(OUT); &Rename($Makefile,&file_old($Makefile)); &Rename($n,$Makefile); -print "CC =$cc\n"; -print "CFLAG =$cflags\n"; -print "EX_LIBS=$lflags\n"; -print "BN_MULW=$bn_obj\n"; -print "DES_ENC=$des_obj\n"; -print "BF_ENC =$bf_obj\n"; +print "CC =$cc\n"; +print "CFLAG =$cflags\n"; +print "EX_LIBS =$lflags\n"; +print "BN_MULW =$bn_obj\n"; +print "DES_ENC =$des_obj\n"; +print "BF_ENC =$bf_obj\n"; +print "CAST_ENC =$cast_obj\n"; +print "RC4_ENC =$rc4_obj\n"; +print "RC5_ENC =$rc5_obj\n"; +print "MD5_OBJ_ASM =$md5_obj\n"; +print "SHA1_OBJ_ASM =$sha1_obj\n"; +print "RMD160_OBJ_ASM=$rmd160_obj\n"; $des_ptr=0; $des_risc1=0; @@ -287,8 +347,8 @@ foreach (sort split(/\s+/,$bn_ops)) $rc2_int=3 if /RC2_LONG/; $bf_ptr=1 if $_ eq "BF_PTR"; $bf_ptr=2 if $_ eq "BF_PTR2"; - ($b64l,$b64,$b32,$b16,$b8)=(1,0,0,0,0) if /SIXTY_FOUR_BIT_LONG/; ($b64l,$b64,$b32,$b16,$b8)=(0,1,0,0,0) if /SIXTY_FOUR_BIT/; + ($b64l,$b64,$b32,$b16,$b8)=(1,0,0,0,0) if /SIXTY_FOUR_BIT_LONG/; ($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0) if /THIRTY_TWO_BIT/; ($b64l,$b64,$b32,$b16,$b8)=(0,0,0,1,0) if /SIXTEEN_BIT/; ($b64l,$b64,$b32,$b16,$b8)=(0,0,0,0,1) if /EIGHT_BIT/; @@ -375,9 +435,9 @@ close(OUT); &Rename($rc4,&file_old($rc4)); &Rename($n,$rc4); -(($in=$rc4_enc) =~ s/\.([^.]+)/.$postfix/); -$n=&file_new($rc4_enc); -open(IN,"<".$in) || die "unable to read $rc4_enc:$!\n"; +(($in=$rc4_locl) =~ s/\.([^.]+)/.$postfix/); +$n=&file_new($rc4_locl); +open(IN,"<".$in) || die "unable to read $rc4_locl:$!\n"; open(OUT,">$n") || die "unable to read $n:$!\n"; while (<IN>) { @@ -388,8 +448,8 @@ while (<IN>) } close(IN); close(OUT); -&Rename($rc4_enc,&file_old($rc4_enc)); -&Rename($n,$rc4_enc); +&Rename($rc4_locl,&file_old($rc4_locl)); +&Rename($n,$rc4_locl); (($in=$md2) =~ s/\.([^.]+)/.$postfix/); $n=&file_new($md2); |