clean away old VMS cruft

The old building scripts get removed, they are hopelessly gone in bit
rot by now.

Also remove the old symbol hacks.  They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.

Reviewed-by: Rich Salz <rsalz@openssl.org>

2 files changed, 0 insertions, 1624 deletions

diff --git a/crypto/crypto-lib.com b/crypto/crypto-lib.com
deleted file mode 100644
index 12b820432b..0000000000
--- a/crypto/crypto-lib.com
+++ /dev/null
@@ -1,1427 +0,0 @@
-$!
-$!  CRYPTO-LIB.COM
-$!  Written By:  Robert Byer
-$!               Vice-President
-$!               A-Com Computing, Inc.
-$!               byer@mail.all-net.net
-$!
-$!  Changes by Richard Levitte <richard@levitte.org>
-$!             Zoltan Arpadffy <arpadffy@polarhome.com>
-$!
-$!  This command files compiles and creates the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" 
-$!  library for OpenSSL.  The "xxx" denotes the machine architecture, ALPHA,
-$!  IA64 or VAX.
-$!
-$!  It was re-written so it would try to determine what "C" compiler to use 
-$!  or you can specify which "C" compiler to use.
-$!
-$!  Specify the following as P1 to build just that part or ALL to just
-$!  build everything.
-$!
-$!    	LIBRARY    To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!	ALL	   To do both LIBRARY and APPS
-$!
-$!  Specify DEBUG or NODEBUG as P2 to compile with or without debugger
-$!  information.
-$!
-$!  Specify which compiler at P3 to try to compile under.
-$!
-$!	VAXC	   For VAX C.
-$!	DECC	   For DEC C.
-$!	GNUC	   For GNU C.
-$!
-$!  If you don't specify a compiler, it will try to determine which
-$!  "C" compiler to use.
-$!
-$!  P4, if defined, sets a TCP/IP library to use, through one of the following
-$!  keywords:
-$!
-$!	UCX	   For UCX
-$!	TCPIP	   For TCPIP (post UCX)
-$!	SOCKETSHR  For SOCKETSHR+NETLIB
-$!
-$!  P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
-$!
-$!  P6, if defined, sets a choice of crypto methods to compile.
-$!  WARNING: this should only be done to recompile some part of an already
-$!  fully compiled library.
-$!
-$!  P7, if defined, specifies the C pointer size.  Ignored on VAX.
-$!      ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
-$!      Supported values are:
-$!
-$!      ""       Compile with default (/NOPOINTER_SIZE)
-$!      32       Compile with /POINTER_SIZE=32 (SHORT)
-$!      64       Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
-$!               (Automatically select ARGV if compiler supports it.)
-$!      64=      Compile with /POINTER_SIZE=64 (LONG).
-$!      64=ARGV  Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
-$!
-$!  P8, if defined, specifies a directory where ZLIB files (zlib.h,
-$!  libz.olb) may be found.  Optionally, a non-default object library
-$!  name may be included ("dev:[dir]libz_64.olb", for example).
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
-   f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$! Define A TCP/IP Library That We Will Need To Link To.
-$! (That Is, If We Need To Link To One.)
-$!
-$ TCPIP_LIB = ""
-$ ZLIB_LIB = ""
-$!
-$! Check Which Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$!  The Architecture Is VAX
-$!
-$   ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$ ARCHD = ARCH
-$ LIB32 = "32"
-$ OPT_FILE = ""
-$ POINTER_SIZE = ""
-$!
-$! Check if there's a SDIRS variable defined
-$!
-$ IF "''SDIRS'" .NES. ""
-$ THEN
-$!
-$!   If SDIRS was defined, define ENCRYPT_TYPES from it
-$!
-$     ENCRYPT_TYPES = "Basic,''SDIRS'"
-$!
-$! Otherwise
-$!
-$ ELSE
-$!
-$!   Define The Different Encryption Types.
-$!   NOTE: Some might think this list ugly.  However, it's made this way to
-$!   reflect the SDIRS variable in [-]Makefile.in as closely as possible,
-$!   thereby making it fairly easy to verify that the lists are the same.
-$!
-$   ET_WHIRLPOOL = "WHRLPOOL"
-$   IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
-$   ENCRYPT_TYPES = "Basic,"+ -
-		    "OBJECTS,"+ -
-		    "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
-		    "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
-		    "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
-		    "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
-		    "EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,"+ -
-		    "CMS,PQUEUE,TS,JPAKE,SRP,STORE,CMAC"
-$ ENDIF
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Define The OBJ and EXE Directories.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.CRYPTO]
-$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]
-$!
-$! Specify the destination directory in any /MAP option.
-$!
-$ if (LINKMAP .eqs. "MAP")
-$ then
-$   LINKMAP = LINKMAP+ "=''EXE_DIR'"
-$ endif
-$!
-$! Add the location prefix to the linker options file name.
-$!
-$ if (OPT_FILE .nes. "")
-$ then
-$   OPT_FILE = EXE_DIR+ OPT_FILE
-$ endif
-$!
-$! Initialise logical names and such
-$!
-$ GOSUB INITIALISE
-$!
-$! Tell The User What Kind of Machine We Run On.
-$!
-$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'"
-$!
-$!
-$! Check To See If The Architecture Specific OBJ Directory Exists.
-$!
-$ IF (F$PARSE(OBJ_DIR).EQS."")
-$ THEN
-$!
-$!  It Dosen't Exist, So Create It.
-$!
-$   CREATE/DIR 'OBJ_DIR'
-$!
-$! End The Architecture Specific OBJ Directory Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The Architecture Specific Directory Exists.
-$!
-$ IF (F$PARSE(EXE_DIR).EQS."")
-$ THEN
-$!
-$!  It Dosen't Exist, So Create It.
-$!
-$   CREATE/DIRECTORY 'EXE_DIR'
-$!
-$! End The Architecture Specific Directory Check.
-$!
-$ ENDIF
-$!
-$! Define The Library Name.
-$!
-$ LIB_NAME := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB
-$!
-$! Define The CRYPTO-LIB We Are To Use.
-$!
-$ CRYPTO_LIB := 'EXE_DIR'SSL_LIBCRYPTO'LIB32'.OLB
-$!
-$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library...
-$!
-$ IF (F$SEARCH(LIB_NAME).EQS."")
-$ THEN
-$!
-$! Guess Not, Create The Library.
-$!
-$   LIBRARY/CREATE/OBJECT 'LIB_NAME'
-$!
-$! End The Library Check.
-$!
-$ ENDIF
-$!
-$! Build our options file for the application
-$!
-$ GOSUB CHECK_OPT_FILE
-$!
-$! Define The Different Encryption "library" Strings.
-$!
-$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,"+ -
-	"ebcdic,uid,o_time,o_str,o_dir,thr_id,lock,"+ -
-	"o_init,o_fips"
-$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
-$ LIB_MD2 = "md2_dgst,md2_one"
-$ LIB_MD4 = "md4_dgst,md4_one"
-$ LIB_MD5 = "md5_dgst,md5_one"
-$ LIB_SHA = "sha1dgst,sha1_one,sha256,sha512"
-$ LIB_MDC2 = "mdc2dgst,mdc2_one"
-$ LIB_HMAC = "hmac,hm_ameth,hm_pmeth"
-$ LIB_RIPEMD = "rmd_dgst,rmd_one"
-$ LIB_WHRLPOOL = "wp_dgst,wp_block"
-$ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ -
-	"ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ -
-	"enc_read,enc_writ,ofb64enc,"+ -
-	"ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ -
-	"des_enc,fcrypt_b,"+ -
-	"fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
-	"read2pwd"
-$ LIB_AES = "aes_misc,aes_ecb,aes_cfb,aes_ofb,aes_ige,aes_wrap,"+ -
-	"aes_core,aes_cbc"
-$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
-$ LIB_RC4 = "rc4_enc,rc4_skey"
-$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
-$ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey"
-$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
-$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
-$ LIB_CAMELLIA = "cmll_ecb,cmll_ofb,cmll_cfb,cmll_ctr,camellia,cmll_misc,cmll_cbc"
-$ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
-$ LIB_MODES = "cbc128,ctr128,cts128,cfb128,ofb128,gcm128,"+ -
-	"ccm128,xts128,wrap128,ocb128"
-$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
-$ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN -
-     LIB_BN_ASM = "bn_asm"
-$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ -
-	"bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ -
-	"bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ -
-	"bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ -
-	"bn_depr,bn_const,bn_x931p,bn_intern,bn_dh,bn_srp"
-$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ -
-	"ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ -
-	"ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn,"+ -
-	"ecp_nistp224,ecp_nistp256,ecp_nistp521,ecp_nistputil,"+ -
-	"ecp_oct,ec2_oct,ec_oct"
-$ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ -
-	"rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ -
-	"rsa_pss,rsa_x931,rsa_asn1,rsa_depr,rsa_ameth,rsa_prn,"+ -
-	"rsa_pmeth,rsa_crpt,rsa_x931g"
-$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,"+ -
-	"dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn"
-$ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err"
-$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ -
-	"dh_ameth,dh_pmeth,dh_prn,dh_rfc5114,dh_kdf"
-$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err,ech_kdf"
-$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
-	"dso_openssl,dso_win32,dso_vms"
-$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
-	"eng_table,eng_pkey,eng_fat,eng_all,"+ -
-	"tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ -
-	"tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ -
-	"eng_openssl,eng_cnf,eng_dyn,eng_cryptodev,"+ -
-	"eng_rdrand"
-$ LIB_BUFFER = "buffer,buf_str,buf_err"
-$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
-	"bss_mem,bss_null,bss_fd,"+ -
-	"bss_file,bss_sock,bss_conn,"+ -
-	"bf_null,bf_buff,b_print,b_dump,"+ -
-	"b_sock,bss_acpt,bf_nbio,bss_log,bss_bio,"+ -
-	"bss_dgram,"+ -
-	"bf_lbuf"	! The last one is VMS specific
-$ LIB_STACK = "stack"
-$ LIB_LHASH = "lhash,lh_stats"
-$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
-	"rand_win,rand_unix,rand_vms,rand_os2,rand_nw"
-$ LIB_ERR = "err,err_all,err_prn"
-$ LIB_EVP_1 = "encode,digest,evp_enc,evp_key,evp_acnf,evp_cnf,"+ -
-	"e_des,e_bf,e_idea,e_des3,e_camellia,"+ -
-	"e_rc4,e_aes,names,e_seed,"+ -
-	"e_xcbc_d,e_rc2,e_cast,e_rc5"
-$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha1,m_wp," + -
-	"m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
-	"p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ -
-	"bio_md,bio_b64,bio_enc,evp_err,e_null,"+ -
-	"c_all,c_allc,c_alld,evp_lib,bio_ok,"+-
-	"evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
-$ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn,m_sigver,"+ -
-	"e_aes_cbc_hmac_sha1,e_aes_cbc_hmac_sha256,e_rc4_hmac_md5"
-$ LIB_ASN1_1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
-	"a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ -
-	"a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ -
-	"x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ -
-	"x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ -
-	"d2i_pu,d2i_pr,i2d_pu,i2d_pr"
-$ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ -
-	"tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ -
-	"tasn_prn,tasn_scn,ameth_lib,"+ -
-	"f_int,f_string,n_pkey,"+ -
-	"f_enum,x_pkey,a_bool,x_exten,bio_asn1,bio_ndef,asn_mime,"+ -
-	"asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ -
-	"evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid,"+ -
-	"asn_mstbl"
-$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ -
-	"pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt"
-$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ -
-	"x509_obj,x509_req,x509spki,x509_vfy,"+ -
-	"x509_set,x509cset,x509rset,x509_err,"+ -
-	"x509name,x509_v3,x509_ext,x509_att,"+ -
-	"x509type,x509_lu,x_all,x509_txt,"+ -
-	"x509_trs,by_file,by_dir,x509_vpm"
-$ LIB_X509V3 = "v3_bcons,v3_bitst,v3_conf,v3_extku,v3_ia5,v3_lib,"+ -
-	"v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ -
-	"v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ -
-	"v3_akeya,v3_pmaps,v3_pcons,v3_ncons,v3_pcia,v3_pci,"+ -
-	"pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib,"+ -
-	"v3_asid,v3_addr,v3_scts"
-$ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall,conf_sap"
-$ LIB_TXT_DB = "txt_db"
-$ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ -
-	"pk7_mime,bio_pk7"
-$ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ -
-	"p12_init,p12_key,p12_kiss,p12_mutl,"+ -
-	"p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e"
-$ LIB_COMP = "comp_lib,comp_err,"+ -
-	"c_zlib"
-$ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ -
-	"ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err,v3_ocsp"
-$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"
-$ LIB_CMS = "cms_lib,cms_asn1,cms_att,cms_io,cms_smime,cms_err,"+ -
-	"cms_sd,cms_dd,cms_cd,cms_env,cms_enc,cms_ess,"+ -
-	"cms_pwri,cms_kari"
-$ LIB_PQUEUE = "pqueue"
-$ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ -
-	"ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ -
-	"ts_asn1"
-$ LIB_JPAKE = "jpake,jpake_err"
-$ LIB_SRP = "srp_lib,srp_vfy"
-$ LIB_STORE = "str_err,str_lib,str_meth,str_mem"
-$ LIB_CMAC = "cmac,cm_ameth,cm_pmeth"
-$!
-$! Setup exceptional compilations
-$!
-$ CC3_SHOWN = 0
-$ CC4_SHOWN = 0
-$ CC5_SHOWN = 0
-$ CC6_SHOWN = 0
-$!
-$! The following lists must have leading and trailing commas, and no
-$! embedded spaces.  (They are scanned for ",name,".)
-$!
-$ ! Add definitions for no threads on OpenVMS 7.1 and higher.
-$ COMPILEWITH_CC3 = ",bss_rtcp,"
-$ ! Disable the DOLLARID warning.  Not needed with /STANDARD=RELAXED.
-$ COMPILEWITH_CC4 = "" !!! ",a_utctm,bss_log,o_time,o_dir,"
-$ ! Disable disjoint optimization on VAX with DECC.
-$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + -
-                    "seed,sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
-$ ! Disable the MIXLINKAGE warning.
-$ COMPILEWITH_CC6 = "" !!! ",enc_read,set_key,"
-$!
-$! Figure Out What Other Modules We Are To Build.
-$!
-$ BUILD_SET:
-$!
-$! Define A Module Counter.
-$!
-$ MODULE_COUNTER = 0
-$!
-$! Top Of The Loop.
-$!
-$ MODULE_NEXT:
-$!
-$! Extract The Module Name From The Encryption List.
-$!
-$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES)
-$!
-$! Check To See If We Are At The End Of The Module List.
-$!
-$ IF (MODULE_NAME.EQS.",") 
-$ THEN 
-$!
-$!  We Are At The End Of The Module List, Go To MODULE_DONE.
-$!
-$   GOTO MODULE_DONE
-$!
-$! End The Module List Check.
-$!
-$ ENDIF
-$!
-$! Increment The Moudle Counter.
-$!
-$ MODULE_COUNTER = MODULE_COUNTER + 1
-$
-$ IF MODULE_NAME.EQS."" THEN GOTO MODULE_NEXT
-$ MODULE_NAME1 = MODULE_NAME
-$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
-$!
-$! Check if the library module name actually is defined
-$!
-$ PART_COUNTER = -1
-$ IF F$TYPE(LIB_'MODULE_NAME'_1) .NES. ""
-$ THEN
-$   PART_COUNTER = 1
-$ ELSE
-$   IF F$TYPE(LIB_'MODULE_NAME') .EQS. ""
-$   THEN
-$     WRITE SYS$ERROR ""
-$     WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist.  Continuing..."
-$     WRITE SYS$ERROR ""
-$     GOTO MODULE_NEXT
-$   ENDIF
-$ ENDIF
-$!
-$! Tell The User What Module We Are Building.
-$!
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,")"
-$!
-$! Create The Library Module Names.
-$!
-$ PART_NEXT:
-$ IF PART_COUNTER .EQ. 0 THEN GOTO MODULE_NEXT
-$
-$ IF PART_COUNTER .LT. 0
-$ THEN
-$   LIB_MODULE = "LIB_" + MODULE_NAME
-$ ELSE
-$   LIB_MODULE = "LIB_" + MODULE_NAME + "_''PART_COUNTER'"
-$ ENDIF
-$!
-$! If there are no more parts, go to the next module
-$!
-$ IF F$TYPE('LIB_MODULE') .EQS. "" THEN GOTO MODULE_NEXT
-$!
-$! Increment The Counter.
-$!
-$ PART_COUNTER = PART_COUNTER + 1
-$!
-$!  Define A File Counter And Set It To "0".
-$!
-$ FILE_COUNTER = 0
-$!
-$! Top Of The File Loop.
-$!
-$ NEXT_FILE:
-$!
-$! Extract The File Name From The File List.
-$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
-$!
-$! Check To See If We Are At The End Of The File List.
-$!
-$ IF (FILE_NAME.EQS.",") 
-$ THEN 
-$!
-$!  We Are At The End Of The File List, Goto FILE_DONE.
-$!
-$   GOTO FILE_DONE
-$!
-$! End The File List Check.
-$!
-$ ENDIF
-$!
-$! Increment The Counter.
-$!
-$ FILE_COUNTER = FILE_COUNTER + 1
-$!
-$! Create The Source File Name.
-$!
-$ TMP_FILE_NAME = F$ELEMENT(1,"]",FILE_NAME)
-$ IF TMP_FILE_NAME .EQS. "]" THEN TMP_FILE_NAME = FILE_NAME
-$ IF F$ELEMENT(0,".",TMP_FILE_NAME) .EQS. TMP_FILE_NAME THEN -
-	FILE_NAME = FILE_NAME + ".c"
-$ IF (MODULE_NAME.NES."")
-$ THEN
-$   SOURCE_FILE = "SYS$DISK:[." + MODULE_NAME+ "]" + FILE_NAME
-$ ELSE
-$   SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME
-$ ENDIF
-$ SOURCE_FILE = SOURCE_FILE - "]["
-$!
-$! Create The Object File Name.
-$!
-$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
-$ ON WARNING THEN GOTO NEXT_FILE
-$!
-$! Check To See If The File We Want To Compile Is Actually There.
-$!
-$ IF (F$SEARCH(SOURCE_FILE).EQS."")
-$ THEN
-$!
-$!  Tell The User That The File Doesn't Exist.
-$!
-$   WRITE SYS$OUTPUT ""
-$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
-$   WRITE SYS$OUTPUT ""
-$!
-$!  Exit The Build.
-$!
-$   GOTO EXIT
-$!
-$! End The File Exist Check.
-$!
-$ ENDIF
-$!
-$! Tell The User We Are Compiling The File.
-$!
-$ WRITE SYS$OUTPUT "        ",FILE_NAME,""
-$!
-$! Compile The File.
-$!
-$ ON ERROR THEN GOTO NEXT_FILE
-$ FILE_NAME0 = ","+ F$ELEMENT(0,".",FILE_NAME)+ ","
-$ IF FILE_NAME - ".mar" .NES. FILE_NAME
-$ THEN
-$   MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$   IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3
-$   THEN
-$     write sys$output "        \Using special rule (3)"
-$     if (.not. CC3_SHOWN)
-$     then
-$       CC3_SHOWN = 1
-$       x = "    "+ CC3
-$       write /symbol sys$output x
-$     endif
-$     CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$   ELSE
-$     IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4
-$     THEN
-$       write /symbol sys$output "        \Using special rule (4)"
-$       if (.not. CC4_SHOWN)
-$       then
-$         CC4_SHOWN = 1
-$         x = "    "+ CC4
-$         write /symbol sys$output x
-$       endif
-$       CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$     ELSE
-$       IF CC5_DIFFERENT .AND. -
-         (COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5)
-$       THEN
-$         write sys$output "        \Using special rule (5)"
-$         if (.not. CC5_SHOWN)
-$         then
-$           CC5_SHOWN = 1
-$           x = "    "+ CC5
-$           write /symbol sys$output x
-$         endif
-$         CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$       ELSE
-$         IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6
-$         THEN
-$           write sys$output "        \Using special rule (6)"
-$           if (.not. CC6_SHOWN)
-$           then
-$             CC6_SHOWN = 1
-$             x = "    "+ CC6
-$             write /symbol sys$output x
-$           endif
-$           CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$         ELSE
-$           CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$         ENDIF
-$       ENDIF
-$     ENDIF
-$   ENDIF
-$ ENDIF
-$!
-$! Add It To The Library.
-$!
-$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
-$!
-$! Time To Clean Up The Object File.
-$!
-$ DELETE 'OBJECT_FILE';*
-$!
-$! Go Back And Do It Again.
-$!
-$ GOTO NEXT_FILE
-$!
-$! All Done With This Library Part.
-$!
-$ FILE_DONE:
-$!
-$! Go Back And Get The Next Part.
-$!
-$ GOTO PART_NEXT
-$!
-$! All Done With This Module.
-$!
-$ MODULE_DONE:
-$!
-$! Tell The User That We Are All Done.
-$!
-$ WRITE SYS$OUTPUT "All Done..."
-$ EXIT:
-$ GOSUB CLEANUP
-$ EXIT
-$!
-$! Check For The Link Option FIle.
-$!
-$ CHECK_OPT_FILE:
-$!
-$! Check To See If We Need To Make A VAX C Option File.
-$!
-$ IF (COMPILER.EQS."VAXC")
-$ THEN
-$!
-$!  Check To See If We Already Have A VAX C Linker Option File.
-$!
-$   IF (F$SEARCH(OPT_FILE).EQS."")
-$   THEN
-$!
-$!    We Need A VAX C Linker Option File.
-$!
-$     CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against 
-! The Sharable VAX C Runtime Library.
-!
-SYS$SHARE:VAXCRTL.EXE/SHARE
-$EOD
-$!
-$!  End The Option File Check.
-$!
-$   ENDIF
-$!
-$! End The VAXC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A GNU C Option File.
-$!
-$ IF (COMPILER.EQS."GNUC")
-$ THEN
-$!
-$!  Check To See If We Already Have A GNU C Linker Option File.
-$!
-$   IF (F$SEARCH(OPT_FILE).EQS."")
-$   THEN
-$!
-$!    We Need A GNU C Linker Option File.
-$!
-$     CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against 
-! The Sharable C Runtime Library.
-!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
-$EOD
-$!
-$!  End The Option File Check.
-$!
-$   ENDIF
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A DEC C Option File.
-$!
-$ IF (COMPILER.EQS."DECC")
-$ THEN
-$!
-$!  Check To See If We Already Have A DEC C Linker Option File.
-$!
-$   IF (F$SEARCH(OPT_FILE).EQS."")
-$   THEN
-$!
-$!    Figure Out If We Need A non-VAX Or A VAX Linker Option File.
-$!
-$     IF ARCH .EQS. "VAX"
-$     THEN
-$!
-$!      We Need A DEC C Linker Option File For VAX.
-$!
-$       CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Against 
-! The Sharable DEC C Runtime Library.
-!
-SYS$SHARE:DECC$SHR.EXE/SHARE
-$EOD
-$!
-$!    Else...
-$!
-$     ELSE
-$!
-$!      Create The non-VAX Linker Option File.
-$!
-$       CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File For non-VAX To Link Against 
-! The Sharable C Runtime Library.
-!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
-$EOD
-$!
-$!    End The DEC C Option File Check.
-$!
-$     ENDIF
-$!
-$!  End The Option File Search.
-$!
-$   ENDIF
-$!
-$! End The DEC C Check.
-$!
-$ ENDIF
-$!
-$!  Tell The User What Linker Option File We Are Using.
-$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."ALL")
-$ THEN
-$!
-$!   P1 Is Blank, So Build Everything.
-$!
-$    BUILDALL = "TRUE"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  Else, Check To See If P1 Has A Valid Argument.
-$!
-$   IF (P1.EQS."LIBRARY")
-$   THEN
-$!
-$!    A Valid Argument.
-$!
-$     BUILDALL = P1
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Tell The User We Don't Know What They Want.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P1," Is Invalid.  The Valid Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALL      :  Just Build Everything."
-$     WRITE SYS$OUTPUT "    LIBRARY  :  To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALPHA[64]:  Alpha Architecture."
-$     WRITE SYS$OUTPUT "    IA64[64] :  IA64 Architecture."
-$     WRITE SYS$OUTPUT "    VAX      :  VAX Architecture."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     EXIT
-$!
-$!  End The Valid Argument Check.
-$!
-$   ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P2 Is Blank.
-$!
-$ IF (P2.EQS."NODEBUG")
-$ THEN
-$!
-$!  P2 Is NODEBUG, So Compile Without The Debugger Information.
-$!
-$   DEBUGGER = "NODEBUG"
-$   LINKMAP = "NOMAP"
-$   TRACEBACK = "NOTRACEBACK" 
-$   GCC_OPTIMIZE = "OPTIMIZE"
-$   CC_OPTIMIZE = "OPTIMIZE"
-$   MACRO_OPTIMIZE = "OPTIMIZE"
-$   WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$   WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
-$ ELSE
-$!
-$!  Check To See If We Are To Compile With Debugger Information.
-$!
-$   IF (P2.EQS."DEBUG")
-$   THEN
-$!
-$!    Compile With Debugger Information.
-$!
-$     DEBUGGER = "DEBUG"
-$     LINKMAP = "MAP"
-$     TRACEBACK = "TRACEBACK"
-$     GCC_OPTIMIZE = "NOOPTIMIZE"
-$     CC_OPTIMIZE = "NOOPTIMIZE"
-$     MACRO_OPTIMIZE = "NOOPTIMIZE"
-$     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
-$     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
-$   ELSE 
-$!
-$!    They Entered An Invalid Option.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "     DEBUG   :  Compile With The Debugger Information."
-$     WRITE SYS$OUTPUT "     NODEBUG :  Compile Without The Debugger Information."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     EXIT
-$!
-$!  End The Valid Argument Check.
-$!
-$   ENDIF
-$!
-$! End The P2 Check.
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By:  Richard Levitte
-$!              richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P5.
-$!
-$ IF (P5.EQS."")
-$ THEN
-$!
-$!  Get The Version Of VMS We Are Using.
-$!
-$   ISSEVEN :=
-$   TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
-$   TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$!  Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$   IF (TMP.GE.71)
-$   THEN
-$!
-$!    We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$     ISSEVEN := ,PTHREAD_USE_D4
-$!
-$!  End The VMS Version Check.
-$!
-$   ENDIF
-$!
-$! End The P5 Check.
-$!
-$ ENDIF
-$!
-$! Check P7 (POINTER_SIZE).
-$!
-$ IF (P7 .NES. "") .AND. (ARCH .NES. "VAX")
-$ THEN
-$!
-$   IF (P7 .EQS. "32")
-$   THEN
-$     POINTER_SIZE = " /POINTER_SIZE=32"
-$   ELSE
-$     POINTER_SIZE = F$EDIT( P7, "COLLAPSE, UPCASE")
-$     IF ((POINTER_SIZE .EQS. "64") .OR. -
-       (POINTER_SIZE .EQS. "64=") .OR. -
-       (POINTER_SIZE .EQS. "64=ARGV"))
-$     THEN
-$       ARCHD = ARCH+ "_64"
-$       LIB32 = ""
-$       POINTER_SIZE = " /POINTER_SIZE=64"
-$     ELSE
-$!
-$!      Tell The User Entered An Invalid Option.
-$!
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "The Option ", P7, -
-         " Is Invalid.  The Valid Options Are:"
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT -
-         "    """"       :  Compile with default (short) pointers."
-$       WRITE SYS$OUTPUT -
-         "    32       :  Compile with 32-bit (short) pointers."
-$       WRITE SYS$OUTPUT -
-         "    64       :  Compile with 64-bit (long) pointers (auto ARGV)."
-$       WRITE SYS$OUTPUT -
-         "    64=      :  Compile with 64-bit (long) pointers (no ARGV)."
-$       WRITE SYS$OUTPUT -
-         "    64=ARGV  :  Compile with 64-bit (long) pointers (ARGV)."
-$       WRITE SYS$OUTPUT ""
-$! 
-$!      Time To EXIT.
-$!
-$       EXIT
-$!
-$     ENDIF
-$!
-$   ENDIF
-$!
-$! End The P7 (POINTER_SIZE) Check.
-$!
-$ ENDIF
-$!
-$! Set basic C compiler /INCLUDE directories.
-$!
-$ CC_INCLUDES = "SYS$DISK:[.''ARCHD'],SYS$DISK:[],SYS$DISK:[-],"+ -
-   "SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1],"+ -
-   "SYS$DISK:[.MODES]"
-$!
-$! Check To See If P3 Is Blank.
-$!
-$ IF (P3.EQS."")
-$ THEN
-$!
-$!  O.K., The User Didn't Specify A Compiler, Let's Try To
-$!  Find Out Which One To Use.
-$!
-$!  Check To See If We Have GNU C.
-$!
-$   IF (F$TRNLNM("GNU_CC").NES."")
-$   THEN
-$!
-$!    Looks Like GNUC, Set To Use GNUC.
-$!
-$     P3 = "GNUC"
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Check To See If We Have VAXC Or DECC.
-$!
-$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
-$     THEN 
-$!
-$!      Looks Like DECC, Set To Use DECC.
-$!
-$       P3 = "DECC"
-$!
-$!    Else...
-$!
-$     ELSE
-$!
-$!      Looks Like VAXC, Set To Use VAXC.
-$!
-$       P3 = "VAXC"
-$!
-$!    End The VAXC Compiler Check.
-$!
-$     ENDIF
-$!
-$!  End The DECC & VAXC Compiler Check.
-$!
-$   ENDIF
-$!
-$!  End The Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have A Option For P4.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$!  Find out what socket library we have available
-$!
-$   IF F$PARSE("SOCKETSHR:") .NES. ""
-$   THEN
-$!
-$!    We have SOCKETSHR, and it is my opinion that it's the best to use.
-$!
-$     P4 = "SOCKETSHR"
-$!
-$!    Tell the user
-$!
-$     WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$!    Else, let's look for something else
-$!
-$   ELSE
-$!
-$!    Like UCX (the reason to do this before Multinet is that the UCX
-$!    emulation is easier to use...)
-$!
-$     IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
-	 .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
-	 .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
-$     THEN
-$!
-$!	Last resort: a UCX or UCX-compatible library
-$!
-$	P4 = "UCX"
-$!
-$!      Tell the user
-$!
-$       WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$!	That was all...
-$!
-$     ENDIF
-$   ENDIF
-$ ENDIF
-$!
-$! Set Up Initial CC Definitions, Possibly With User Ones
-$!
-$ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS"
-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
-$ CCEXTRAFLAGS = ""
-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
-	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
-$!
-$! Check To See If We Have A ZLIB Option.
-$!
-$ ZLIB = P8
-$ IF (ZLIB .NES. "")
-$ THEN
-$!
-$!  Check for expected ZLIB files.
-$!
-$   err = 0
-$   file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
-$   if (f$search( file1) .eqs. "")
-$   then
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$     WRITE SYS$OUTPUT "    Can't find header: ''file1'"
-$     err = 1
-$   endif
-$   file1 = f$parse( "A.;", ZLIB)- "A.;"
-$!
-$   file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
-$   if (f$search( file2) .eqs. "")
-$   then
-$     if (err .eq. 0)
-$     then
-$       WRITE SYS$OUTPUT ""
-$       WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$     endif
-$     WRITE SYS$OUTPUT "    Can't find library: ''file2'"
-$     WRITE SYS$OUTPUT ""
-$     err = err+ 2
-$   endif
-$   if (err .eq. 1)
-$   then
-$     WRITE SYS$OUTPUT ""
-$   endif
-$!
-$   if (err .ne. 0)
-$   then
-$     EXIT
-$   endif
-$!
-$   CCDEFS = """ZLIB=1"", "+ CCDEFS
-$   CC_INCLUDES = CC_INCLUDES+ ", "+ file1
-$   ZLIB_LIB = ", ''file2' /library"
-$!
-$!  Print info
-$!
-$   WRITE SYS$OUTPUT "ZLIB library spec: ", file2
-$!
-$! End The ZLIB Check.
-$!
-$ ENDIF
-$!
-$!  Check To See If The User Entered A Valid Parameter.
-$!
-$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
-$ THEN
-$!
-$!    Check To See If The User Wanted DECC.
-$!
-$   IF (P3.EQS."DECC")
-$   THEN
-$!
-$!    Looks Like DECC, Set To Use DECC.
-$!
-$     COMPILER = "DECC"
-$!
-$!    Tell The User We Are Using DECC.
-$!
-$     WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$!    Use DECC...
-$!
-$     CC = "CC"
-$     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
-	 THEN CC = "CC/DECC"
-$     CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ -
-       "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + -
-       " /INCLUDE=(''CC_INCLUDES')"+ -
-       CCEXTRAFLAGS
-$!
-$!    Define The Linker Options File Name.
-$!
-$     OPT_FILE = "VAX_DECC_OPTIONS.OPT"
-$!
-$!  End DECC Check.
-$!
-$   ENDIF
-$!
-$!  Check To See If We Are To Use VAXC.
-$!
-$   IF (P3.EQS."VAXC")
-$   THEN
-$!
-$!    Looks Like VAXC, Set To Use VAXC.
-$!
-$     COMPILER = "VAXC"
-$!
-$!    Tell The User We Are Using VAX C.
-$!
-$     WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$!    Compile Using VAXC.
-$!
-$     CC = "CC"