diff options
-rwxr-xr-x | crypto/sha/asm/sha512-ia64.pl | 351 |
1 files changed, 182 insertions, 169 deletions
diff --git a/crypto/sha/asm/sha512-ia64.pl b/crypto/sha/asm/sha512-ia64.pl index 1c6ce56522..59f889a095 100755 --- a/crypto/sha/asm/sha512-ia64.pl +++ b/crypto/sha/asm/sha512-ia64.pl @@ -1,7 +1,7 @@ #!/usr/bin/env perl # # ==================================================================== -# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL # project. The module is, however, dual licensed under OpenSSL and # CRYPTOGAMS licenses depending on where you obtain it. For further # details see http://www.openssl.org/~appro/cryptogams/. @@ -48,16 +48,22 @@ # because on Itanium 1 stall on MM result is accompanied by # pipeline flush, which takes 6 cycles:-( # -# Resulting performance numbers for 900MHz Itanium 2 system: +# June 2012 # -# The 'numbers' are in 1000s of bytes per second processed. -# type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes -# sha1(*) 6210.14k 20376.30k 52447.83k 85870.05k 105478.12k -# sha256 7476.45k 20572.05k 41538.34k 56062.29k 62093.18k -# sha512 4996.56k 20026.28k 47597.20k 85278.79k 111501.31k +# Improve performance by 15-20%. Note about "rules of engagement" +# above. Contemporary cores are equipped with additional shifter, +# so that they should perform even better than below, presumably +# by ~10%. # -# (*) SHA1 numbers are for HP-UX compiler and are presented purely -# for reference purposes. I bet it can improved too... +###################################################################### +# Current performance in cycles per processed byte for Itanium 2 +# pre-9000 series [little-endian] system: +# +# SHA1(*) 5.7 +# SHA256 12.6 +# SHA512 6.7 +# +# (*) SHA1 result is presented purely for reference purposes. # # To generate code, pass the file name with either 256 or 512 in its # name and compiler flags. @@ -106,8 +112,8 @@ if (!defined($big_endian)) { $big_endian=(unpack('L',pack('N',1))==1); } $code=<<___; -.ident \"$output, version 1.1\" -.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\" +.ident \"$output, version 2.0\" +.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@openssl.org>\" .explicit .text @@ -115,26 +121,25 @@ pfssave=r2; lcsave=r3; prsave=r14; K=r15; -A=r16; B=r17; C=r18; D=r19; -E=r20; F=r21; G=r22; H=r23; +A_=r16; B_=r17; C_=r18; D_=r19; +E_=r20; F_=r21; G_=r22; H_=r23; T1=r24; T2=r25; s0=r26; s1=r27; t0=r28; t1=r29; Ktbl=r30; ctx=r31; // 1st arg -input=r48; // 2nd arg -num=r49; // 3rd arg -sgm0=r50; sgm1=r51; // small constants -A_=r54; B_=r55; C_=r56; D_=r57; -E_=r58; F_=r59; G_=r60; H_=r61; +input=r56; // 2nd arg +num=r57; // 3rd arg +sgm0=r58; sgm1=r59; // small constants // void $func (SHA_CTX *ctx, const void *in,size_t num[,int host]) .global $func# .proc $func# .align 32 +.skip 16 $func: .prologue .save ar.pfs,pfssave -{ .mmi; alloc pfssave=ar.pfs,3,27,0,16 +{ .mmi; alloc pfssave=ar.pfs,3,25,0,24 $ADDP ctx=0,r32 // 1st arg .save ar.lc,lcsave mov lcsave=ar.lc } @@ -145,11 +150,9 @@ $func: .body { .mib; add r8=0*$SZ,ctx - add r9=1*$SZ,ctx - brp.loop.imp .L_first16,.L_first16_end-16 } + add r9=1*$SZ,ctx } { .mib; add r10=2*$SZ,ctx - add r11=3*$SZ,ctx - brp.loop.imp .L_rest,.L_rest_end-16 };; + add r11=3*$SZ,ctx };; // load A-H .Lpic_point: @@ -164,7 +167,7 @@ $func: add Ktbl=($TABLE#-.Lpic_point),Ktbl } { .mmi; $LDW G_=[r10] $LDW H_=[r11] - cmp.ne p0,p16=0,r0 };; // used in sha256_block + cmp.ne p0,p16=0,r0 };; ___ $code.=<<___ if ($BITS==64); { .mii; and r8=7,input @@ -179,50 +182,26 @@ $code.=<<___ if ($BITS==64); ___ $code.=<<___; .L_outer: -.rotr X[16] -{ .mmi; mov A=A_ - mov B=B_ +.rotr R[8],X[16] +A=R[0]; B=R[1]; C=R[2]; D=R[3]; E=R[4]; F=R[5]; G=R[6]; H=R[7] +{ .mmi; ld1 X[15]=[input],$SZ // eliminated in sha512 + mov A=A_ mov ar.lc=14 } -{ .mmi; mov C=C_ - mov D=D_ - mov E=E_ } -{ .mmi; mov F=F_ - mov G=G_ - mov ar.ec=2 } -{ .mmi; ld1 X[15]=[input],$SZ // eliminated in 64-bit +{ .mmi; mov B=B_ + mov C=C_ + mov D=D_ } +{ .mmi; mov E=E_ + mov F=F_ + mov ar.ec=2 };; +{ .mmi; mov G=G_ mov H=H_ - mov sgm1=$sigma1[2] };; - -___ -$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); -.align 32 -.L_first16: -{ .mmi; add r9=1-$SZ,input - add r10=2-$SZ,input - add r11=3-$SZ,input };; -{ .mmi; ld1 r9=[r9] - ld1 r10=[r10] - dep.z $t1=E,32,32 } -{ .mmi; $LDW K=[Ktbl],$SZ - ld1 r11=[r11] - zxt4 E=E };; -{ .mii; or $t1=$t1,E - dep X[15]=X[15],r9,8,8 - dep r11=r10,r11,8,8 };; -{ .mmi; and T1=F,E - and T2=A,B - dep X[15]=X[15],r11,16,16 } -{ .mmi; andcm r8=G,E - and r9=A,C - mux2 $t0=A,0x44 };; // copy lower half to upper -{ .mmi; (p16) ld1 X[15-1]=[input],$SZ // prefetch - xor T1=T1,r8 // T1=((e & f) ^ (~e & g)) - _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) -{ .mib; and r10=B,C - xor T2=T2,r9 };; + mov sgm1=$sigma1[2] } +{ .mib; mov r8=0 + add r9=1-$SZ,input + brp.loop.imp .L_first16,.L_first16_end-16 };; ___ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); -// in 64-bit mode I load whole X[16] at once and take care of alignment... +// in sha512 case I load whole X[16] at once and take care of alignment... { .mmi; add r8=1*$SZ,input add r9=2*$SZ,input add r10=3*$SZ,input };; @@ -248,7 +227,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); $LDW X[ 2]=[r8],4*$SZ (p15) br.cond.dpnt.many .L7byte };; { .mmb; $LDW X[ 1]=[r9],4*$SZ - $LDW X[ 0]=[r10],4*$SZ + $LDW X[ 0]=[r10],4*$SZ } +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian br.many .L_first16 };; .L1byte: { .mmi; $LDW X[13]=[r9],4*$SZ @@ -281,7 +262,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 3]=X[ 3],X[ 2],56 } { .mii; shrp X[ 2]=X[ 2],X[ 1],56 shrp X[ 1]=X[ 1],X[ 0],56 } -{ .mib; shrp X[ 0]=X[ 0],T1,56 +{ .mib; shrp X[ 0]=X[ 0],T1,56 } +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian br.many .L_first16 };; .L2byte: { .mmi; $LDW X[11]=[input],4*$SZ @@ -313,7 +296,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 2]=X[ 2],X[ 1],48 } { .mii; shrp X[ 1]=X[ 1],X[ 0],48 shrp X[ 0]=X[ 0],T1,48 } -{ .mfb; br.many .L_first16 };; +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian + br.many .L_first16 };; .L3byte: { .mmi; $LDW X[ 9]=[r9],4*$SZ $LDW X[ 8]=[r10],4*$SZ @@ -341,7 +326,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 3]=X[ 3],X[ 2],40 } { .mii; shrp X[ 2]=X[ 2],X[ 1],40 shrp X[ 1]=X[ 1],X[ 0],40 } -{ .mib; shrp X[ 0]=X[ 0],T1,40 +{ .mib; shrp X[ 0]=X[ 0],T1,40 } +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian br.many .L_first16 };; .L4byte: { .mmi; $LDW X[ 7]=[input],4*$SZ @@ -369,7 +356,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 2]=X[ 2],X[ 1],32 } { .mii; shrp X[ 1]=X[ 1],X[ 0],32 shrp X[ 0]=X[ 0],T1,32 } -{ .mfb; br.many .L_first16 };; +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian + br.many .L_first16 };; .L5byte: { .mmi; $LDW X[ 5]=[r9],4*$SZ $LDW X[ 4]=[r10],4*$SZ @@ -393,7 +382,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 3]=X[ 3],X[ 2],24 } { .mii; shrp X[ 2]=X[ 2],X[ 1],24 shrp X[ 1]=X[ 1],X[ 0],24 } -{ .mib; shrp X[ 0]=X[ 0],T1,24 +{ .mib; shrp X[ 0]=X[ 0],T1,24 } +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian br.many .L_first16 };; .L6byte: { .mmi; $LDW X[ 3]=[input],4*$SZ @@ -417,7 +408,9 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 2]=X[ 2],X[ 1],16 } { .mii; shrp X[ 1]=X[ 1],X[ 0],16 shrp X[ 0]=X[ 0],T1,16 } -{ .mfb; br.many .L_first16 };; +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev // eliminated on big-endian + br.many .L_first16 };; .L7byte: { .mmi; $LDW X[ 1]=[r9],4*$SZ $LDW X[ 0]=[r10],4*$SZ @@ -437,128 +430,146 @@ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); shrp X[ 3]=X[ 3],X[ 2],8 } { .mii; shrp X[ 2]=X[ 2],X[ 1],8 shrp X[ 1]=X[ 1],X[ 0],8 } -{ .mib; shrp X[ 0]=X[ 0],T1,8 - br.many .L_first16 };; +{ .mib; shrp X[ 0]=X[ 0],T1,8 } +{ .mib; mov r8=0 + mux1 X[15]=X[15],\@rev };; // eliminated on big-endian .align 32 .L_first16: { .mmi; $LDW K=[Ktbl],$SZ - and T1=F,E - and T2=A,B } -{ .mmi; //$LDW X[15]=[input],$SZ // X[i]=*input++ + add A=A,r8 // H+=Sigma(0) from the past + _rotr r10=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mmi; and T1=F,E andcm r8=G,E - and r9=A,C };; -{ .mmi; xor T1=T1,r8 //T1=((e & f) ^ (~e & g)) - and r10=B,C - _rotr r11=$t1,$Sigma1[0] } // ROTR(e,14) -{ .mmi; xor T2=T2,r9 - mux1 X[15]=X[15],\@rev };; // eliminated in big-endian + (p16) mux1 X[14]=X[14],\@rev };; // eliminated on big-endian +{ .mmi; and T2=A,B + and r9=A,C + _rotr r11=$t1,$Sigma1[1] } // ROTR(e,41) +{ .mmi; xor T1=T1,r8 // T1=((e & f) ^ (~e & g)) + and r8=B,C };; +___ +$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); +.align 32 +.L_first16: +{ .mmi; add A=A,r8 // H+=Sigma(0) from the past + add r10=2-$SZ,input + add r11=3-$SZ,input };; +{ .mmi; ld1 r9=[r9] + ld1 r10=[r10] + dep.z $t1=E,32,32 } +{ .mmi; ld1 r11=[r11] + $LDW K=[Ktbl],$SZ + zxt4 E=E };; +{ .mii; or $t1=$t1,E + dep X[15]=X[15],r9,8,8 + mux2 $t0=A,0x44 };; // copy lower half to upper +{ .mmi; and T1=F,E + andcm r8=G,E + dep r11=r10,r11,8,8 };; +{ .mmi; and T2=A,B + and r9=A,C + dep X[15]=X[15],r11,16,16 };; +{ .mmi; (p16) ld1 X[15-1]=[input],$SZ // prefetch + xor T1=T1,r8 // T1=((e & f) ^ (~e & g)) + _rotr r10=$t1,$Sigma1[0] } // ROTR(e,14) +{ .mmi; and r8=B,C + _rotr r11=$t1,$Sigma1[1] };; // ROTR(e,18) ___ $code.=<<___; -{ .mib; add T1=T1,H // T1=Ch(e,f,g)+h - _rotr r8=$t1,$Sigma1[1] } // ROTR(e,18) -{ .mib; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) - mov H=G };; -{ .mib; xor r11=r8,r11 - _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) -{ .mib; mov G=F - mov F=E };; -{ .mib; xor r9=r9,r11 // r9=Sigma1(e) - _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) -{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] - mov E=D };; -{ .mib; add T1=T1,r9 // T1+=Sigma1(e) - _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) -{ .mib; mov D=C - mov C=B };; -{ .mib; add T1=T1,X[15] // T1+=X[i] - _rotr r8=$t0,$Sigma0[2] } // ROTR(a,39) -{ .mib; xor r10=r10,r11 - mux2 X[15]=X[15],0x44 };; // eliminated in 64-bit -{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) - mov B=A - add A=T1,T2 };; -{ .mib; add E=E,T1 - add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) - br.ctop.sptk .L_first16 };; +{ .mmi; add T1=T1,H // T1=Ch(e,f,g)+h + xor r10=r10,r11 + _rotr r11=$t1,$Sigma1[2] } // ROTR(e,41) +{ .mmi; xor T2=T2,r9 + add K=K,X[15] };; +{ .mmi; add T1=T1,K // T1+=K[i]+X[i] + xor T2=T2,r8 // T2=((a & b) ^ (a & c) ^ (b & c)) + _rotr r8=$t0,$Sigma0[0] } // ROTR(a,28) +{ .mmi; xor r11=r11,r10 // Sigma1(e) + _rotr r9=$t0,$Sigma0[1] };; // ROTR(a,34) +{ .mmi; add T1=T1,r11 // T+=Sigma1(e) + xor r8=r8,r9 + _rotr r9=$t0,$Sigma0[2] };; // ROTR(a,39) +{ .mmi; xor r8=r8,r9 // Sigma0(a) + add D=D,T1 + mux2 H=X[15],0x44 } // mov H=X[15] in sha512 +{ .mib; (p16) add r9=1-$SZ,input // not used in sha512 + add X[15]=T1,T2 // H=T1+Maj(a,b,c) + br.ctop.sptk .L_first16 };; .L_first16_end: -{ .mii; mov ar.lc=$rounds-17 - mov ar.ec=1 };; +{ .mib; mov ar.lc=$rounds-17 + brp.loop.imp .L_rest,.L_rest_end-16 } +{ .mib; mov ar.ec=1 + br.many .L_rest };; .align 32 .L_rest: -.rotr X[16] -{ .mib; $LDW K=[Ktbl],$SZ +{ .mmi; $LDW K=[Ktbl],$SZ + add A=A,r8 // H+=Sigma0(a) from the past _rotr r8=X[15-1],$sigma0[0] } // ROTR(s0,1) -{ .mib; $ADD X[15]=X[15],X[15-9] // X[i&0xF]+=X[(i+9)&0xF] - $SHRU s0=X[15-1],sgm0 };; // s0=X[(i+1)&0xF]>>7 +{ .mmi; add X[15]=X[15],X[15-9] // X[i&0xF]+=X[(i+9)&0xF] + $SHRU s0=X[15-1],sgm0 };; // s0=X[(i+1)&0xF]>>7 { .mib; and T1=F,E _rotr r9=X[15-1],$sigma0[1] } // ROTR(s0,8) { .mib; andcm r10=G,E - $SHRU s1=X[15-14],sgm1 };; // s1=X[(i+14)&0xF]>>6 + $SHRU s1=X[15-14],sgm1 };; // s1=X[(i+14)&0xF]>>6 +// Pair of mmi; splits on Itanium 1 and prevents pipeline flush +// upon $SHRU output usage { .mmi; xor T1=T1,r10 // T1=((e & f) ^ (~e & g)) xor r9=r8,r9 - _rotr r10=X[15-14],$sigma1[0] };;// ROTR(s1,19) -{ .mib; and T2=A,B - _rotr r11=X[15-14],$sigma1[1] }// ROTR(s1,61) -{ .mib; and r8=A,C };; + _rotr r10=X[15-14],$sigma1[0] }// ROTR(s1,19) +{ .mmi; and T2=A,B + and r8=A,C + _rotr r11=X[15-14],$sigma1[1] };;// ROTR(s1,61) ___ $t0="t0", $t1="t1", $code.=<<___ if ($BITS==32); -// I adhere to mmi; in order to hold Itanium 1 back and avoid 6 cycle -// pipeline flush in last bundle. Note that even on Itanium2 the -// latter stalls for one clock cycle... -{ .mmi; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) - dep.z $t1=E,32,32 } -{ .mmi; xor r10=r11,r10 - zxt4 E=E };; -{ .mmi; or $t1=$t1,E - xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) - mux2 $t0=A,0x44 };; // copy lower half to upper +{ .mib; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) + dep.z $t1=E,32,32 } +{ .mib; xor r10=r11,r10 + zxt4 E=E };; +{ .mii; xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) + shrp r9=E,$t1,32+$Sigma1[0] // ROTR(e,14) + mux2 $t0=A,0x44 };; // copy lower half to upper +// Pair of mmi; splits on Itanium 1 and prevents pipeline flush +// upon mux2 output usage { .mmi; xor T2=T2,r8 - _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) + shrp r8=E,$t1,32+$Sigma1[1]} // ROTR(e,18) { .mmi; and r10=B,C add T1=T1,H // T1=Ch(e,f,g)+h - $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) + or $t1=$t1,E };; ___ $t0="A", $t1="E", $code.=<<___ if ($BITS==64); { .mib; xor s0=s0,r9 // s0=sigma0(X[(i+1)&0xF]) - _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) + _rotr r9=$t1,$Sigma1[0] } // ROTR(e,14) { .mib; xor r10=r11,r10 - xor T2=T2,r8 };; + xor T2=T2,r8 };; { .mib; xor s1=s1,r10 // s1=sigma1(X[(i+14)&0xF]) - add T1=T1,H } + _rotr r8=$t1,$Sigma1[1] } // ROTR(e,18) { .mib; and r10=B,C - $ADD X[15]=X[15],s0 };; // X[i&0xF]+=sigma0(X[(i+1)&0xF]) + add T1=T1,H };; // T1+=H ___ $code.=<<___; -{ .mmi; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) - mov H=G - _rotr r8=$t1,$Sigma1[1] };; // ROTR(e,18) -{ .mmi; xor r11=r8,r9 - $ADD X[15]=X[15],s1 // X[i&0xF]+=sigma1(X[(i+14)&0xF]) - _rotr r9=$t1,$Sigma1[2] } // ROTR(e,41) -{ .mmi; mov G=F - mov F=E };; -{ .mib; xor r9=r9,r11 // r9=Sigma1(e) - _rotr r10=$t0,$Sigma0[0] } // ROTR(a,28) -{ .mib; add T1=T1,K // T1=Ch(e,f,g)+h+K512[i] - mov E=D };; -{ .mib; add T1=T1,r9 // T1+=Sigma1(e) - _rotr r11=$t0,$Sigma0[1] } // ROTR(a,34) -{ .mib; mov D=C - mov C=B };; -{ .mmi; add T1=T1,X[15] // T1+=X[i] - xor r10=r10,r11 - _rotr r8=$t0,$Sigma0[2] };; // ROTR(a,39) -{ .mmi; xor r10=r8,r10 // r10=Sigma0(a) - mov B=A - add A=T1,T2 };; -{ .mib; add E=E,T1 - add A=A,r10 // T2=Maj(a,b,c)+Sigma0(a) - br.ctop.sptk .L_rest };; +{ .mib; xor r9=r9,r8 + _rotr r8=$t1,$Sigma1[2] } // ROTR(e,41) +{ .mib; xor T2=T2,r10 // T2=((a & b) ^ (a & c) ^ (b & c)) + add X[15]=X[15],s0 };; // X[i]+=sigma0(X[i+1]) +{ .mmi; xor r9=r9,r8 // Sigma1(e) + add X[15]=X[15],s1 // X[i]+=sigma0(X[i+14]) + _rotr r8=$t0,$Sigma0[0] };; // ROTR(a,28) +{ .mmi; add K=K,X[15] + add T1=T1,r9 // T1+=Sigma1(e) + _rotr r9=$t0,$Sigma0[1] };; // ROTR(a,34) +{ .mmi; add T1=T1,K // T1+=K[i]+X[i] + xor r8=r8,r9 + _rotr r9=$t0,$Sigma0[2] };; // ROTR(a,39) +{ .mib; add D=D,T1 + mux2 H=X[15],0x44 } // mov H=X[15] in sha512 +{ .mib; xor r8=r8,r9 // Sigma0(a) + add X[15]=T1,T2 // H=T1+Maj(a,b,c) + br.ctop.sptk .L_rest };; .L_rest_end: +{ .mmi; add A=A,r8 };; // H+=Sigma0(a) from the past { .mmi; add A_=A_,A add B_=B_,B add C_=C_,C } @@ -590,17 +601,19 @@ $code.=<<___; .endp $func# ___ -$code =~ s/\`([^\`]*)\`/eval $1/gem; -$code =~ s/_rotr(\s+)([^=]+)=([^,]+),([0-9]+)/shrp$1$2=$3,$3,$4/gm; -if ($BITS==64) { - $code =~ s/mux2(\s+)\S+/nop.i$1 0x0/gm; - $code =~ s/mux1(\s+)\S+/nop.i$1 0x0/gm if ($big_endian); - $code =~ s/(shrp\s+X\[[^=]+)=([^,]+),([^,]+),([1-9]+)/$1=$3,$2,64-$4/gm +foreach(split($/,$code)) { + s/\`([^\`]*)\`/eval $1/gem; + s/_rotr(\s+)([^=]+)=([^,]+),([0-9]+)/shrp$1$2=$3,$3,$4/gm; + if ($BITS==64) { + s/mux2(\s+)([^=]+)=([^,]+),\S+/mov$1 $2=$3/gm; + s/mux1(\s+)\S+/nop.i$1 0x0/gm if ($big_endian); + s/(shrp\s+X\[[^=]+)=([^,]+),([^,]+),([1-9]+)/$1=$3,$2,64-$4/gm if (!$big_endian); - $code =~ s/ld1(\s+)X\[\S+/nop.m$1 0x0/gm; -} + s/ld1(\s+)X\[\S+/nop.m$1 0x0/gm; + } -print $code; + print $_,"\n"; +} print<<___ if ($BITS==32); .align 64 |