Conversion to UTF-8 where needed

This leaves behind files with names ending with '.iso-8859-1'.  These
should be safe to remove.  If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.

Reviewed-by: Rich Salz <rsalz@openssl.org>

7 files changed, 37 insertions, 37 deletions

diff --git a/crypto/modes/asm/ghash-armv4.pl b/crypto/modes/asm/ghash-armv4.pl
index 7311ad2966..2d225cf6d8 100644
--- a/crypto/modes/asm/ghash-armv4.pl
+++ b/crypto/modes/asm/ghash-armv4.pl
@@ -45,7 +45,7 @@
 # processes one byte in 8.45 cycles, A9 - in 10.2, A15 - in 7.63,
 # Snapdragon S4 - in 9.33.
 #
-# Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software
+# Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software
 # Polynomial Multiplication on ARM Processors using the NEON Engine.
 # 
 # http://conradoplg.cryptoland.net/files/2010/12/mocrysen13.pdf
@@ -449,12 +449,12 @@ gcm_ghash_neon:
 	veor		$IN,$Xl			@ inp^=Xi
 .Lgmult_neon:
 ___
-	&clmul64x64	($Xl,$Hlo,"$IN#lo");	# H.lo·Xi.lo
+	&clmul64x64	($Xl,$Hlo,"$IN#lo");	# H.lo·Xi.lo
 $code.=<<___;
 	veor		$IN#lo,$IN#lo,$IN#hi	@ Karatsuba pre-processing
 ___
-	&clmul64x64	($Xm,$Hhl,"$IN#lo");	# (H.lo+H.hi)·(Xi.lo+Xi.hi)
-	&clmul64x64	($Xh,$Hhi,"$IN#hi");	# H.hi·Xi.hi
+	&clmul64x64	($Xm,$Hhl,"$IN#lo");	# (H.lo+H.hi)·(Xi.lo+Xi.hi)
+	&clmul64x64	($Xh,$Hhi,"$IN#hi");	# H.hi·Xi.hi
 $code.=<<___;
 	veor		$Xm,$Xm,$Xl		@ Karatsuba post-processing
 	veor		$Xm,$Xm,$Xh
diff --git a/crypto/modes/asm/ghash-c64xplus.pl b/crypto/modes/asm/ghash-c64xplus.pl
index a465b4236c..93f6985211 100644
--- a/crypto/modes/asm/ghash-c64xplus.pl
+++ b/crypto/modes/asm/ghash-c64xplus.pl
@@ -153,7 +153,7 @@ ___
 #    8/2                                         S1  L1x S2      |        ....
 #####...                                         ................|............
 $code.=<<___;
-	XORMPY	$H0,$xia,$H0x		; 0	; H·(Xi[i]<<1)
+	XORMPY	$H0,$xia,$H0x		; 0	; H·(Xi[i]<<1)
 ||	XORMPY	$H01u,$xib,$H01y
 || [A0]	LDBU	*--${xip},$x0
 	XORMPY	$H1,$xia,$H1x		; 1
@@ -162,7 +162,7 @@ $code.=<<___;
 	XORMPY	$H3,$xia,$H3x		; 3
 ||	XORMPY	$H3u,$xib,$H3y
 ||[!A0]	MVK.D	15,A0				; *--${xip} counter
-	XOR.L	$H0x,$Z0,$Z0		; 4	; Z^=H·(Xi[i]<<1)
+	XOR.L	$H0x,$Z0,$Z0		; 4	; Z^=H·(Xi[i]<<1)
 || [A0]	SUB.S	A0,1,A0
 	XOR.L	$H1x,$Z1,$Z1		; 5
 ||	AND.D	$H01y,$FF000000,$H0z
diff --git a/crypto/modes/asm/ghash-sparcv9.pl b/crypto/modes/asm/ghash-sparcv9.pl
index c1074ed35c..e928c42cd7 100644
--- a/crypto/modes/asm/ghash-sparcv9.pl
+++ b/crypto/modes/asm/ghash-sparcv9.pl
@@ -379,7 +379,7 @@ gcm_init_vis3:
 	or	$V,%lo(0xA0406080),$V
 	or	%l0,%lo(0x20C0E000),%l0
 	sllx	$V,32,$V
-	or	%l0,$V,$V		! (0xE0·i)&0xff=0xA040608020C0E000
+	or	%l0,$V,$V		! (0xE0·i)&0xff=0xA040608020C0E000
 	stx	$V,[%i0+16]
 
 	ret
@@ -399,7 +399,7 @@ gcm_gmult_vis3:
 
 	mov	0xE1,%l7
 	sllx	%l7,57,$xE1		! 57 is not a typo
-	ldx	[$Htable+16],$V		! (0xE0·i)&0xff=0xA040608020C0E000
+	ldx	[$Htable+16],$V		! (0xE0·i)&0xff=0xA040608020C0E000
 
 	xor	$Hhi,$Hlo,$Hhl		! Karatsuba pre-processing
 	xmulx	$Xlo,$Hlo,$C0
@@ -411,9 +411,9 @@ gcm_gmult_vis3:
 	xmulx	$Xhi,$Hhi,$Xhi
 
 	sll	$C0,3,$sqr
-	srlx	$V,$sqr,$sqr		! ·0xE0 [implicit &(7<<3)]
+	srlx	$V,$sqr,$sqr		! ·0xE0 [implicit &(7<<3)]
 	xor	$C0,$sqr,$sqr
-	sllx	$sqr,57,$sqr		! ($C0·0xE1)<<1<<56 [implicit &0x7f]
+	sllx	$sqr,57,$sqr		! ($C0·0xE1)<<1<<56 [implicit &0x7f]
 
 	xor	$C0,$C1,$C1		! Karatsuba post-processing
 	xor	$Xlo,$C2,$C2
@@ -423,7 +423,7 @@ gcm_gmult_vis3:
 	xor	$Xhi,$C2,$C2
 	xor	$Xhi,$C1,$C1
 
-	xmulxhi	$C0,$xE1,$Xlo		! ·0xE1<<1<<56
+	xmulxhi	$C0,$xE1,$Xlo		! ·0xE1<<1<<56
 	 xor	$C0,$C2,$C2
 	xmulx	$C1,$xE1,$C0
 	 xor	$C1,$C3,$C3
@@ -453,7 +453,7 @@ gcm_ghash_vis3:
 
 	mov	0xE1,%l7
 	sllx	%l7,57,$xE1		! 57 is not a typo
-	ldx	[$Htable+16],$V		! (0xE0·i)&0xff=0xA040608020C0E000
+	ldx	[$Htable+16],$V		! (0xE0·i)&0xff=0xA040608020C0E000
 
 	and	$inp,7,$shl
 	andn	$inp,7,$inp
@@ -490,9 +490,9 @@ gcm_ghash_vis3:
 	xmulx	$Xhi,$Hhi,$Xhi
 
 	sll	$C0,3,$sqr
-	srlx	$V,$sqr,$sqr		! ·0xE0 [implicit &(7<<3)]
+	srlx	$V,$sqr,$sqr		! ·0xE0 [implicit &(7<<3)]
 	xor	$C0,$sqr,$sqr
-	sllx	$sqr,57,$sqr		! ($C0·0xE1)<<1<<56 [implicit &0x7f]
+	sllx	$sqr,57,$sqr		! ($C0·0xE1)<<1<<56 [implicit &0x7f]
 
 	xor	$C0,$C1,$C1		! Karatsuba post-processing
 	xor	$Xlo,$C2,$C2
@@ -502,7 +502,7 @@ gcm_ghash_vis3:
 	xor	$Xhi,$C2,$C2
 	xor	$Xhi,$C1,$C1
 
-	xmulxhi	$C0,$xE1,$Xlo		! ·0xE1<<1<<56
+	xmulxhi	$C0,$xE1,$Xlo		! ·0xE1<<1<<56
 	 xor	$C0,$C2,$C2
 	xmulx	$C1,$xE1,$C0
 	 xor	$C1,$C3,$C3
diff --git a/crypto/modes/asm/ghash-x86.pl b/crypto/modes/asm/ghash-x86.pl
index 23a5527b30..0269169fa7 100644
--- a/crypto/modes/asm/ghash-x86.pl
+++ b/crypto/modes/asm/ghash-x86.pl
@@ -358,7 +358,7 @@ $S=12;		# shift factor for rem_4bit
 # effective address calculation and finally merge of value to Z.hi.
 # Reference to rem_4bit is scheduled so late that I had to >>4
 # rem_4bit elements. This resulted in 20-45% procent improvement
-# on contemporary µ-archs.
+# on contemporary µ-archs.
 {
     my $cnt;
     my $rem_4bit = "eax";
diff --git a/crypto/modes/asm/ghash-x86_64.pl b/crypto/modes/asm/ghash-x86_64.pl
index 6e656ca13b..5a7ce39486 100644
--- a/crypto/modes/asm/ghash-x86_64.pl
+++ b/crypto/modes/asm/ghash-x86_64.pl
@@ -576,15 +576,15 @@ $code.=<<___ if (0 || (&reduction_alg9($Xhi,$Xi)&&0));
 	# experimental alternative. special thing about is that there
 	# no dependency between the two multiplications... 
 	mov		\$`0xE1<<1`,%eax
-	mov		\$0xA040608020C0E000,%r10	# ((7..0)·0xE0)&0xff
+	mov		\$0xA040608020C0E000,%r10	# ((7..0)·0xE0)&0xff
 	mov		\$0x07,%r11d
 	movq		%rax,$T1
 	movq		%r10,$T2
 	movq		%r11,$T3		# borrow $T3
 	pand		$Xi,$T3
-	pshufb		$T3,$T2			# ($Xi&7)·0xE0
+	pshufb		$T3,$T2			# ($Xi&7)·0xE0
 	movq		%rax,$T3
-	pclmulqdq	\$0x00,$Xi,$T1		# ·(0xE1<<1)
+	pclmulqdq	\$0x00,$Xi,$T1		# ·(0xE1<<1)
 	pxor		$Xi,$T2
 	pslldq		\$15,$T2
 	paddd		$T2,$T2			# <<(64+56+1)
@@ -657,7 +657,7 @@ $code.=<<___;
 	je		.Lskip4x
 
 	sub		\$0x30,$len
-	mov		\$0xA040608020C0E000,%rax	# ((7..0)·0xE0)&0xff
+	mov		\$0xA040608020C0E000,%rax	# ((7..0)·0xE0)&0xff
 	movdqu		0x30($Htbl),$Hkey3
 	movdqu		0x40($Htbl),$Hkey4
 
diff --git a/crypto/modes/asm/ghashp8-ppc.pl b/crypto/modes/asm/ghashp8-ppc.pl
index e76a58c343..71457cf4fc 100755
--- a/crypto/modes/asm/ghashp8-ppc.pl
+++ b/crypto/modes/asm/ghashp8-ppc.pl
@@ -118,9 +118,9 @@ $code=<<___;
 	 le?vperm	$IN,$IN,$IN,$lemask
 	vxor		$zero,$zero,$zero
 
-	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
-	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
-	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
+	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
 
 	vpmsumd		$t2,$Xl,$xC2		# 1st phase
 
@@ -178,11 +178,11 @@ $code=<<___;
 .align	5
 Loop:
 	 subic		$len,$len,16
-	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
+	vpmsumd		$Xl,$IN,$Hl		# H.lo·Xi.lo
 	 subfe.		r0,r0,r0		# borrow?-1:0
-	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
+	vpmsumd		$Xm,$IN,$H		# H.hi·Xi.lo+H.lo·Xi.hi
 	 and		r0,r0,$len
-	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
+	vpmsumd		$Xh,$IN,$Hh		# H.hi·Xi.hi
 	 add		$inp,$inp,r0
 
 	vpmsumd		$t2,$Xl,$xC2		# 1st phase
diff --git a/crypto/modes/asm/ghashv8-armx.pl b/crypto/modes/asm/ghashv8-armx.pl
index 3750d251f0..fe3a34d28e 100644
--- a/crypto/modes/asm/ghashv8-armx.pl
+++ b/crypto/modes/asm/ghashv8-armx.pl
@@ -144,10 +144,10 @@ gcm_gmult_v8:
 #endif
 	vext.8		$IN,$t1,$t1,#8
 
-	vpmull.p64	$Xl,$H,$IN		@ H.lo·Xi.lo
+	vpmull.p64	$Xl,$H,$IN		@ H.lo·Xi.lo
 	veor		$t1,$t1,$IN		@ Karatsuba pre-processing
-	vpmull2.p64	$Xh,$H,$IN		@ H.hi·Xi.hi
-	vpmull.p64	$Xm,$Hhl,$t1		@ (H.lo+H.hi)·(Xi.lo+Xi.hi)
+	vpmull2.p64	$Xh,$H,$IN		@ H.hi·Xi.hi
+	vpmull.p64	$Xm,$Hhl,$t1		@ (H.lo+H.hi)·(Xi.lo+Xi.hi)
 
 	vext.8		$t1,$Xl,$Xh,#8		@ Karatsuba post-processing
 	veor		$t2,$Xl,$Xh
@@ -235,7 +235,7 @@ $code.=<<___;
 #endif
 	vext.8		$In,$t1,$t1,#8
 	veor		$IN,$IN,$Xl		@ I[i]^=Xi
-	vpmull.p64	$Xln,$H,$In		@ H·Ii+1
+	vpmull.p64	$Xln,$H,$In		@ H·Ii+1
 	veor		$t1,$t1,$In		@ Karatsuba pre-processing
 	vpmull2.p64	$Xhn,$H,$In
 	b		.Loop_mod2x_v8
@@ -244,14 +244,14 @@ $code.=<<___;
 .Loop_mod2x_v8:
 	vext.8		$t2,$IN,$IN,#8
 	subs		$len,$len,#32		@ is there more data?
-	vpmull.p64	$Xl,$H2,$IN		@ H^2.lo·Xi.lo
+	vpmull.p64	$Xl,$H2,$IN		@ H^2.lo·Xi.lo
 	cclr		$inc,lo			@ is it time to zero $inc?
 
 	 vpmull.p64	$Xmn,$Hhl,$t1
 	veor		$t2,$t2,$IN		@ Karatsuba pre-processing
-	vpmull2.p64	$Xh,$H2,$IN		@ H^2.hi·Xi.hi
+	vpmull2.p64	$Xh,$H2,$IN		@ H^2.hi·Xi.hi
 	veor		$Xl,$Xl,$Xln		@ accumulate
-	vpmull2.p64	$Xm,$Hhl,$t2		@ (H^2.lo+H^2.hi)·(Xi.lo+Xi.hi)
+	vpmull2.p64	$Xm,$Hhl,$t2		@ (H^2.lo+H^2.hi)·(Xi.lo+Xi.hi)
 	 vld1.64	{$t0},[$inp],$inc	@ load [rotated] I[i+2]
 
 	veor		$Xh,$Xh,$Xhn
@@ -276,7 +276,7 @@ $code.=<<___;
 	 vext.8		$In,$t1,$t1,#8
 	 vext.8		$IN,$t0,$t0,#8
 	veor		$Xl,$Xm,$t2
-	 vpmull.p64	$Xln,$H,$In		@ H·Ii+1
+	 vpmull.p64	$Xln,$H,$In		@ H·Ii+1
 	veor		$IN,$IN,$Xh		@ accumulate $IN early
 
 	vext.8		$t2,$Xl,$Xl,#8		@ 2nd phase of reduction
@@ -300,10 +300,10 @@ $code.=<<___;
 	veor		$IN,$IN,$Xl		@ inp^=Xi
 	veor		$t1,$t0,$t2		@ $t1 is rotated inp^Xi
 
-	vpmull.p64	$Xl,$H,$IN		@ H.lo·Xi.lo
+	vpmull.p64	$Xl,$H,$IN		@ H.lo·Xi.lo
 	veor		$t1,$t1,$IN		@ Karatsuba pre-processing
-	vpmull2.p64	$Xh,$H,$IN		@ H.hi·Xi.hi
-	vpmull.p64	$Xm,$Hhl,$t1		@ (H.lo+H.hi)·(Xi.lo+Xi.hi)
+	vpmull2.p64	$Xh,$H,$IN		@ H.hi·Xi.hi
+	vpmull.p64	$Xm,$Hhl,$t1		@ (H.lo+H.hi)·(Xi.lo+Xi.hi)
 
 	vext.8		$t1,$Xl,$Xh,#8		@ Karatsuba post-processing
 	veor		$t2,$Xl,$Xh