diff options
-rw-r--r-- | CHANGES | 128 | ||||
-rw-r--r-- | NEWS | 13 |
2 files changed, 70 insertions, 71 deletions
@@ -2984,12 +2984,12 @@ 1. Do not use record version number > TLS 1.0 in initial client hello: some (but not all) hanging servers will now work. 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate - the number of ciphers sent in the client hello. This should be + the number of ciphers sent in the client hello. This should be set to an even number, such as 50, for example by passing: -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure. Most broken servers should now work. 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable - TLS 1.2 client support entirely. + TLS 1.2 client support entirely. [Steve Henson] *) Fix SEGV in Vector Permutation AES module observed in OpenSSH. @@ -3026,12 +3026,12 @@ *) Extensive assembler packs updates, most notably: - - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support; - - x86[_64]: SSSE3 support (SHA1, vector-permutation AES); - - x86_64: bit-sliced AES implementation; - - ARM: NEON support, contemporary platforms optimizations; - - s390x: z196 support; - - *: GHASH and GF(2^m) multiplication implementations; + - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support; + - x86[_64]: SSSE3 support (SHA1, vector-permutation AES); + - x86_64: bit-sliced AES implementation; + - ARM: NEON support, contemporary platforms optimizations; + - s390x: z196 support; + - *: GHASH and GF(2^m) multiplication implementations; [Andy Polyakov] @@ -3384,7 +3384,7 @@ *) Add protection against ECDSA timing attacks as mentioned in the paper by Billy Bob Brumley and Nicola Tuveri, see: - http://eprint.iacr.org/2011/232.pdf + http://eprint.iacr.org/2011/232.pdf [Billy Bob Brumley and Nicola Tuveri] @@ -5457,16 +5457,16 @@ takes an extra flags argument for optional functionality. Currently, the following flags are defined: - OBJ_BSEARCH_VALUE_ON_NOMATCH - This one gets OBJ_bsearch_ex() to return a pointer to the first - element where the comparing function returns a negative or zero - number. + OBJ_BSEARCH_VALUE_ON_NOMATCH + This one gets OBJ_bsearch_ex() to return a pointer to the first + element where the comparing function returns a negative or zero + number. - OBJ_BSEARCH_FIRST_VALUE_ON_MATCH - This one gets OBJ_bsearch_ex() to return a pointer to the first - element where the comparing function returns zero. This is useful - if there are more than one element where the comparing function - returns zero. + OBJ_BSEARCH_FIRST_VALUE_ON_MATCH + This one gets OBJ_bsearch_ex() to return a pointer to the first + element where the comparing function returns zero. This is useful + if there are more than one element where the comparing function + returns zero. [Richard Levitte] *) Make it possible to create self-signed certificates with 'openssl ca' @@ -5613,8 +5613,8 @@ is defined as follows (according to X.509_4thEditionDraftV6.pdf): CertificatePair ::= SEQUENCE { - forward [0] Certificate OPTIONAL, - reverse [1] Certificate OPTIONAL, + forward [0] Certificate OPTIONAL, + reverse [1] Certificate OPTIONAL, -- at least one of the pair shall be present -- } Also implement the PEM functions to read and write certificate @@ -6616,15 +6616,15 @@ build directory is the following (tested on Linux), maybe with some local tweaks: - # Place yourself outside of the OpenSSL source tree. In - # this example, the environment variable OPENSSL_SOURCE - # is assumed to contain the absolute OpenSSL source directory. - mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`" - cd objtree/"`uname -s`-`uname -r`-`uname -m`" - (cd $OPENSSL_SOURCE; find . -type f) | while read F; do - mkdir -p `dirname $F` - ln -s $OPENSSL_SOURCE/$F $F - done + # Place yourself outside of the OpenSSL source tree. In + # this example, the environment variable OPENSSL_SOURCE + # is assumed to contain the absolute OpenSSL source directory. + mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`" + cd objtree/"`uname -s`-`uname -r`-`uname -m`" + (cd $OPENSSL_SOURCE; find . -type f) | while read F; do + mkdir -p `dirname $F` + ln -s $OPENSSL_SOURCE/$F $F + done To be absolutely sure not to disturb the source tree, a "make clean" is a good thing. If it isn't successful, don't worry about it, @@ -7119,8 +7119,8 @@ des_key_schedule ks; - des_set_key_checked(..., &ks); - des_ncbc_encrypt(..., &ks, ...); + des_set_key_checked(..., &ks); + des_ncbc_encrypt(..., &ks, ...); (Note that a later change renames 'des_...' into 'DES_...'.) [Ben Laurie] @@ -7326,7 +7326,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k '-pre' and '-post' switches. '-post' is only used if '-t' is specified and the ENGINE is successfully initialised. The syntax for the individual commands are colon-separated, for example; - openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so + openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so [Geoff] *) New dynamic control command support for ENGINEs. ENGINEs can now @@ -7514,16 +7514,16 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL in the source file (foo.c) like this: - OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1; - OPENSSL_IMPLEMENT_GLOBAL(double,bar); + OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1; + OPENSSL_IMPLEMENT_GLOBAL(double,bar); To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL and OPENSSL_GLOBAL_REF in the header file (foo.h) like this: - OPENSSL_DECLARE_GLOBAL(int,foo); - #define foo OPENSSL_GLOBAL_REF(foo) - OPENSSL_DECLARE_GLOBAL(double,bar); - #define bar OPENSSL_GLOBAL_REF(bar) + OPENSSL_DECLARE_GLOBAL(int,foo); + #define foo OPENSSL_GLOBAL_REF(foo) + OPENSSL_DECLARE_GLOBAL(double,bar); + #define bar OPENSSL_GLOBAL_REF(bar) The #defines are very important, and therefore so is including the header file everywhere where the defined globals are used. @@ -7727,7 +7727,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k to data. This was previously part of the PKCS7 ASN1 code. This was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures. [Steve Henson, reported by Kenneth R. Robinette - <support@securenetterm.com>] + <support@securenetterm.com>] *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1 routines: without these tracing memory leaks is very painful. @@ -7741,7 +7741,7 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime. [Steve Henson, reported by Kenneth R. Robinette - <support@securenetterm.com>] + <support@securenetterm.com>] *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously result in a zero length in the ASN1_INTEGER structure which was @@ -7826,10 +7826,10 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k settings for extended allocation functions, the following functions are provided: - CRYPTO_set_mem_ex_functions - CRYPTO_set_locked_mem_ex_functions - CRYPTO_get_mem_ex_functions - CRYPTO_get_locked_mem_ex_functions + CRYPTO_set_mem_ex_functions + CRYPTO_set_locked_mem_ex_functions + CRYPTO_get_mem_ex_functions + CRYPTO_get_locked_mem_ex_functions These work the same way as CRYPTO_set_mem_functions and friends. CRYPTO_get_[locked_]mem_functions now writes 0 where such an @@ -8170,11 +8170,11 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Add the following functions: - ENGINE_load_cswift() - ENGINE_load_chil() - ENGINE_load_atalla() - ENGINE_load_nuron() - ENGINE_load_builtin_engines() + ENGINE_load_cswift() + ENGINE_load_chil() + ENGINE_load_atalla() + ENGINE_load_nuron() + ENGINE_load_builtin_engines() That way, an application can itself choose if external engines that are built-in in OpenSSL shall ever be used or not. The benefit is @@ -8423,8 +8423,8 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX and get fix the header length calculation. [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>, - Alon Kantor <alonk@checkpoint.com> (and others), - Steve Henson] + Alon Kantor <alonk@checkpoint.com> (and others), + Steve Henson] *) Use proper error handling instead of 'assertions' in buffer overflow checks added in 0.9.6e. This prevents DoS (the @@ -9498,23 +9498,23 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k through a logging bio, to cover all the levels that are available through syslog. The prefixes are now: - PANIC, EMERG, EMR => LOG_EMERG - ALERT, ALR => LOG_ALERT - CRIT, CRI => LOG_CRIT - ERROR, ERR => LOG_ERR - WARNING, WARN, WAR => LOG_WARNING - NOTICE, NOTE, NOT => LOG_NOTICE - INFO, INF => LOG_INFO - DEBUG, DBG => LOG_DEBUG + PANIC, EMERG, EMR => LOG_EMERG + ALERT, ALR => LOG_ALERT + CRIT, CRI => LOG_CRIT + ERROR, ERR => LOG_ERR + WARNING, WARN, WAR => LOG_WARNING + NOTICE, NOTE, NOT => LOG_NOTICE + INFO, INF => LOG_INFO + DEBUG, DBG => LOG_DEBUG and as before, if none of those prefixes are present at the beginning of the string, LOG_ERR is chosen. On Win32, the LOG_* levels are mapped according to this: - LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE - LOG_WARNING => EVENTLOG_WARNING_TYPE - LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE + LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE + LOG_WARNING => EVENTLOG_WARNING_TYPE + LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE [Richard Levitte] @@ -10559,9 +10559,9 @@ des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k With these changes, a new set of functions and macros have appeared: - CRYPTO_set_mem_debug_functions() [F] + CRYPTO_set_mem_debug_functions() [F] CRYPTO_get_mem_debug_functions() [F] - CRYPTO_dbg_set_options() [F] + CRYPTO_dbg_set_options() [F] CRYPTO_dbg_get_options() [F] CRYPTO_malloc_debug_init() [M] @@ -381,7 +381,7 @@ o Compression memory leak fixed. o Compression session resumption fixed. o Ticket and SNI coexistence fixes. - o Many fixes to DTLS handling. + o Many fixes to DTLS handling. Major changes between OpenSSL 0.9.8k and OpenSSL 0.9.8l [5 Nov 2009]: @@ -414,7 +414,7 @@ o Add gcc 4.2 support. o Add support for AES and SSE2 assembly language optimization for VC++ build. - o Support for RFC4507bis and server name extensions if explicitly + o Support for RFC4507bis and server name extensions if explicitly selected at compile time. o DTLS improvements. o RFC4507bis support. @@ -594,7 +594,7 @@ Major changes between OpenSSL 0.9.7a and OpenSSL 0.9.7b [10 Apr 2003]: o Security: counter the Klima-Pokorny-Rosa extension of - Bleichbacher's attack + Bleichbacher's attack o Security: make RSA blinding default. o Configuration: Irix fixes, AIX fixes, better mingw support. o Support for new platforms: linux-ia64-ecc. @@ -654,7 +654,7 @@ o SSL/TLS: allow optional cipher choice according to server's preference. o SSL/TLS: allow server to explicitly set new session ids. o SSL/TLS: support Kerberos cipher suites (RFC2712). - Only supports MIT Kerberos for now. + Only supports MIT Kerberos for now. o SSL/TLS: allow more precise control of renegotiations and sessions. o SSL/TLS: add callback to retrieve SSL/TLS messages. o SSL/TLS: support AES cipher suites (RFC3268). @@ -667,7 +667,7 @@ Major changes between OpenSSL 0.9.6i and OpenSSL 0.9.6j [10 Apr 2003]: o Security: counter the Klima-Pokorny-Rosa extension of - Bleichbacher's attack + Bleichbacher's attack o Security: make RSA blinding default. o Build: shared library support fixes. @@ -779,7 +779,7 @@ Major changes between OpenSSL 0.9.5 and OpenSSL 0.9.5a [1 Apr 2000]: - o Bug fixes for Win32, SuSE Linux, NeXTSTEP and FreeBSD 2.2.8 + o Bug fixes for Win32, SuSE Linux, NeXTSTEP and FreeBSD 2.2.8 o Shared library support for HPUX and Solaris-gcc o Support of Linux/IA64 o Assembler support for Mingw32 @@ -879,4 +879,3 @@ o Extended ASN.1 parser routines o Adjustments of the source tree for CVS o Support for various new platforms - |