clean away old VMS cruft

The old building scripts get removed, they are hopelessly gone in bit
rot by now.

Also remove the old symbol hacks.  They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.

Reviewed-by: Rich Salz <rsalz@openssl.org>

1 files changed, 0 insertions, 1548 deletions

diff --git a/makevms.com b/makevms.com
deleted file mode 100755
index bfaf261b4e..0000000000
--- a/makevms.com
+++ /dev/null
@@ -1,1548 +0,0 @@
-$!
-$! MAKEVMS.COM
-$! Original Author:  UNKNOWN
-$! Rewritten By:  Robert Byer
-$!                Vice-President
-$!                A-Com Computing, Inc.
-$!                byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$!	      Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB"
-$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
-$!
-$! This procedures accepts two command line options listed below.
-$!
-$! P1 specifies one of the following build options:
-$!
-$!      ALL       Just build "everything".
-$!      CONFIG    Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
-$!      BUILDINF  Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
-$!      SOFTLINKS Just fix the Unix soft links.
-$!      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$!      CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$!      CRYPTO/x  Just build the x part of the
-$!                "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$!      SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
-$!      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
-$!      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
-$!      ENGINES   Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
-$!
-$! P2, if defined, specifies the C pointer size.  Ignored on VAX.
-$!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
-$!      Supported values are:
-$!
-$!      ""       Compile with default (/NOPOINTER_SIZE).
-$!      32       Compile with /POINTER_SIZE=32 (SHORT).
-$!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
-$!               (Automatically select ARGV if compiler supports it.)
-$!      64=      Compile with /POINTER_SIZE=64 (LONG).
-$!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
-$!
-$! P3 specifies DEBUG or NODEBUG, to compile with or without debugging
-$!    information.
-$!
-$! P4 specifies which compiler to try to compile under.
-$!
-$!	  VAXC	 For VAX C.
-$!	  DECC	 For DEC C.
-$!	  GNUC	 For GNU C.
-$!	  LINK   To only link the programs from existing object files.
-$!               (not yet implemented)
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$!	UCX		for UCX or UCX emulation
-$!	TCPIP		for TCP/IP Services or TCP/IP Services emulation
-$!			(this is prefered over UCX)
-$!	SOCKETSHR	for SOCKETSHR+NETLIB
-$!	NONE		to avoid specifying which TCP/IP implementation to
-$!			use at build time (this works with DEC C).  This is
-$!			the default.
-$!
-$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up).
-$!
-$! P7, if defined, specifies a directory where ZLIB files (zlib.h,
-$! libz.olb) may be found.  Optionally, a non-default object library
-$! name may be included ("dev:[dir]libz_64.olb", for example).
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
-   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
-$ ON ERROR THEN GOTO TIDY
-$ ON CONTROL_C THEN GOTO TIDY
-$!
-$! Check if we're in a batch job, and make sure we get to 
-$! the directory this script is in
-$!
-$ IF F$MODE() .EQS. "BATCH"
-$ THEN
-$   COMNAME=F$ENVIRONMENT("PROCEDURE")
-$   COMPATH=F$PARSE("A.;",COMNAME) - "A.;"
-$   SET DEF 'COMPATH'
-$ ENDIF
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$!  The Architecture Is VAX.
-$!
-$   ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$ ARCHD = ARCH
-$ LIB32 = "32"
-$ POINTER_SIZE = ""
-$!
-$! Get VMS version.
-$!
-$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Check To See What We Are To Do.
-$!
-$ IF (BUILDCOMMAND.EQS."ALL")
-$ THEN
-$!
-$!  Start with building the OpenSSL configuration file.
-$!
-$   GOSUB CONFIG
-$!
-$!  Create The "BUILDINF.H" Include File.
-$!
-$   GOSUB BUILDINF
-$!
-$!  Fix The Unix Softlinks.
-$!
-$   GOSUB SOFTLINKS
-$!
-$ ENDIF
-$!
-$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
-$ THEN
-$!
-$!  Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!
-$   GOSUB CRYPTO
-$!
-$!  Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$   GOSUB SSL
-$!
-$!  Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
-$!
-$   GOSUB TEST
-$!
-$!  Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.
-$!
-$   GOSUB APPS
-$!
-$!  Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
-$!
-$   GOSUB ENGINES
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!    Build Just What The User Wants Us To Build.
-$!
-$     GOSUB 'BUILDCOMMAND'
-$!
-$ ENDIF
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
-$!
-$ CONFIG:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File."
-$!
-$! First, make sure the directory exists.
-$!
-$ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN -
-     CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD']
-$!
-$! Different tar/UnZip versions/option may have named the file differently
-$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
-$ THEN
-$   OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
-$ ELSE
-$   IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
-$   THEN
-$     OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
-$   ELSE
-$     ! For ODS-5
-$     IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
-$     THEN
-$       OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
-$     ELSE
-$       WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in.  Exiting!"
-$       $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
-$       GOTO TIDY
-$     ENDIF
-$   ENDIF
-$ ENDIF
-$!
-$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$! Make sure it has the right format.
-$!
-$ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H"
-$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
-RECORD
-        FORMAT stream_lf
-$ OPEN /APPEND H_FILE 'OSCH_NAME'
-$!
-$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
-$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
-$!
-$! Write a few macros that indicate how this system was built.
-$!
-$ WRITE H_FILE ""
-$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
-$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
-$ WRITE H_FILE "#endif"
-$
-$!
-$! Defined the full SDIRS here.  It will be pruned depending on configuration.
-$! This is an exact copy of what's found in Makefile.in, with spaces replaced
-$! with commas.
-$!
-$ SDIRS := -
-        objects,-
-        md2,md4,md5,sha,mdc2,hmac,ripemd,whrlpool,-
-        des,aes,rc2,rc4,rc5,idea,bf,cast,camellia,seed,modes,-
-        bn,ec,rsa,dsa,ecdsa,dh,ecdh,dso,engine,-
-        buffer,bio,stack,lhash,rand,err,-
-        evp,asn1,pem,x509,x509v3,conf,txt_db,pkcs7,pkcs12,comp,ocsp,ui,-
-        cms,pqueue,ts,jpake,srp,store,cmac
-$
-$! One of the best way to figure out what the list should be is to do
-$! the following on a Unix system:
-$!   grep OPENSSL_NO_ crypto/include/internal/*.h crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
-$! For that reason, the list will also always end up in alphabetical order
-$ CONFIG_LOGICALS := AES,-
-		     ASM,INLINE_ASM,-
-		     BF,-
-		     CAMELLIA,-
-		     CAST,-
-		     CMS,-
-		     COMP,-
-		     DEPRECATED,-
-		     DES,-
-		     DGRAM,-
-		     DH,-
-		     DSA,-
-		     EC,-
-		     EC2M,-
-		     ECDH,-
-		     ECDSA,-
-		     EC_NISTP_64_GCC_128,-
-		     ENGINE,-
-		     ERR,-
-		     GMP,-
-		     GOST,-
-		     HEARTBEATS,-
-		     HMAC,-
-		     IDEA,-
-		     JPAKE,-
-		     MD2,-
-		     MD4,-
-		     MD5,-
-		     MDC2,-
-		     NEXTPROTONEG,-
-		     OCB,-
-		     OCSP,-
-		     PSK,-
-		     RC2,-
-		     RC4,-
-		     RC5,-
-		     RFC3779,-
-		     RMD160,-
-		     RSA,-
-		     SCT,-
-                     SCRYPT,-
-		     SCTP,-
-		     SEED,-
-		     SOCK,-
-		     SRP,-
-		     SRTP,-
-		     SSL3_METHOD,-
-		     SSL_TRACE,-
-		     STATIC_ENGINE,-
-		     STDIO,-
-		     STORE,-
-		     UNIT_TEST,-
-		     WHIRLPOOL
-$ CONFIG_EXPERIMENTAL := JPAKE,-
-			 STORE
-$! The following rules, which dictate how some algorithm choices affect
-$! others, are picked from Configure.
-$! Quick syntax:
-$!  list = item[ ; list]
-$!  item = algos / dependents
-$!  algos = algo [, algos]
-$!  dependents = dependent [, dependents]
-$! When a list of algos is specified in one item, it means that they must
-$! all be disabled for the rule to apply.
-$! When a list of dependents is specified in one item, it means that they
-$! will all be disabled if the rule applies.
-$! Rules are checked sequentially.  If a rule disables an algorithm, it will
-$! affect all following rules that depend on that algorithm being disabled.
-$! To force something to be enabled or disabled, have no algorithms in the
-$! algos part.
-$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
-			  RMD160/RIPEMD;-
-			  DES/MDC2;-
-			  EC/ECDSA,ECDH;-
-			  MD5/SSL3,TLS1;-
-			  SHA/SSL3,TLS1;-
-			  RSA,DSA/SSL3,TLS1;-
-			  DH/SSL3,TLS1;-
-			  EC/GOST;-
-			  DSA/GOST;-
-			  DH/GOST;-
-			  /STATIC_ENGINE;-
-			  /DEPRECATED;-
-			  /EC_NISTP_64_GCC_128;-
-			  /GMP;-
-			  /MD2;-
-			  /RC5;-
-			  /RFC3779;-
-			  /SCTP;-
-			  /SSL_TRACE;-
-			  /UNIT_TEST
-$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
-			 /THREADS
-$
-$! Architecture specific rule addtions
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$   ! Disable algorithms that require 64-bit integers in C
-$   CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
-			   ";/GOST" + -
-			   ";/WHIRLPOOL"
-$ ENDIF
-$
-$! Keep track of things to remove from SDIRS, have the items surrounded
-$! with commas
-$ SKIP_SDIRS = ","
-$
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP11:
-$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$   CONFIG_LOG_I = CONFIG_LOG_I + 1
-$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP11
-$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP11_END
-$   IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
-$   THEN
-$       CONFIG_DISABLED_'CONFIG_LOG_E' := YES
-$       CONFIG_ENABLED_'CONFIG_LOG_E' := NO
-$	CONFIG_CHANGED_'CONFIG_LOG_E' := YES
-$	IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
-	    SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
-$   ELSE
-$       CONFIG_DISABLED_'CONFIG_LOG_E' := NO
-$       CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$	! Because all non-experimental algorithms are assumed
-$	! enabled by default
-$	CONFIG_CHANGED_'CONFIG_LOG_E' := NO
-$	IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
-	    SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
-$   ENDIF
-$   GOTO CONFIG_LOG_LOOP11
-$ CONFIG_LOG_LOOP11_END:
-$
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP12:
-$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_EXPERIMENTAL),"TRIM")
-$   CONFIG_LOG_I = CONFIG_LOG_I + 1
-$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP12
-$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP12_END
-$   IF F$TRNLNM("OPENSSL_EXPERIMENTAL_"+CONFIG_LOG_E)
-$   THEN
-$	CONFIG_DISABLED_'CONFIG_LOG_E' := NO
-$	CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$	CONFIG_CHANGED_'CONFIG_LOG_E' := YES
-$	IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
-	    SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
-$   ELSE
-$	CONFIG_DISABLED_'CONFIG_LOG_E' := YES
-$	CONFIG_ENABLED_'CONFIG_LOG_E' := NO
-$	! Because all experimental algorithms are assumed
-$	! disabled by default
-$	CONFIG_CHANGED_'CONFIG_LOG_E' := NO
-$	IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
-	    SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
-$   ENDIF
-$   GOTO CONFIG_LOG_LOOP12
-$ CONFIG_LOG_LOOP12_END:
-$
-$! Apply cascading disable rules
-$ CONFIG_DISABLE_I = 0
-$ CONFIG_DISABLE_LOOP0:
-$   CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", -
-     CONFIG_DISABLE_RULES),"TRIM")
-$   CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
-$   IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
-$   IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
-$
-$   CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
-$   CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
-$   TO_DISABLE := YES
-$   CONFIG_ALGO_I = 0
-$   CONFIG_DISABLE_LOOP1:
-$     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
-       CONFIG_DISABLE_ALGOS),"TRIM")
-$     CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
-$     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
-$     IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
-$     THEN
-$	TO_DISABLE := NO
-$     ELSE
-$	IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
-$     ENDIF
-$     GOTO CONFIG_DISABLE_LOOP1
-$   CONFIG_DISABLE_LOOP1_END:
-$
-$   IF TO_DISABLE
-$   THEN
-$     CONFIG_DEPENDENT_I = 0
-$     CONFIG_DISABLE_LOOP2:
-$	CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
-         CONFIG_DISABLE_DEPENDENTS),"TRIM")
-$	CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$	IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
-$	IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
-$       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
-$       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
-$	! Better not to assume defaults at this point...
-$	CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$	IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .EQS. SKIP_SDIRS THEN -
-	    SKIP_SDIRS = SKIP_SDIRS + CONFIG_DEPENDENT_E + ","
-$	WRITE SYS$ERROR -
-         "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
-$	GOTO CONFIG_DISABLE_LOOP2
-$     CONFIG_DISABLE_LOOP2_END:
-$   ENDIF
-$   GOTO CONFIG_DISABLE_LOOP0
-$ CONFIG_DISABLE_LOOP0_END:
-$	
-$! Apply cascading enable rules
-$ CONFIG_ENABLE_I = 0
-$ CONFIG_ENABLE_LOOP0:
-$   CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", -
-     CONFIG_ENABLE_RULES),"TRIM")
-$   CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
-$   IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
-$   IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
-$
-$   CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
-$   CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
-$   TO_ENABLE := YES
-$   CONFIG_ALGO_I = 0
-$   CONFIG_ENABLE_LOOP1:
-$     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
-       CONFIG_ENABLE_ALGOS),"TRIM")
-$     CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
-$     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
-$     IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
-$     THEN
-$	TO_ENABLE := NO
-$     ELSE
-$	IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
-$     ENDIF
-$     GOTO CONFIG_ENABLE_LOOP1
-$   CONFIG_ENABLE_LOOP1_END:
-$
-$   IF TO_ENABLE
-$   THEN
-$     CONFIG_DEPENDENT_I = 0
-$     CONFIG_ENABLE_LOOP2:
-$	CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
-         CONFIG_ENABLE_DEPENDENTS),"TRIM")
-$	CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$	IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
-$	IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
-$       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
-$       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
-$	! Better not to assume defaults at this point...
-$	CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$	IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .NES. SKIP_SDIRS THEN -
-	    SKIP_SDIRS = SKIP_SDIRS - (CONFIG_DEPENDENT_E + ",")
-$	WRITE SYS$ERROR -
-         "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
-$	GOTO CONFIG_ENABLE_LOOP2
-$     CONFIG_ENABLE_LOOP2_END:
-$   ENDIF
-$   GOTO CONFIG_ENABLE_LOOP0
-$ CONFIG_ENABLE_LOOP0_END:
-$
-$! Fix SDIRS
-$ SDIRS = ","+F$EDIT(SDIRS,"COLLAPSE")+","
-$ CONFIG_SKIP_I = 0
-$ CONFIG_SDIRS_LOOP1:
-$   CONFIG_SKIP_E = F$EDIT(F$ELEMENT(CONFIG_SKIP_I,",",SKIP_SDIRS),"TRIM")
-$   CONFIG_SKIP_I = CONFIG_SKIP_I + 1
-$   IF CONFIG_SKIP_E .EQS. "" THEN GOTO CONFIG_SDIRS_LOOP1
-$   IF CONFIG_SKIP_E .EQS. "," THEN GOTO CONFIG_SDIRS_LOOP1_END
-$   IF (SDIRS - (","+CONFIG_SKIP_E+",")) .NES. SDIRS THEN -
-       SDIRS = SDIRS - (CONFIG_SKIP_E+",")
-$   GOTO CONFIG_SDIRS_LOOP1
-$ CONFIG_SDIRS_LOOP1_END: 
-$ 
-$! Write to the configuration
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP2:
-$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$   CONFIG_LOG_I = CONFIG_LOG_I + 1
-$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
-$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
-$   IF CONFIG_DISABLED_'CONFIG_LOG_E'
-$   THEN
-$     WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
-$     WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$     WRITE H_FILE "#endif"
-$   ELSE
-$     IF CONFIG_CHANGED_'CONFIG_LOG_E'
-$     THEN
-$	WRITE H_FILE "#ifndef OPENSSL_EXPERIMENTAL_",CONFIG_LOG_E
-$	WRITE H_FILE "# ifndef OPENSSL_NO_",CONFIG_LOG_E
-$	WRITE H_FILE "#  define OPENSSL_NO_",CONFIG_LOG_E
-$	WRITE H_FILE "# endif"
-$	WRITE H_FILE "#endif"
-$
-$	IF F$TYPE(USER_CCDEFS) .NES. ""
-$	THEN
-$	  USER_CCDEFS = USER_CCDEFS + ",OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
-$       ELSE
-$	  USER_CCDEFS = "OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
-$       ENDIF
-$     ENDIF
-$   ENDIF
-$   GOTO CONFIG_LOG_LOOP2
-$ CONFIG_LOG_LOOP2_END:
-$
-$ WRITE/SYMBOL SYS$ERROR "SDIRS = """,SDIRS,""""
-$!
-$ WRITE H_FILE ""
-$ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
-$ WRITE H_FILE " * enable on newer systems / 2012-02-24 arpadffy */"
-$ WRITE H_FILE "#define OPENSSL_NO_SCTP"
-$ WRITE H_FILE ""
-$!
-$! Add in the common "crypto/opensslconf.h.in".
-$!
-$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
-$!
-$ IF ARCH .NES. "VAX"
-$ THEN
-$!
-$!  Write the non-VAX specific data
-$!
-$   WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$   WRITE H_FILE "#undef RC4_INT"
-$   WRITE H_FILE "#define RC4_INT unsigned int"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$   WRITE H_FILE "typedef unsigned int OSSL_DES_LONG;"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_BN_H)"
-$   WRITE H_FILE "#undef BN_LLONG"	! Never define with SIXTY_FOUR_BIT
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$   WRITE H_FILE "#define SIXTY_FOUR_BIT"
-$   WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$   WRITE H_FILE "#endif"
-$
-$   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$!  Else...
-$!
-$ ELSE
-$!
-$!  Write the VAX specific data
-$!
-$   WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$   WRITE H_FILE "#undef RC4_INT"
-$   WRITE H_FILE "#define RC4_INT unsigned char"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$   WRITE H_FILE "typedef unsigned int OSSL_DES_LONG;"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_BN_H)"
-$   WRITE H_FILE "#undef BN_LLONG"	! VAX C/DEC C doesn't have long long
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$   WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$   WRITE H_FILE "#define THIRTY_TWO_BIT"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$   WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$!  End
-$!
-$ ENDIF
-$!
-$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
-$!
-$ BUILDINF:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File."
-$!
-$! Create The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H"
-$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
-RECORD
-        FORMAT stream_lf
-$!
-$ OPEN /APPEND H_FILE 'bih_name'
-$!
-$! Get The Current Date & Time.
-$!
-$ TIME = F$TIME()
-$!
-$! Write The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ CFLAGS = ""
-$ if (POINTER_SIZE .nes. "")
-$ then
-$   CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'"
-$ endif
-$ if (ZLIB .nes. "")
-$ then
-$   if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " "
-$   CFLAGS = CFLAGS+ "/DEFINE=ZLIB"
-$ endif
-$! 
-$ WRITE H_FILE "#define CFLAGS ""''CFLAGS'"""
-$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'"""
-$ WRITE H_FILE "#define DATE ""''TIME'"" "
-$!
-$! Close The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H
-$!
-$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
-$!
-$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
-     DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Copy a lot of files around.
-$!
-$ SOFTLINKS: 
-$!
-$!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
-$!!!!
-$!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RD160.C' Files."
-$!!!!
-$!!! DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
-$!!!!
-$!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
-$!!!!
-$!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
-$!!!!
-$!!!! Copy MD5.C from [.CRYPTO.MD5] into [.APPS]
-$!!!! Tell The User We Are Rebuilding The [.include.openssl] Directory.
-$!!!!
-$!!!! Copy RMD160.C from [.CRYPTO.RIPEMD] into [.APPS]
-$!!!!
-$!!! COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS]
-$!
-$! Ensure that the [.include.openssl] directory contains a full set of
-$! real header files.  The distribution kit may have left real or fake
-$! symlinks there.  Rather than think about what's there, simply delete
-$! the destination files (fake or real symlinks) before copying the real
-$! header files in.  (Copying a real header file onto a real symlink
-$! merely duplicates the real header file at its source.)
-$!
-$! Tell The User We Are Rebuilding The [.include.openssl] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory."
-$!
-$! First, make sure the directory exists.  If it did exist, delete all
-$! the existing header files (or fake or real symlinks).
-$!
-$ if f$parse( "sys$disk:[.include.openssl]") .eqs. ""
-$ then
-$   create /directory sys$disk:[.include.openssl]
-$ else
-$   delete sys$disk:[.include.openssl]*.h;*
-$ endif
-$!
-$! Copy All The ".H" Files From The Main Directory.
-$!
-$ EXHEADER := e_os2.h
-$ copy 'exheader' sys$disk:[.include.openssl]
-$!
-$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
-$!
-$ HEADER_SDIRS := , -
-   'ARCHD', -
-   OBJECTS, -
-   MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
-   DES, AES, RC2, RC4, RC5, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
-   BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
-   BUFFER, BIO, STACK, LHASH, RAND, ERR, -
-   EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
-   COMP, OCSP, UI, -
-   CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC
-$!
-$ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
-$ EXHEADER_'ARCHD' := opensslconf.h
-$ EXHEADER_OBJECTS := objects.h, obj_mac.h
-$ EXHEADER_MD2 := md2.h
-$ EXHEADER_MD4 := md4.h
-$ EXHEADER_MD5 := md5.h
-$ EXHEADER_SHA := sha.h
-$ EXHEADER_MDC2 := mdc2.h
-$ EXHEADER_HMAC := hmac.h
-$ EXHEADER_RIPEMD := ripemd.h
-$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h
-$ EXHEADER_AES := aes.h
-$ EXHEADER_RC2 := rc2.h
-$ EXHEADER_RC4 := rc4.h
-$ EXHEADER_RC5 := rc5.h
-$ EXHEADER_IDEA := idea.h
-$ EXHEADER_BF := blowfish.h
-$ EXHEADER_CAST := cast.h
-$ EXHEADER_CAMELLIA := camellia.h
-$ EXHEADER_SEED := seed.h
-$ EXHEADER_MODES := modes.h
-$ EXHEADER_BN := bn.h
-$ EXHEADER_EC := ec.h
-$ EXHEADER_RSA := rsa.h
-$ EXHEADER_DSA := dsa.h
-$ EXHEADER_ECDSA := ecdsa.h
-$ EXHEADER_DH := dh.h
-$ EXHEADER_ECDH := ecdh.h
-$ EXHEADER_DSO := dso.h
-$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_BUFFER := buffer.h
-$ EXHEADER_BIO := bio.h
-$ EXHEADER_STACK := stack.h, safestack.h
-$ EXHEADER_LHASH := lhash.h
-$ EXHEADER_RAND := rand.h
-$ EXHEADER_ERR := err.h
-$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h
-$ EXHEADER_PEM := pem.h, pem2.h
-$ EXHEADER_X509 := x509.h, x509_vfy.h
-$ EXHEADER_X509V3 := x509v3.h
-$ EXHEADER_CONF := conf.h, conf_api.h
-$ EXHEADER_TXT_DB := txt_db.h
-$ EXHEADER_PKCS7 := pkcs7.h
-$ EXHEADER_PKCS12 := pkcs12.h
-$ EXHEADER_COMP := comp.h
-$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h
-$ EXHEADER_CMS := cms.h
-$ EXHEADER_PQUEUE := pqueue.h
-$ EXHEADER_TS := ts.h
-$ EXHEADER_JPAKE := jpake.h
-$ EXHEADER_SRP := srp.h
-$!!! EXHEADER_STORE := store.h, str_compat.h
-$ EXHEADER_STORE := store.h
-$ EXHEADER_CMAC := cmac.h
-$!
-$ i = 0
-$ loop_header_sdirs:
-$   sdir = f$edit( f$element( i, ",", header_sdirs), "trim")
-$   i = i + 1
-$   if (sdir .eqs. ",") then goto loop_header_sdirs_end
-$   hdr_list = exheader_'sdir'
-$   if (sdir .nes. "") then sdir = "."+ sdir
-$   copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
-$ goto loop_header_sdirs
-$ loop_header_sdirs_end:
-$!
-$! Copy All The ".H" Files From The [.SSL] Directory.
-$!
-$! (keep these in the same order as ssl/Makefile)
-$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, srtp.h
-$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
-$!
-$! Purge the [.include.openssl] header files.
-$!
-$ purge sys$disk:[.include.openssl]*.h
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library.
-$!
-$ CRYPTO:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
-   "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library."
-$!
-$! Go To The [.CRYPTO] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.CRYPTO]
-$!
-$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!  
-$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
-   "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library.
-$!
-$ SSL:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
-   "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library."
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
-   "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Test Programs.
-$!
-$ TEST:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities."
-$!
-$! Go To The [.TEST] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.TEST]
-$!
-$! Build The Test Programs.
-$!
-$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
-   "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ APPS:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications."
-$!
-$! Go To The [.APPS] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.APPS]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
-   "" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ ENGINES:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines."
-$!
-$! Go To The [.ENGINES] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.ENGINES]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
-   "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check if there's a "part", and separate it out
-$!
-$ BUILDPART = F$ELEMENT(1,"/",P1)
-$ IF BUILDPART .EQS. "/"
-$ THEN
-$   BUILDPART = ""
-$ ELSE
-$   P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)
-$ ENDIF
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."ALL")
-$ THEN
-$!
-$!   P1 Is ALL, So Build Everything.
-$!
-$    BUILDCOMMAND = "ALL"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  Else, Check To See If P1 Has A Valid Argument.
-$!
-$   IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
-       .OR.(P1.EQS."BUILDALL") -
-       .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
-       .OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
-       .OR.(P1.EQS."ENGINES")
-$   THEN
-$!
-$!    A Valid Argument.
-$!
-$     BUILDCOMMAND = P1
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Tell The User We Don't Know What They Want.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "USAGE:   @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG "
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Target ",P1," Is Invalid.  The Valid Target Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALL      :  Just Build Everything."
-$     WRITE SYS$OUTPUT "    CONFIG   :  Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
-$     WRITE SYS$OUTPUT "    BUILDINF :  Just build the [.CRYPTO._xxx]BUILDINF.H file."
-$     WRITE SYS$OUTPUT "    SOFTLINKS:  Just Fix The Unix soft links."
-$     WRITE SYS$OUTPUT "    BUILDALL :  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
-$     WRITE SYS$OUTPUT "    CRYPTO   :  To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$     WRITE SYS$OUTPUT "    CRYPTO/x :  To Build Just The x Part Of The"
-$     WRITE SYS$OUTPUT "                [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$     WRITE SYS$OUTPUT "    SSL      :  To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
-$     WRITE SYS$OUTPUT "    TEST     :  To Build Just The OpenSSL Test Programs."
-$     WRITE SYS$OUTPUT "    APPS     :  To Build Just The OpenSSL Application Programs."
-$     WRITE SYS$OUTPUT "    ENGINES  :  To Build Just The ENGINES"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALPHA[64]:  Alpha Architecture."
-$     WRITE SYS$OUTPUT "    IA64[64] :  IA64 Architecture."
-$     WRITE SYS$OUTPUT "    VAX      :  VAX Architecture."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     GOTO TIDY
-$!
-$!  End The Valid Argument Check.
-$!
-$   ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check P2 (POINTER_SIZE).
-$!
-$ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX")
-$ THEN
-$!
-$   IF (P2 .EQS. "32")
-$   THEN
-$     POINTER_SIZE = "32"
-$   ELSE
-$     POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE")
-$     IF ((POINTER_SIZE .EQS. "64") .OR. -
-       (POINTER_SIZE .EQS. "64=") .OR. -
-       (POINTER_SIZE .EQS. "64=ARGV"))
-$     THEN
-$       ARCHD = ARCH+ "_64"
-$       LIB32 = ""
-$     ELSE
-$!
-$!      Tell The User Entered An Invalid Option.
-$!
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "The Option ", P2, -
-         " Is Invalid.  The Valid Options Are:"
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT -
-         "    """"       :  Compile with default (short) pointers."
-$       WRITE SYS$OUTPUT -
-         "    32       :  Compile with 32-bit (short) pointers."
-$       WRITE SYS$OUTPUT -
-         "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
-$       WRITE SYS$OUT