Enhanced support for IA-64 Linux and HP-UX (as well as better support for

HP-UX in common in ./config). Note that for the moment of this writing
none of 64-bit platforms pass bntest. I'm committing this anyway as it's
too frustrating to patch snapshots over and over while 0.9.6 is known to
work.

5 files changed, 115 insertions, 16 deletions

diff --git a/CHANGES b/CHANGES
index 5e6d2204a3..03cee2a3e4 100644
--- a/CHANGES
+++ b/CHANGES
@@ -12,6 +12,9 @@
          *) applies to 0.9.6a/0.9.6b/0.9.6c and 0.9.7
          +) applies to 0.9.7 only
 
+  +) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
+     [Andy Polyakov]
+
   *) Modified SSL library such that the verify_callback that has been set
      specificly for an SSL object with SSL_set_verify() is actually being
      used. Before the change, a verify_callback set with this function was
diff --git a/Configure b/Configure
index f3aad8c0bb..a10ec8d64b 100755
--- a/Configure
+++ b/Configure
@@ -233,7 +233,7 @@ my %table=(
 # - Keep in mind that the HP compiler by default generates code
 #   suitable for execution on the host you're currently compiling at.
 #   If the toolkit is ment to be used on various PA-RISC processors
-#   consider './config +Dportable'.
+#   consider './config +DAportable'.
 # - +DD64 is chosen in favour of +DA2.0W because it's ment to be
 #   compatible with *future* releases.
 # - If you run ./Configure hpux-parisc-[g]cc manually don't forget to
@@ -251,6 +251,13 @@ my %table=(
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl:hpux-shared:-fPIC:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn:hpux64-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
+# IA-64 targets
+# I have no idea if this one actually works, feedback needed. <appro>
+"hpux-ia64-cc","cc:-Ae +DD32 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
+# with debugging of the following config.
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/ia64-cpp.o:::::::::dlfcn:hpux64-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
@@ -258,6 +265,8 @@ my %table=(
 "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl:hpux-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn:hpux64-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# Isn't the line below meaningless? HP-UX cc optimizes for host by default.
+# hpux-parisc1_0-cc with +DAportable flag would make more sense. <appro>
 "hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl:hpux-shared:+Z:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 # HPUX 9.X config.
@@ -332,7 +341,7 @@ my %table=(
 "linux-ppc",    "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::::::::::dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-m68k",   "gcc:-DB_ENDIAN -DTERMIO -O2 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
 "linux-s390",	"gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:::BN_LLONG::",
-"linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown):::SIXTY_FOUR_BIT_LONG::",
+"linux-ia64",   "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR:asm/ia64.o:::::::::dlfcn:linux-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-m68",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "NetBSD-x86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}::::::::::dlfcn:bsd-gcc-shared:-fPIC:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
diff --git a/TABLE b/TABLE
index a14b8b5e24..2871c8a70a 100644
--- a/TABLE
+++ b/TABLE
@@ -1517,6 +1517,29 @@ $shared_cflag = -fPIC
 $shared_extension = .sl.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 
+*** hpux-ia64-cc
+$cc           = cc
+$cflags       = -Ae +DD32 +O3 +ESlit -z -DB_ENDIAN
+$unistd       = 
+$thread_cflag = -D_REENTRANT
+$sys_id       = 
+$lflags       = -ldl
+$bn_ops       = SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT
+$bn_obj       = asm/ia64-cpp.o
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= hpux-shared
+$shared_cflag = +Z
+$shared_extension = .sl.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
 *** hpux-parisc-cc
 $cc           = cc
 $cflags       = +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY
@@ -1724,6 +1747,29 @@ $shared_cflag = -fPIC
 $shared_extension = .sl.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 
+*** hpux64-ia64-cc
+$cc           = cc
+$cflags       = -Ae +DD64 +O3 +ESlit -z -DB_ENDIAN
+$unistd       = 
+$thread_cflag = -D_REENTRANT
+$sys_id       = 
+$lflags       = -ldl
+$bn_ops       = SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT
+$bn_obj       = asm/ia64-cpp.o
+$des_obj      = 
+$bf_obj       = 
+$md5_obj      = 
+$sha1_obj     = 
+$cast_obj     = 
+$rc4_obj      = 
+$rmd160_obj   = 
+$rc5_obj      = 
+$dso_scheme   = dlfcn
+$shared_target= hpux64-shared
+$shared_cflag = +Z
+$shared_extension = .sl.$(SHLIB_MAJOR).$(SHLIB_MINOR)
+$ranlib       = 
+
 *** hpux64-parisc-cc
 $cc           = cc
 $cflags       = -Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY
@@ -2096,11 +2142,11 @@ $ranlib       =
 $cc           = gcc
 $cflags       = -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall
 $unistd       = 
-$thread_cflag = (unknown)
+$thread_cflag = -D_REENTRANT
 $sys_id       = 
-$lflags       = 
-$bn_ops       = SIXTY_FOUR_BIT_LONG
-$bn_obj       = 
+$lflags       = -ldl
+$bn_ops       = SIXTY_FOUR_BIT_LONG RC4_CHUNK RC4_CHAR
+$bn_obj       = asm/ia64.o
 $des_obj      = 
 $bf_obj       = 
 $md5_obj      = 
@@ -2109,10 +2155,10 @@ $cast_obj     =
 $rc4_obj      = 
 $rmd160_obj   = 
 $rc5_obj      = 
-$dso_scheme   = 
-$shared_target= 
-$shared_cflag = 
-$shared_extension = 
+$dso_scheme   = dlfcn
+$shared_target= linux-shared
+$shared_cflag = -fPIC
+$shared_extension = .so.$(SHLIB_MAJOR).$(SHLIB_MINOR)
 $ranlib       = 
 
 *** linux-m68k
diff --git a/config b/config
index ec549098e7..9b40add6d5 100755
--- a/config
+++ b/config
@@ -135,10 +135,7 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
     HP-UX:*)
 	HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "$HPUXVER" in
-	    11.*)
-		echo "${MACHINE}-hp-hpux11"; exit 0
-		;;
-	    10.*)
+	    1[0-9].*)	# HPUX 10 and 11 targets are unified
 		echo "${MACHINE}-hp-hpux10"; exit 0
 		;;
 	    *)
@@ -567,8 +564,40 @@ EOF
   BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
   RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
   *-siemens-sysv4) OUT="SINIX" ;;
-  *-hpux1*)	OUT="hpux-parisc-$CC"
-		options="$options -D_REENTRANT" ;;
+  *-hpux1*)
+	OUT="hpux-parisc-$CC"
+	KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
+	KERNEL_BITS=${KERNEL_BITS:-32}
+	CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
+	CPU_VERSION=${CPU_VERSION:-0}
+	# See <sys/unistd.h> for further info on CPU_VERSION.
+	if   [ $CPU_VERSION -ge 768 ]; then	# IA-64 CPU
+	     echo "NOTICE! 64-bit is the only ABI currently operational on HP-UXi."
+	     echo "        Post request to openssl-dev@openssl.org for 32-bit support."
+	     if [ "$TEST" = "false" ]; then
+		(stty -icanon min 0 time 50; read waste) < /dev/tty
+	     fi
+	     OUT="hpux64-ia64-cc"
+	elif [ $CPU_VERSION -ge 532 ]; then	# PA-RISC 2.x CPU
+	     if [ "$CC" = "cc" ]; then
+		OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc?
+	     fi
+	     if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
+		echo "WARNING! If you wish to build 64-bit library then you have to"
+		echo "         invoke './Configure hpux64-parisc2-cc' *manually*."
+		if [ "$TEST" = "false" ]; then
+		  echo "         You have about 5 seconds to press Ctrl-C to abort."
+		  (stty -icanon min 0 time 50; read waste) < /dev/tty
+		fi
+	     fi
+	elif [ $CPU_VERSION -ge 528 ]; then	# PA-RISC 1.1+ CPU
+	     :
+	elif [ $CPU_VERSION -ge 523 ]; then	# PA-RISC 1.0 CPU
+	     :
+	else					# Motorola(?) CPU
+	     OUT="hpux-$CC"
+	fi
+	options="$options -D_REENTRANT" ;;
   *-hpux)	OUT="hpux-parisc-$CC" ;;
   # these are all covered by the catchall below
   # *-aix) OUT="aix-$CC" ;;
diff --git a/crypto/bn/Makefile.ssl b/crypto/bn/Makefile.ssl
index 19db2b5275..30dd88863c 100644
--- a/crypto/bn/Makefile.ssl
+++ b/crypto/bn/Makefile.ssl
@@ -124,6 +124,18 @@ asm/sparcv8plus-gcc27.o: asm/sparcv8plus.S
 	$(CC) $(ASFLAGS) -E asm/sparcv8plus.S | \
 		/usr/ccs/bin/as -xarch=v8plus - -o asm/sparcv8plus-gcc27.o
 
+
+asm/ia64.o:	asm/ia64.S
+
+# Some compiler drivers (most notably HP-UX and Intel C++) don't
+# understand .S extension:-( I wish I could pipe output from cc -E,
+# but it's too compiler driver/ABI dependent to cover with a single
+# rule...	<appro@fy.chalmers.se>
+asm/ia64-cpp.o:	asm/ia64.S
+	$(CC) $(ASFLAGS) -E asm/ia64.S > /tmp/ia64.$$$$.s &&	\
+	$(CC) $(ASFLAGS) -c -o asm/ia64-cpp.o /tmp/ia64.$$$$.s;	\
+	rm -f /tmp/ia64.$$$$.s
+
 files:
 	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO