diff options
-rwxr-xr-x | Configure | 114 | ||||
-rw-r--r-- | INSTALL | 69 | ||||
-rw-r--r-- | Makefile.org | 15 | ||||
-rwxr-xr-x | config | 6 |
4 files changed, 121 insertions, 83 deletions
@@ -9,11 +9,14 @@ require 5.000; use strict; # see INSTALL for instructions. -# -# Usage: Configure [-Dxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-asm] [rsaref] -# [386] platform[:flags] -# + +my $usage="Usage: Configure [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-asm] [rsaref] [--openssldir=OPENSSLDIR] [--prefix=DIR] os/compiler\n"; + # Options: +# --openssldir install OpenSSL in OPENSSLDIR (Default: DIR/ssl if the +# --prefix option is given; /usr/local/ssl otherwise) +# --prefix prefix for the OpenSSL include, lib and bin directories +# (Default: the OPENSSLDIR directory) # rsaref use RSAref # no-asm do not use assembler # 386 generate 80386 code @@ -113,8 +116,8 @@ my %table=( "solaris-usparc-sc4","cc:-xtarget=ultra -xarch=v8plus -Xa -xO5 -DB_ENDIAN:\ -lsocket -lnsl:\ BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", -"solaris-sparc-sc4-pic","cc:-xO5 -Xa -DB_ENDIAN -KPIC:-lsocket -lnsl:\ - BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", +#"solaris-sparc-sc4-pic","cc:-xO5 -Xa -DB_ENDIAN -KPIC:-lsocket -lnsl:\ +# BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", # Sunos configs, assuming sparc for the gcc one. ##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::DES_UNROLL:::", @@ -249,6 +252,8 @@ my %table=( my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32 BC-16 CygWin32); +my $installprefix=""; +my $openssldir=""; my $no_asm=0; my $Makefile="Makefile.ssl"; my $des_locl="crypto/des/des_locl.h"; @@ -276,43 +281,43 @@ my $perl; $ranlib=&which("ranlib") or $ranlib="true"; $perl=&which("perl5") or $perl=&which("perl"); -if ($#ARGV < 0) - { - &bad_target; - exit(1); - } +&usage if ($#ARGV < 0); my $flags=""; my $libs=""; my $target=""; foreach (@ARGV) { - if ($_ =~ /^no-asm$/) + if (/^no-asm$/) { $no_asm=1; } - elsif ($_ =~ /^386$/) + elsif (/^386$/) { $processor=386; } - elsif ($_ =~ /^rsaref$/) + elsif (/^rsaref$/) { $libs.= "-lRSAglue -lrsaref "; $flags.= "-DRSAref "; } - elsif ($_ =~ /^-/) + elsif (/^-/) { - if ($_ =~ /^-[lL](.*)$/) + if (/^-[lL](.*)$/) { $libs.=$_." "; } - elsif ($_ =~ /^-D(.*)$/) + elsif (/^-[DfK](.*)$/) { $flags.=$_." "; } - elsif ($_ =~ /^-[fK](.*)$/) + elsif (/^--prefix=(.*)$/) { - $flags.=$_." "; + $installprefix=$1; + } + elsif (/^--openssldir=(.*)$/) + { + $openssldir=$1; } else { - die "unknown options, only -Dxxx, -Lxxx, -lxxx, -fxxx and -Kxxx are supported\n"; + print STDERR $usage; } } elsif ($_ =~ /^([^:]+):(.+)$/) { @@ -323,19 +328,19 @@ foreach (@ARGV) { die "target already defined - $target\n" if ($target ne ""); $target=$_; - if (!defined($table{$target})) - { - &bad_target; - exit(1); - } } - } +} -if (!defined($table{$target})) - { - &bad_target; - exit(1); - } +&usage if (!defined($table{$target})); + +$openssldir="/usr/local/ssl" if ($openssldir eq "" and $installprefix eq ""); +$installprefix=$openssldir if $installprefix eq ""; + +chop $openssldir if $openssldir =~ /\/$/; +chop $installprefix if $installprefix =~ /\/$/; + +$openssldir=$installprefix . "/ssl" if $openssldir eq ""; +$openssldir=$installprefix . "/" . $openssldir if $openssldir !~ /^\//; my $IsWindows=scalar grep /^$target$/,@WinTargets; @@ -386,6 +391,8 @@ open(OUT,">$Makefile") || die "unable to create $Makefile:$!\n"; while (<IN>) { chop; + s/^INSTALLTOP=.*$/INSTALLTOP=$installprefix/; + s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/; s/^PLATFORM=.*$/PLATFORM=$target/; s/^CC=.*$/CC= $cc/; s/^CFLAG=.*$/CFLAG= $cflags/; @@ -470,7 +477,9 @@ open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h. open(OUT,'>crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n"; while (<IN>) { - if (/^#((define)|(undef))\s+SIXTY_FOUR_BIT_LONG/) + if (/^#defined\s+OPENSSLDIR/) + { print OUT "#define OPENSSLDIR $openssldir\n"; } + elsif (/^#((define)|(undef))\s+SIXTY_FOUR_BIT_LONG/) { printf OUT "#%s SIXTY_FOUR_BIT_LONG\n",($b64l)?"define":"undef"; } elsif (/^#((define)|(undef))\s+SIXTY_FOUR_BIT/) { printf OUT "#%s SIXTY_FOUR_BIT\n",($b64)?"define":"undef"; } @@ -540,7 +549,13 @@ if($IsWindows) { close(OUT); } -system 'make -f Makefile.ssl links' if !$IsWindows; +if (!$IsWindows) + { + (system 'make -f Makefile.ssl links') == 0 or exit $?; + } + +&dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',); +&dofile("util/mk1mf.pl",$openssldir,('^\$INSTALLTOP=','$INSTALLTOP="%s";',)); my $pwd=`pwd`; chop($pwd); @@ -557,7 +572,7 @@ conflicts with other libraries. To compile programs that use the old form <foo.h>, usually an additional compiler option will suffice: E.g., add - -I/usr/local/ssl/include/openssl + -I$installprefix/include/openssl or -I$pwd/include/openssl to the CFLAGS in the Makefile of the program that you want to compile @@ -570,18 +585,26 @@ EOF exit(0); -sub bad_target +sub usage { - print STDERR "Usage: Configure [-Dxxx] [-Lxxx] [-lxxx] [no-asm] [rsaref] os/compiler\n"; + print STDERR $usage; print STDERR "pick os/compiler from:"; my $j=0; my $i; foreach $i (sort keys %table) { + next if $i =~ /^debug/; + print STDERR "\n" if ($j++ % 4) == 0; + printf(STDERR "%-18s ",$i); + } + foreach $i (sort keys %table) + { + next if $i !~ /^debug/; print STDERR "\n" if ($j++ % 4) == 0; printf(STDERR "%-18s ",$i); } print STDERR "\n"; + exit(1); } sub which @@ -598,3 +621,22 @@ sub which } } +sub dofile + { + my $f; my $p; my %m; my @a; my $k; my $ff; + ($f,$p,%m)=@_; + + open(IN,"<$f") || die "unable to open $f:$!\n"; + @a=<IN>; + close(IN); + foreach $k (keys %m) + { + grep(/$k/ && ($_=sprintf($m{$k}."\n",$p)),@a); + } + ($ff=$f) =~ s/\..*$//; + open(OUT,">$ff.new") || die "unable to open $f:$!\n"; + print OUT @a; + close(OUT); + rename($f,"$ff.bak") || die "unable to rename $f\n"; + rename("$ff.new",$f) || die "unable to rename $ff.new\n"; + } @@ -23,16 +23,25 @@ This will build and install OpenSSL in the default location, which is (for historical reasons) /usr/local/ssl. If you want to install it anywhere else, - do this after running `./config': + run config like this: - $ perl util/ssldir.pl /new/install/path + $ ./config --prefix=/usr/local --openssldir=/usr/local/openssl There are several options to ./config to customize the build: - rsaref Build with RSADSI's RSAREF toolkit. - no-asm Build with no assembler code. - 386 Use the 80386 instruction set only (the default x86 code is - more efficient, but requires at least a 486). + --prefix=DIR Install in DIR/bin, DIR/lib, DIR/include. Configuration + files used by OpenSSL will be in DIR/ssl or the directory + specified by --openssldir. + + --openssldir=DIR Directory for OpenSSL files. If no prefix is specified, + the library files and binaries are also installed there. + + rsaref Build with RSADSI's RSAREF toolkit. + + no-asm Build with no assembler code. + + 386 Use the 80386 instruction set only (the default x86 code is + more efficient, but requires at least a 486). If anything goes wrong, follow the detailed instructions below. If your operating system is not (yet) supported by OpenSSL, see the section on @@ -46,8 +55,8 @@ $ ./config This guesses at your operating system (and compiler, if necessary) and - configures OpenSSL based on this guess. Check the first line of output to - see if it guessed correctly. If it did not get it correct or you want to + configures OpenSSL based on this guess. Run ./config -t -v to see + if it guessed correctly. If it did not get it correct or you want to use a different compiler then go to step 1b. Otherwise go to step 2. 1b. Configure OpenSSL for your operating system manually @@ -63,7 +72,7 @@ as the argument to ./Configure. For example, a "linux-elf" user would run: - $ ./Configure linux-elf + $ ./Configure linux-elf [--prefix=DIR] [--openssldir=OPENSSLDIR] If your system is not available, you will have to edit the Configure program and add the correct configuration for your system. @@ -72,20 +81,7 @@ various macros in crypto/opensslconf.h (generated from crypto/opensslconf.h.in). - 2. Set the install directory - - If the install directory will be the default of /usr/local/ssl, skip to - the next stage. Otherwise, run - - $ perl util/ssldir.pl /new/install/path - - This configures the installation location into the "install" target of - the top-level Makefile, and also updates some defines in an include file - so that the default certificate directory is under the proper - installation directory. It also updates a few utility files used in the - build process. - - 3. Build OpenSSL by running: + 2. Build OpenSSL by running: $ make @@ -93,7 +89,7 @@ OpenSSL binary ("openssl"). The libraries will be built in the top-level directory, and the binary will be in the "apps" directory. - 4. After a successful build, the libraries should be tested. Run: + 3. After a successful build, the libraries should be tested. Run: $ make rehash $ make test @@ -101,24 +97,27 @@ (The first line makes the test certificates in the "certs" directory accessable via an hash name, which is required for some of the tests). - 5. If everything tests ok, install OpenSSL with + 4. If everything tests ok, install OpenSSL with $ make install This will create the installation directory (if it does not exist) and then create the following subdirectories: - bin Contains the openssl binary and a few other - utility programs. - include Contains the header files needed if you want to - compile programs with libcrypto or libssl. - lib Contains the library files themselves and the - OpenSSL configuration file "openssl.cnf". - certs Initially empty, this is the default location - for certificate files. - private Initially empty, this is the default location - for private key files. + certs Initially empty, this is the default location + for certificate files. + private Initially empty, this is the default location + for private key files. + lib Contains the OpenSSL configuration file "openssl.cnf". + + If you didn't chose a different installation prefix, lib also contains + the library files themselves, and the following additional subdirectories + will be created: + bin Contains the openssl binary and a few other + utility programs. + include/openssl Contains the header files needed if you want to + compile programs with libcrypto or libssl. NOTE: The header files used to reside directly in the include directory, but have now been moved to include/openssl so that diff --git a/Makefile.org b/Makefile.org index 0e9dfa35b5..869fe8cc5a 100644 --- a/Makefile.org +++ b/Makefile.org @@ -4,6 +4,10 @@ VERSION = 0.9.2b PLATFORM=dist +INSTALLTOP=/usr/local/ssl + +# Do not edit this manually. Use Configure --openssldir=DIR do change this! +OPENSSLDIR=/usr/local/ssl # RSAref - Define if we are to link with RSAref. # NO_IDEA - Define to build without the IDEA algorithm @@ -139,9 +143,6 @@ SDIRS= \ buffer bio stack lhash rand err objects \ evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp -# Do not edit this manually. Use util/ssldir.pl do change this! -INSTALLTOP=/usr/local/ssl - MAKEFILE= Makefile.ssl MAKE= make -f Makefile.ssl @@ -286,14 +287,14 @@ dist_pem_h: install: all @-mkdir -p $(INSTALLTOP)/bin 2>/dev/null @-mkdir -p $(INSTALLTOP)/lib 2>/dev/null - @-mkdir -p $(INSTALLTOP)/include 2>/dev/null @-mkdir -p $(INSTALLTOP)/include/openssl 2>/dev/null - @-mkdir -p $(INSTALLTOP)/certs 2>/dev/null - @-mkdir -p $(INSTALLTOP)/private 2>/dev/null + @-mkdir -p $(OPENSSLDIR)/certs 2>/dev/null + @-mkdir -p $(OPENSSLDIR)/private 2>/dev/null + @-mkdir -p $(OPENSSLDIR)/lib 2>/dev/null @for i in $(DIRS) ;\ do \ (cd $$i; echo "installing $$i..."; \ - $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' install ); \ + $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' install ); \ done @for i in $(LIBS) ;\ do \ @@ -268,11 +268,7 @@ Usage: config [options] -h This help. Any other text will be passed to the Configure perl script. -Useful options include - no-asm Build with no assember code. - -Dxxx Add xxx define to compilation. - -Lxxx Add xxx library include path to build. - -lxxx Add xxx library to build. +See INSTALL for instructions. EOF ;; |