diff options
author | Richard Levitte <levitte@openssl.org> | 2016-01-30 07:14:58 +0100 |
---|---|---|
committer | Richard Levitte <levitte@openssl.org> | 2016-02-10 14:36:32 +0100 |
commit | e84193e43dbd3da23845ef9fcfcb5e364049a396 (patch) | |
tree | 05cd92323c3ac2a5ceea773e5a432c41d07c2513 | |
parent | 9c44c29ef2cadb2f0ff214096ccf731ce2660d64 (diff) |
unified build scheme: add a "unified" template for VMS descrip.mms
As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output. mkdef.pl should ONLY output a symbol
vector.
Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC. To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.
Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:
@config
Reviewed-by: Rich Salz <rsalz@openssl.org>
-rw-r--r-- | Configurations/00-base-templates.conf | 1 | ||||
-rw-r--r-- | Configurations/10-main.conf | 60 | ||||
-rw-r--r-- | Configurations/README | 2 | ||||
-rw-r--r-- | Configurations/descrip.mms.tmpl | 634 | ||||
-rw-r--r-- | VMS/engine.opt | 2 | ||||
-rw-r--r-- | VMS/openssl_shutdown.com.in | 59 | ||||
-rw-r--r-- | VMS/openssl_startup.com.in | 115 | ||||
-rw-r--r-- | VMS/openssl_utils.com | 56 | ||||
-rw-r--r-- | VMS/translatesyms.pl | 55 | ||||
-rw-r--r-- | apps/build.info | 3 | ||||
-rw-r--r-- | build.info | 12 | ||||
-rw-r--r-- | config.com | 65 | ||||
-rw-r--r-- | crypto/build.info | 6 | ||||
-rw-r--r-- | crypto/rand/build.info | 2 | ||||
-rw-r--r-- | include/openssl/__decc_include_epilogue.h | 7 | ||||
-rw-r--r-- | include/openssl/__decc_include_prologue.h | 11 | ||||
-rwxr-xr-x | util/mkdef.pl | 33 |
17 files changed, 1058 insertions, 65 deletions
diff --git a/Configurations/00-base-templates.conf b/Configurations/00-base-templates.conf index 713e374f72..1771e3d386 100644 --- a/Configurations/00-base-templates.conf +++ b/Configurations/00-base-templates.conf @@ -12,6 +12,7 @@ thread_cflags => "", thread_defines => [], + apps_extra_src => "", cpuid_asm_src => "mem_clr.c", bn_asm_src => "bn_asm.c", ec_asm_src => "", diff --git a/Configurations/10-main.conf b/Configurations/10-main.conf index db64b9ef07..28322e3ac7 100644 --- a/Configurations/10-main.conf +++ b/Configurations/10-main.conf @@ -1523,4 +1523,64 @@ ranlib => "$ENV{'RANLIB'}", }, + ##### VMS + "vms-generic" => { + template => 1, + cc => "CC/DECC", + cflags => "/STANDARD=RELAXED/NOLIST/PREFIX=ALL/NAMES=(AS_IS,SHORTENED)", + debug_cflags => "/NOOPTIMIZE/DEBUG", + release_cflags => "/OPTIMIZE/NODEBUG", + lflags => "/MAP", + debug_lflags => "/DEBUG/TRACEBACK", + release_lflags => "/NODEBUG/NOTRACEBACK", + shared_target => "vms-shared", + + apps_extra_src => "vms_decc_init.c", + build_file => "descrip.mms", + build_scheme => [ "unified", "VMS" ], + }, + + # VMS on VAX is *unsupported* + #"vms-asm" => { + # template => 1, + # bn_obj => "[.asm]vms.obj vms-helper.obj" + #}, + #"vms-vax" => { + # inherit_from => [ "vms-generic", asm("vms-asm") ], + # as => "MACRO", + # debug_aflags => "/NOOPTIMIZE/DEBUG", + # release_aflags => "/OPTIMIZE/NODEBUG", + # bn_opts => "THIRTY_TWO_BIT RC4_CHAR RC4_CHUNK DES_PTR BF_PTR", + #}, + "vms-alpha" => { + inherit_from => [ "vms-generic" ], + #as => "???", + #debug_aflags => "/NOOPTIMIZE/DEBUG", + #release_aflags => "/OPTIMIZE/NODEBUG", + bn_opts => "SIXTY_FOUR_BIT RC4_INT RC4_CHUNK_LL DES_PTR BF_PTR", + }, + "vms-alpha-P32" => { + inherit_from => [ "vms-alpha" ], + cflags => add("/POINTER_SIZE=32"), + }, + "vms-alpha-P64" => { + inherit_from => [ "vms-alpha" ], + cflags => add("/POINTER_SIZE=64"), + }, + "vms-ia64" => { + inherit_from => [ "vms-generic" ], + #as => "I4S", + #debug_aflags => "/NOOPTIMIZE/DEBUG", + #release_aflags => "/OPTIMIZE/NODEBUG", + bn_opts => "SIXTY_FOUR_BIT RC4_INT RC4_CHUNK_LL DES_PTR BF_PTR", + }, + "vms-ia64-P32" => { + inherit_from => [ "vms-ia64" ], + cflags => add("/POINTER_SIZE=32"), + }, + "vms-ia64-P64" => { + inherit_from => [ "vms-ia64" ], + cflags => add("/POINTER_SIZE=64"), + }, + ); diff --git a/Configurations/README b/Configurations/README index 9f6071e8b9..b67506a590 100644 --- a/Configurations/README +++ b/Configurations/README @@ -163,6 +163,8 @@ In each table entry, the following keys are significant: export vars as accessor functions. + apps_extra_src => Extra source to build apps/openssl, as + needed by the target. cpuid_asm_src => assembler implementation of cpuid code as well as OPENSSL_cleanse(). Default to mem_clr.c diff --git a/Configurations/descrip.mms.tmpl b/Configurations/descrip.mms.tmpl new file mode 100644 index 0000000000..0d5c7ba695 --- /dev/null +++ b/Configurations/descrip.mms.tmpl @@ -0,0 +1,634 @@ +## descrip.mms to build OpenSSL on OpenVMS +## +## {- join("\n## ", @autowarntext) -} +{- + use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/; + + # Our prefix, claimed when speaking with the VSI folks Tuesday + # January 26th 2016 + our $osslprefix = 'OSSL$'; + (our $osslprefix_q = $osslprefix) =~ s/\$/\\\$/; + + our $sourcedir = $config{sourcedir}; + our $builddir = $config{builddir}; + sub sourcefile { + catfile($sourcedir, @_); + } + sub buildfile { + catfile($builddir, @_); + } + sub sourcedir { + catdir($sourcedir, @_); + } + sub builddir { + catdir($builddir, @_); + } + sub tree { + (my $x = shift) =~ s|\]$|...]|; + $x + } + sub move { + my $f = catdir(@_); + my $b = abs2rel(rel2abs("."),rel2abs($f)); + $sourcedir = catdir($b,$sourcedir) + if !file_name_is_absolute($sourcedir); + $builddir = catdir($b,$builddir) + if !file_name_is_absolute($builddir); + ""; + } + + # This is a horrible hack, but is needed because recursive inclusion of files + # in different directories does not work well with HP C. + my $sd = sourcedir("crypto", "async", "arch"); + foreach (grep /\[\.crypto\.async\.arch\].*\.o$/, keys %{$unified_info{sources}}) { + (my $x = $_) =~ s|\.o$|.OBJ|; + $unified_info{before}->{$x} + = qq(arch = F\$PARSE("$sd","A.;",,,"SYNTAX_ONLY") - "A.;" + define arch 'arch'); + $unified_info{after}->{$x} + = qq(deassign arch); + } + my $sd1 = sourcedir("ssl","record"); + my $sd2 = sourcedir("ssl","statem"); + $unified_info{before}->{"[.crypto.ct]ct_lib.OBJ"} + = $unified_info{before}->{"[.test]heartbeat_test.OBJ"} + = $unified_info{before}->{"[.test]ssltest.OBJ"} + = qq(record = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;" + define record 'record' + statem = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;" + define statem 'statem'); + $unified_info{after}->{"[.crypto.ct]ct_lib.OBJ"} + = $unified_info{after}->{"[.test]heartbeat_test.OBJ"} + = $unified_info{after}->{"[.test]ssltest.OBJ"} + = qq(deassign statem + deassign record); + foreach (grep /^\[\.ssl\.(?:record|statem)\].*\.o$/, keys %{$unified_info{sources}}) { + (my $x = $_) =~ s|\.o$|.OBJ|; + $unified_info{before}->{$x} + = qq(record = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;" + define record 'record' + statem = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;" + define statem 'statem'); + $unified_info{after}->{$x} + = qq(deassign statem + deassign record); + } + #use Data::Dumper; + #print STDERR "DEBUG: before:\n", Dumper($unified_info{before}); + #print STDERR "DEBUG: after:\n", Dumper($unified_info{after}); + ""; +-} +PLATFORM={- $config{target} -} +OPTIONS={- $config{options} -} +CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -}) +SRCDIR={- $config{sourcedir} -} +BUILDDIR={- $config{builddir} -} + +VERSION={- $config{version} -} +MAJOR={- $config{major} -} +MINOR={- $config{minor} -} +SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -} +SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -} +SHLIB_MAJOR={- $config{shlib_major} -} +SHLIB_MINOR={- $config{shlib_minor} -} +SHLIB_TARGET={- $target{shared_target} -} + +EXE_EXT=.EXE +LIB_EXT=.OLB +SHLIB_EXT=.EXE +OBJ_EXT=.OBJ +DEP_EXT=.MMS + +LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @{$unified_info{libraries}}) -} +SHLIBS={- join(" ", map { $_."\$(SHLIB_EXT)" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) -} +ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{engines}}) -} +PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } grep { !m|^\[\.test\]| } @{$unified_info{programs}}) -} +TESTPROGS={- join(", ", map { "-\n\t".$_.".EXE" } grep { m|^\[\.test\]| } @{$unified_info{programs}}) -} +SCRIPTS={- join(", ", map { "-\n\t".$_ } @{$unified_info{scripts}}) -} + +# INSTALL_PREFIX is for package builders so that they can configure for, say, +# SYS$COMMON:[OPENSSL] and yet have everything installed in STAGING:[USER]. +# In that case, configure with --prefix=SYS$COMMON:[OPENSSL] and then run +# MMS with /MACROS=(INSTALL_PREFIX=STAGING:[USER]). The result will end +# up in STAGING:[USER.OPENSSL]. +# Note that INSTALL_PREFIX can also be given at configuration time, with +# --install_prefix. +# Normally it is left empty. +INSTALL_PREFIX={- $config{install_prefix} -} + +# Do not edit this manually. Use Configure --prefix=DIR to change this! +INSTALLTOP={- catdir($config{prefix}) || "SYS\$COMMON:[OPENSSL-\$(MAJOR).\$(MINOR)]" -} +# This is the standard central area to store certificates, private keys... +OPENSSLDIR={- catdir($config{openssldir}) || + $config{prefix} ? catdir($config{prefix},"SSL") + : "SYS\$COMMON:[SSL]" -} +# Where installed engines reside +ENGINESDIR={- $osslprefix -}ENGINES: + +CC= {- $target{cc} -} +CFLAGS= /DEFINE=({- join(",", @{$config{defines}},"OPENSSLDIR=\"\"\"\$(OPENSSLDIR)\"\"\"","ENGINESDIR=\"\"\"\$(ENGINESDIR)\"\"\"") -}) {- $config{cflags} -} +DEPFLAG= /DEFINE=({- join(",", @{$config{depdefines}}) -}) +LDFLAGS= {- $config{lflags} -} +EX_LIBS= {- $config{ex_libs} ? ",".$config{ex_libs} : "" -} + +PERL={- $config{perl} -} + +# We let the C compiler driver to take care of .s files. This is done in +# order to be excused from maintaining a separate set of architecture +# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC +# gcc, then the driver will automatically translate it to -xarch=v8plus +# and pass it down to assembler. +AS={- $target{as} -} +ASFLAG={- $target{asflags} -} + +# .FIRST and .LAST are special targets with MMS and MMK. +# The defines in there are for C. includes that look like +# this: +# +# #include <openssl/foo.h> +# #include "internal/bar.h" +# +# will use the logical names to find the files. Expecting +# DECompHP C to find files in subdirectories of whatever was +# given with /INCLUDE is a fantasy, unfortunately. +NODEBUG=@ +.FIRST : + $(NODEBUG) openssl_inc1 = F$PARSE("[.include.openssl]","A.;",,,"syntax_only") - "A.;" + $(NODEBUG) openssl_inc2 = F$PARSE("{- catdir($config{sourcedir},"[.include.openssl]") -}","a.;",,,"SYNTAX_ONLY") - "A.;" + $(NODEBUG) internal_inc1 = F$PARSE("[.crypto.include.internal]","A.;",,,"SYNTAX_ONLY") - "A.;" + $(NODEBUG) internal_inc2 = F$PARSE("{- catdir($config{sourcedir},"[.include.internal]") -}","A.;",,,"SYNTAX_ONLY") - "A.;" + $(NODEBUG) internal_inc3 = F$PARSE("{- catdir($config{sourcedir},"[.crypto.include.internal]") -}","A.;",,,"SYNTAX_ONLY") - "A.;" + $(NODEBUG) DEFINE openssl 'openssl_inc1','openssl_inc2' + $(NODEBUG) DEFINE internal 'internal_inc1','internal_inc2','internal_inc3' + $(NODEBUG) staging_dir = "$(INSTALL_PREFIX)" + $(NODEBUG) IF staging_dir .NES. "" THEN - + staging_dir = F$PARSE("A.;",staging_dir,"[]",,"SYNTAX_ONLY") - "A.;" + $(NODEBUG) ! + $(NODEBUG) ! Installation logical names + $(NODEBUG) ! + $(NODEBUG) installtop_dev = F$PARSE(staging_dir,"$(INSTALLTOP)",,"DEVICE","SYNTAX_ONLY") + $(NODEBUG) ! Because there are no routines to merge directories, we have to + $(NODEBUG) ! do it ourselves + $(NODEBUG) IF staging_dir .NES. "" THEN - + staging_dir = F$PARSE(staging_dir,"[000000]",,"DIRECTORY","SYNTAX_ONLY") + $(NODEBUG) installtop_dir = F$PARSE("$(INSTALLTOP)","[000000]",,"DIRECTORY","SYNTAX_ONLY") + $(NODEBUG) IF staging_dir .NES. "" .AND. staging_dir .NES. "[000000]" THEN - + installtop_dir = staging_dir - "]" + "." + (installtop_dir - "[") + $(NODEBUG) installtop_dir = installtop_dir - "]" + ".]" + $(NODEBUG) DEFINE ossl_installroot 'installtop_dev''installtop_dir' + $(NODEBUG) ! + $(NODEBUG) datatop = F$PARSE("$(OPENSSLDIR)","[000000]A.;",,,"SYNTAX_ONLY") - + - "]A.;" + ".]" + $(NODEBUG) IF "$(INSTALL_PREFIX)" .EQS. "" THEN - + DEFINE ossl_dataroot 'datatop' + $(NODEBUG) ! + $(NODEBUG) ! Figure out the architecture + $(NODEBUG) ! + $(NODEBUG) arch == f$edit( f$getsyi( "arch_name"), "upcase") + $(NODEBUG) ! + $(NODEBUG) ! Set up logical names for the libraries, so LINK and + $(NODEBUG) ! running programs can use them. + $(NODEBUG) ! + $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEFINE ".uc($_)." 'F\$ENV(\"DEFAULT\")'".uc($_)."\$(SHLIB_EXT)" } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -} + +.LAST : + $(NODEBUG) {- join("\n\t\$(NODEBUG) ", map { "DEASSIGN ".uc($_) } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "!" -} + $(NODEBUG) IF "$(INSTALL_PREFIX)" .EQS. "" THEN DEASSIGN ossl_dataroot + $(NODEBUG) DEASSIGN ossl_installroot + $(NODEBUG) DEASSIGN internal + $(NODEBUG) DEASSIGN openssl +.DEFAULT : + @ ! MMS cannot handle no actions... + +# The main targets ################################################### + +all : descrip.mms, $(LIBS), $(ENGINES), $(PROGRAMS), $(SCRIPTS), $(TESTPROGS) + +test tests : $(TESTPROGS), rehash + SET DEFAULT [.test]{- move("test") -} + DEFINE SRCTOP {- sourcedir() -} + DEFINE BLDTOP {- builddir() -} + $(PERL) {- sourcefile("test", "run_tests.pl") -} $(TESTS) + DEASSIGN BLDTOP + DEASSIGN SRCTOP + SET DEFAULT [-]{- move("..") -} + +list-tests : + @ TOP=$(SRCDIR) PERL=$(PERL) $(PERL) {- catfile($config{sourcedir},"test", "run_tests.pl") -} list + +# Because VMS wants the generation number (or *) to delete files, we can't +# use $(LIBS), $(PROGRAMS) and $(TESTPROGS) directly. +libclean : + - DELETE []OSSL$LIB*.OLB;*,OSSL$LIB*.LIS;* + - DELETE [.crypto...]*.OBJ;*,*.LIS;* + - DELETE [.ssl...]*.OBJ;*,*.LIS;* + - DELETE [.engines...]*.OBJ;*,*.LIS;* + - DELETE []CXX$DEMANGLER_DB.;* + +install : install_sw install_docs + +uninstall : uninstall_docs uninstall_sw + +clean : libclean + - DELETE []OSSL$LIB*.EXE;*,OSSL$LIB*.MAP;*,OSSL$LIB*.OPT;* + - DELETE [.engines...]LIB*.EXE;*,LIB*.MAP;*,LIB*.OPT;* + - DELETE [.apps]*.EXE;*,*.MAP;*,*.OPT;* + - DELETE [.apps]*.OBJ;*,*.LIS;* + - DELETE [.test]*.EXE;*,*.MAP;*,*.OPT;* + - DELETE [.test]*.OBJ;*,*.LIS;* + - DELETE [.test]*.LOG;* + - DELETE []*.MAP;* + +DCLEAN_CMD=$(PERL) -pe "if (/^# DO NOT DELETE.*/) { exit(0); }" +dclean : + $(DCLEAN_CMD) < descrip.mms > descrip.mms.new + RENAME descrip.mms.new descrip.mms + PURGE descrip.mms + +{- our @deps = map { (my $x = $_) =~ s|\.o$|\$(DEP_EXT)|; $x; } + grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ } + keys %{$unified_info{sources}}; + ""; -} +depend : {- join(",-\n\t", @deps); -} + $(DCLEAN_CMD) < descrip.mms > descrip.mms.new + OPEN/APPEND DESCRIP descrip.mms.new + WRITE DESCRIP "# DO NOT DELETE THIS LINE -- make depend depends on it." + {- join("\n\t", map { "TYPE $_ /OUTPUT=DESCRIP:" } @deps); -} + CLOSE DESCRIP + RENAME descrip.mms.new descrip.mms + PURGE descrip.mms + +# Install helper targets ############################################# + +install_sw : all install_dev install_engines install_runtime install_config + @ WRITE SYS$OUTPUT "" + @ WRITE SYS$OUTPUT "######################################################################" + @ WRITE SYS$OUTPUT "" + @ WRITE SYS$OUTPUT "Installation complete" + @ WRITE SYS$OUTPUT "" + @ IF "$(INSTALL_PREFIX)" .NES. "" THEN EXIT 1 + @ WRITE SYS$OUTPUT "Run @$(INSTALLTOP)openssl_startup to set up logical names" + @ WRITE SYS$OUTPUT "then run @$(INSTALLTOP)openssl_setup to define commands" + @ WRITE SYS$OUTPUT "" + +uninstall_sw : uninstall_dev uninstall_engines uninstall_runtime uninstall_config + +install_docs : install_man_docs install_html_docs + +uninstall_docs : uninstall_man_docs uninstall_html_docs + +install_dev : check_INSTALLTOP + @ WRITE SYS$OUTPUT "*** Installing development files" + @ ! Install header files + CREATE/DIR ossl_installroot:[include.openssl] + COPY/PROT=W:R openssl:*.h ossl_installroot:[include.openssl] + @ ! Install libraries + CREATE/DIR ossl_installroot:['arch'.LIB] + {- join("\n ", + map { "COPY/PROT=W:R $_.OLB ossl_installroot:['arch'.LIB]" } + @{$unified_info{libraries}}) -} + @ {- output_off() if $config{no_shared}; "" -} ! + {- join("\n ", + map { "COPY/PROT=W:RE $_.EXE ossl_installroot:['arch'.LIB]" } + map { $unified_info{sharednames}->{$_} || () } + @{$unified_info{libraries}}) -} + @ {- output_on() -} ! + +install_runtime : check_INSTALLTOP + @ WRITE SYS$OUTPUT "*** Installing runtime files" + @ ! Install the main program + CREATE/DIR ossl_installroot:['arch'.EXE] + COPY/PROT=W:RE [.APPS]openssl.EXE ossl_installroot:['arch'.EXE] + @ ! Install scripts + CREATE/DIR ossl_installroot:[EXE] + COPY/PROT=W:RE [.APPS]CA.pl ossl_installroot:[EXE] + COPY/PROT=W:RE [.TOOLS]c_rehash. ossl_installroot:[EXE]c_rehash.pl + @ ! Install configuration file + COPY/PROT=W:RE {- sourcefile("apps", "openssl-vms.cnf") -} - + ossl_installroot:[000000]openssl.cnf + +install_engines : check_INSTALLTOP + @ {- output_off() if $config{no_shared}; "" -} ! + @ WRITE SYS$OUTPUT "*** Installing engines" + CREATE/DIR ossl_installroot:['arch'.ENGINES] + COPY/PROT=W:RE [.ENGINES]*.EXE ossl_installroot:['arch'.ENGINES] + @ {- output_on() -} ! + +install_config : [.VMS]openssl_startup.com [.VMS]openssl_shutdown.com - + check_INSTALLTOP + IF "$(INSTALL_PREFIX)" .EQS. "" THEN - + IF F$SEARCH("OSSL_DATAROOT:[000000]CERTS.DIR;1") .EQS. "" THEN - + CREATE/DIR/PROT=(S:RWED,O:RWE,G:RE,W:RE) OSSL_DATAROOT:[CERTS] + IF "$(INSTALL_PREFIX)" .EQS. "" THEN - + IF F$SEARCH("OSSL_DATAROOT:[000000]PRIVATE.DIR;1") .EQS. "" THEN - + CREATE/DIR/PROT=(S:RWED,O:RWE,G:,W:) OSSL_DATAROOT:[PRIVATE] + CREATE/DIR ossl_installroot:[SYS$STARTUP] + COPY/PROT=W:RE - + [.VMS]openssl_startup.com,openssl_shutdown.com - + ossl_installroot:[SYS$STARTUP] + COPY/PROT=W:RE - + {- sourcefile("VMS", "openssl_utils.com") -} - + ossl_installroot:[SYS$STARTUP] + +[.VMS]openssl_startup.com : vmsconfig.pm + CREATE/DIR [.VMS] + $(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} - + {- sourcefile("VMS", "openssl_startup.com.in") -} - + > [.VMS]openssl_startup.com + +[.VMS]openssl_shutdown.com : vmsconfig.pm + CREATE/DIR [.VMS] + $(PERL) "-I." "-Mvmsconfig" {- sourcefile("util", "dofile.pl") -} - + {- sourcefile("VMS", "openssl_shutdown.com.in") -} - + > [.VMS]openssl_shutdown.com + +vmsconfig.pm : descrip.mms + OPEN/WRITE/SHARE=READ CONFIG []vmsconfig.pm + WRITE CONFIG "package vmsconfig;" + WRITE CONFIG "use strict; use warnings;" + WRITE CONFIG "use Exporter;" + WRITE CONFIG "our @ISA = qw(Exporter);" + WRITE CONFIG "our @EXPORT = qw(%config %target %withargs %unified_info);" + WRITE CONFIG "our %config = (" + WRITE CONFIG " target => '{- $config{target} -}'," + WRITE CONFIG " version => '$(MAJOR).$(MINOR)'," + WRITE CONFIG " no_shared => '","{- $config{no_shared} -}","'," + WRITE CONFIG " INSTALLTOP => '$(INSTALLTOP)'," + WRITE CONFIG " OPENSSLDIR => '$(OPENSSLDIR)'," + WRITE CONFIG " pointersize => '","{- $target{pointersize} -}","'," + WRITE CONFIG " shared_libs => [" + {- join("\n ", map { "WRITE CONFIG \" '$_'," } map { $unified_info{sharednames}->{$_} || () } @{$unified_info{libraries}}) || "\@ !" -} + WRITE CONFIG " ]," + WRITE CONFIG ");" + WRITE CONFIG "our %target = ();" + WRITE CONFIG "our %withargs = ();" + WRITE CONFIG "our %unified_info = ();" + WRITE CONFIG "1;" + CLOSE CONFIG + +check_INSTALLTOP : + @ IF "$(INSTALLTOP)" .EQS. "" THEN - + WRITE SYS$ERROR "INSTALLTOP should not be empty" + @ IF "$(INSTALLTOP)" .EQS. "" THEN - + EXIT %x10000002 + +# Helper targets ##################################################### + +rehash : [.apps]openssl.exe, copy-certs + !MCR [.apps]openssl.exe rehash {- builddir("certs", "demo") -} + $(PERL) [.tools]c_rehash. [.certs.demo] + +copy-certs : + @ IF F$SEARCH("{- buildfile("certs.dir") -}") .EQS. "" THEN - + CREATE/DIR {- builddir("certs") -} + -@ IF "{- sourcedir("certs") -}" .NES. "{- builddir("certs") -}" THEN - + COPY {- tree(sourcedir("certs")) -}*.* {- tree(builddir("certs")) -} + +# Developer targets ################################################## + +debug_logicals : + SH LOGICAL/PROC openssl,internal,ossl_installroot + IF "$(INSTALL_PREFIX)" .EQS. "" THEN - + SH LOGICAL/PROC ossl_dataroot + +# Building targets ################################################### + +descrip.mms : {- sourcefile("Configurations", "descrip.mms.tmpl") -} $(SRCDIR)Configure ! $(SRCDIR)config.com + @ WRITE SYS$OUTPUT "descrip.mms is older than $?." + @ WRITE SYS$OUTPUT "Reconfiguring..." + perl $(SRCDIR)Configure reconf + @ WRITE SYS$OUTPUT "*************************************************" + @ WRITE SYS$OUTPUT "*** ***" + @ WRITE SYS$OUTPUT "*** Please run the same mms command again ***" + @ WRITE SYS$OUTPUT "*** ***" + @ WRITE SYS$OUTPUT "*************************************************" + @ exit %10000000 + +{- + use File::Basename; + use File::Spec::Functions qw/abs2rel rel2abs catfile catdir/; + sub src2dep { + my %args = @_; + my $dep = $args{obj}; + + # Because VMS C isn't very good at combining a /INCLUDE path with + # #includes having a relative directory (like '#include "../foo.h"), + # the best choice is to move to the first source file's intended + # directory before compiling, and make sure to write the object file + # in the correct position (important when the object tree is other + # than the source tree). + my $forward = dirname($args{srcs}->[0]); + my $backward = abs2rel(rel2abs("."), rel2abs($forward)); + my $depd = abs2rel(rel2abs(dirname($dep)), rel2abs($forward)); + my $depn = basename($dep); + my $srcs = + join(", ", + map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}}); + my $incs = + "/INCLUDE=(".join(",", + map { + file_name_is_absolute($_) + ? $_ : catdir($backward,$_) + } @{$args{incs}}).")"; + my $before = $unified_info{before}->{$dep.".OBJ"} || "\@ !"; + my $after = $unified_info{after}->{$dep.".OBJ"} || "\@ !"; + + return <<"EOF"; +$dep.MMS : $srcs + ${before} + SET DEFAULT $forward + \$(CC) \$(CFLAGS)${incs} /MMS=(TARGET=.OBJ)/OBJECT=${depd}${depn}.MMS $srcs + SET DEFAULT $backward + ${after} + - PURGE $dep.MMS +EOF + } + sub src2obj { + my %args = @_; + my $obj = $args{obj}; + my $deps = join(", -\n\t\t", @{$args{srcs}}, @{$args{deps}}); + + # Because VMS C isn't very good at combining a /INCLUDE path with + # #includes having a relative directory (like '#include "../foo.h"), + # the best choice is to move to the first source file's intended + # directory before compiling, and make sure to write the object file + # in the correct position (important when the object tree is other + # than the source tree). + my $forward = dirname($args{srcs}->[0]); + my $backward = abs2rel(rel2abs("."), rel2abs($forward)); + my $objd = abs2rel(rel2abs(dirname($obj)), rel2abs($forward)); + my $objn = basename($obj); + my $srcs = + join(", ", + map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}}); + my $incs = + "/INCLUDE=(".join(",", + map { + file_name_is_absolute($_) + ? $_ : catdir($backward,$_) + } @{$args{incs}}).")"; + my $before = $unified_info{before}->{$obj.".OBJ"} || "\@ !"; + my $after = $unified_info{after}->{$obj.".OBJ"} || "\@ !"; + + return <<"EOF"; +$obj.OBJ : $deps + ${before} + SET DEFAULT $forward + \$(CC) \$(CFLAGS)${incs} /OBJECT=${objd}${objn}.OBJ /REPOSITORY=$backward $srcs + SET DEFAULT $backward + ${after} + - PURGE $obj.OBJ +EOF + } + sub libobj2shlib { + my %args = @_; + my $lib = $args{lib}; + my $shlib = $args{shlib}; + my $libd = dirname($lib); + my $libn = basename($lib); + (my $mkdef_key = $libn) =~ s/^${osslprefix_q}lib//i; + my @deps = map { + $config{no_shared} ? $_.".OLB" + : $unified_info{sharednames}->{$_}.".EXE"; } @{$args{deps}}; + my $deps = join(", -\n\t\t", @deps); + my $shlib_target = $config{no_shared} ? "" : $target{shared_target}; + my $ordinalsfile = defined($args{ordinals}) ? $args{ordinals}->[1] : ""; + my $engine_opt = abs2rel(rel2abs(catfile($config{sourcedir}, + "VMS", "engine.opt")), + rel2abs($config{builddir})); + my $mkdef_pl = abs2rel(rel2abs(catfile($config{sourcedir}, + "util", "mkdef.pl")), + rel2abs($config{builddir})); + my $translatesyms_pl = abs2rel(rel2abs(catfile($config{sourcedir}, + "VMS", "translatesyms.pl")), + rel2abs($config{builddir})); + # The "[]" hack is because in .OPT files, each line inherits the + # previous line's file spec as default, so if no directory spec + # is present in the current line and the previous line has one that + # doesn't apply, you're in for a surprise. + my $write_opt = + join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_; + $x =~ s|(\.EXE)|$1/SHARE|; + $x =~ s|(\.LIB)|$1/LIB|; + "WRITE OPT_FILE \"$x\"" } @deps) + || "\@ !"; + return <<"EOF"; +$shlib.EXE : $lib.OLB $deps $ordinalsfile + IF "$mkdef_key" .EQS. "ssl" .OR. "$mkdef_key" .EQS. "crypto" THEN - + \$(PERL) $mkdef_pl "$mkdef_key" "VMS" > $shlib.SYMVEC-tmp + IF "$mkdef_key" .EQS. "ssl" .OR. "$mkdef_key" .EQS. "crypto" THEN - + \$(PERL) $translatesyms_pl \$(BUILDDIR)CXX\$DEMANGLER_DB. < $shlib.SYMVEC-tmp > $shlib.SYMVEC + OPEN/WRITE/SHARE=READ OPT_FILE $shlib.OPT + WRITE OPT_FILE "IDENTIFICATION=""V$config{version}""" + IF "$mkdef_key" .NES. "ssl" .AND. "$mkdef_key" .NES. "crypto" THEN - + TYPE $engine_opt /OUTPUT=OPT_FILE: + IF "$mkdef_key" .EQS. "ssl" .OR. "$mkdef_key" .EQS. "crypto" THEN - + TYPE $shlib.SYMVEC /OUTPUT=OPT_FILE: + WRITE OPT_FILE "$lib.OLB/LIBRARY" + $write_opt ! Comment to protect from empty line + CLOSE OPT_FILE + LINK /MAP=$shlib.MAP /FULL/SHARE=$shlib.EXE $shlib.OPT/OPT \$(EX_LIBS) + - DELETE $shlib.SYMVEC;* + - PURGE $shlib.EXE,$shlib.OPT,$shlib.MAP +EOF + } + sub obj2dynlib { + my %args = @_; + my $lib = $args{lib}; + my $libd = dirname($lib); + my $libn = basename($lib); + (my $libn_nolib = $libn) =~ s/^lib//; + my @objs = map { "$_.OBJ" } @{$args{objs}}; + my @deps = map { + $config{no_shared} ? $_.".OLB" + : $unified_info{sharednames}->{$_}.".EXE"; } @{$args{deps}}; + my $deps = join(", -\n\t\t", @objs, @deps); + my $shlib_target = $config{no_shared} ? "" : $target{shared_target}; + my $engine_opt = abs2rel(rel2abs(catfile($config{sourcedir}, + "VMS", "engine.opt")), + rel2abs($config{builddir})); + # The "[]" hack is because in .OPT files, each line inherits the + # previous line's file spec as default, so if no directory spec + # is present in the current line and the previous line has one that + # doesn't apply, you're in for a surprise. + my $write_opt = + join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_; + "WRITE OPT_FILE \"$x" } @objs). + "\"\n\t". + join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_; + $x =~ s|(\.EXE)|$1/SHARE|; + $x =~ s|(\.LIB)|$1/LIB|; + "WRITE OPT_FILE \"$x\"" } @deps) + || "\@ !"; + return <<"EOF"; +$lib.EXE : $deps + OPEN/WRITE/SHARE=READ OPT_FILE $lib.OPT + TYPE $engine_opt /OUTPUT=OPT_FILE: + $write_opt + CLOSE OPT_FILE + LINK /MAP=$lib.MAP /FULL/SHARE=$lib.EXE $lib.OPT/OPT \$(EX_LIBS) + - PURGE $lib.EXE,$lib.OPT,$lib.MAP +EOF + } + sub obj2lib { + my %args = @_; + my $lib = $args{lib}; + my $objs = join(", -\n\t\t", map { $_.".OBJ" } (@{$args{objs}})); + my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib.OLB $_.OBJ" } + @{$args{objs}})); + return <<"EOF"; +$lib.OLB : $objs + LIBRARY/CREATE/OBJECT $lib + $fill_lib + - PURGE $lib.OLB +EOF + } + sub obj2bin { + my %args = @_; + my $bin = $args{bin}; + my $bind = dirname($bin); + my $binn = basename($bin); + my @objs = map { "$_.OBJ" } @{$args{objs}}; + my @deps = map { + $config{no_shared} ? $_.".OLB" + : $unified_info{sharednames}->{$_}.".EXE"; } @{$args{deps}}; + my $deps = join(", -\n\t\t", @objs, @deps); + # The "[]" hack is because in .OPT files, each line inherits the + # previous line's file spec as default, so if no directory spec + # is present in the current line and the previous line has one that + # doesn't apply, you're in for a surprise. + my $write_opt = + join(",-\"\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_; + "WRITE OPT_FILE \"$x" } @objs). + "\"\n\t". + join("\n\t", map { my $x = $_ =~ /\[/ ? $_ : "[]".$_; + $x =~ s|(\.EXE)|$1/SHARE|; + $x =~ s|(\.OLB)|$1/LIB|; + "WRITE OPT_FILE \"$x\"" } @deps) + || "\@ !"; + return <<"EOF"; +$bin.EXE : $deps + OPEN/WRITE/SHARE=READ OPT_FILE $bin.OPT + $write_opt + CLOSE OPT_FILE + LINK/EXEC=$bin.EXE \$(LDFLAGS) $bin.OPT/OPT \$(EX_LIBS) + - PURGE $bin.EXE,$bin.OPT +EOF + } + sub in2script { + my %args = @_; + my $script = $args{script}; + return "" if grep { $_ eq $script } @{$args{sources}}; # No overwrite! + my $sources = join(" ", @{$args{sources}}); + my $dofile = abs2rel(rel2abs(catfile($config{sourcedir}, + "util", "dofile.pl")), + rel2abs($config{builddir})); + return <<"EOF"; +$script : $sources + \$(PERL) "-I\$(BUILDDIR)" "-Mconfigdata" $dofile $sources > $script + SET FILE/PROT=(S:RWED,O:RWED,G:RE,W:RE) $script + PURGE $script +EOF + } + "" # Important! This becomes part of the template result. +-} diff --git a/VMS/engine.opt b/VMS/engine.opt new file mode 100644 index 0000000000..1c73c8005a --- /dev/null +++ b/VMS/engine.opt @@ -0,0 +1,2 @@ +CASE_SENSITIVE=YES +SYMBOL_VECTOR=(bind_engine=PROCEDURE,v_check=PROCEDURE) diff --git a/VMS/openssl_shutdown.com.in b/VMS/openssl_shutdown.com.in new file mode 100644 index 0000000000..85cc26da3b --- /dev/null +++ b/VMS/openssl_shutdown.com.in @@ -0,0 +1,59 @@ +$ ! OpenSSL shutdown script +$ ! +$ ! This script deassigns the logical names used by the installation +$ ! of OpenSSL. It can do so at any level, defined by P1. +$ ! |