| Age | Commit message (Collapse) | Author |
|---|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
[packet.c ssh_config.5 sshd_config.5]
add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
that change the packet format and compute the MAC over the encrypted
message (including the packet size) instead of the plaintext data;
these EtM modes are considered more secure and used by default.
feedback and ok djm@
|
|
|
|
[myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c]
add umac128 variant; ok djm@ at n2k12
(note: further Makefile work is required)
|
|
|
|
[mac.c myproposal.h ssh_config.5 sshd_config.5]
Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
from draft6 of the spec and will not be in the RFC when published. Patch
from mdb at juniper net via bz#2023, ok markus.
|
|
OpenSSL 0.9.7. ok djm
|
|
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5]
Add new SHA256 and SHA512 based HMAC modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt
Patch from mdb AT juniper.net; feedback and ok markus@
|
|
#define that was causing diffie-hellman-group-exchange-sha256 to be
incorrectly disabled
|
|
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
|
|
[myproposal.h]
prefer ECDH in a 256 bit curve field; prompted by naddy@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c]
[auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c]
[sshconnect.c sshconnect2.c sshd.c]
revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the
following changes:
move the nonce field to the beginning of the certificate where it can
better protect against chosen-prefix attacks on the signature hash
Rename "constraints" field to "critical options"
Add a new non-critical "extensions" field
Add a serial number
The older format is still support for authentication and cert generation
(use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate)
ok markus@
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[myproposal.h]
prefer CTR modes and revised arcfour (i.e w/ discard) modes to CBC
modes; ok markus@
|
|
[kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
compared to hmac-md5. Represents a different approach to message
authentication to that of HMAC that may be beneficial if HMAC based on
one of its underlying hash algorithms is found to be vulnerable to a
new attack. http://www.ietf.org/rfc/rfc4418.txt
in conjunction with and OK djm@
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[kex.h myproposal.h]
spacing
|
|
sha256 when openssl < 0.9.7. Patch from djm@. Corrections/testing by me.
|
|
[kex.c kex.h monitor.c myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
Implement the diffie-hellman-group-exchange-sha256 key exchange method
using the SHA256 code in libc (and wrapper to make it into an OpenSSL
EVP), interop tested against CVS PuTTY
NB. no portability bits committed yet
|
|
[kex.c kex.h myproposal.h packet.c packet.h servconf.c session.c]
[sshconnect2.c sshd.c sshd_config sshd_config.5]
add a new compression method that delays compression until the user
has been authenticated successfully and set compression to 'delayed'
for sshd.
this breaks older openssh clients (< 3.5) if they insist on
compression, so you have to re-enable compression in sshd_config.
ok djm@
|
|
[cipher.c myproposal.h ssh.1 ssh_config.5 sshd_config.5]
add support for draft-harris-ssh-arcfour-fixes-02 improved arcfour modes;
ok markus@
|
|
[dh.c dh.h kex.c kex.h kexdhc.c kexdhs.c monitor.c myproposal.h]
[ssh-keyscan.c sshconnect2.c sshd.c]
implement diffie-hellman-group14-sha1 kex method (trivial extension to
existing diffie-hellman-group1-sha1); ok markus@
|
|
[cipher.c cipher-ctr.c myproposal.h]
experimental support for aes-ctr modes from
http://www.ietf.org/internet-drafts/draft-ietf-secsh-newmodes-00.txt
ok djm@
|
|
[cipher.c myproposal.h]
re-add rijndael-cbc@lysator.liu.se for MacSSH; ash@lab.poc.net
|
|
[cipher.c compat.c myproposal.h]
remove "rijndael-*", just use "aes-" since this how rijndael is called
in the drafts; ok stevesk@
|
|
|
|
myproposal.h, ssh_prng_cmds.in, and openbsd-compat/Makefile.in.
Added openbsd-compat/bsd-cray.c. Rest will be merged after
approval. Selective patches from William L. Jones
<jones@mail.utexas.edu>
|
|
[myproposal.h ssh.1]
switch to aes128-cbc/hmac-md5 by default in SSH2 -- faster;
provos & markus ok
|
|
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
|
|
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h
groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h
key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h
radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1
ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config
sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h]
$OpenBSD$
|
|
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
|
|
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
|
|
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
|
|
- markus@cvs.openbsd.org
[session.c]
make x11-fwd work w/ localhost (xauth add host/unix:11)
[cipher.c compat.c readconf.c servconf.c]
check strtok() != NULL; ok niels@
[key.c]
fix key_read() for uuencoded keys w/o '='
[serverloop.c]
group ssh1 vs. ssh2 in serverloop
[kex.c kex.h myproposal.h sshconnect2.c sshd.c]
split kexinit/kexdh, factor out common code
[readconf.c ssh.1 ssh.c]
forwardagent defaults to no, add ssh -A
- theo@cvs.openbsd.org
[session.c]
just some line shortening
|
|
- markus@cvs.openbsd.org
[cipher.h myproposal.h readconf.c readconf.h servconf.c ssh.1 ssh.c]
[ssh.h sshconnect1.c sshconnect2.c sshd.8]
- complain about invalid ciphers in SSH1 (e.g. arcfour is SSH2 only)
- hugh@cvs.openbsd.org
[ssh.1]
- zap typo
[ssh-keygen.1]
- One last nit fix. (markus approved)
[sshd.8]
- some markus certified spelling adjustments
- markus@cvs.openbsd.org
[auth2.c channels.c clientloop.c compat compat.h dsa.c kex.c]
[sshconnect2.c ]
- bug compat w/ ssh-2.0.13 x11, split out bugs
[nchan.c]
- no drain if ibuf_empty, fixes x11fwd problems; tests by fries@
[ssh-keygen.c]
- handle escapes in real and original key format, ok millert@
[version.h]
- OpenSSH-2.1
|
|
- [channels.c]
close efd on eof
- [clientloop.c compat.c ssh.c sshconnect.c myproposal.h]
ssh2 client implementation, interops w/ ssh.com and lsh servers.
- [sshconnect.c]
missing free.
- [authfile.c cipher.c cipher.h packet.c sshconnect.c sshd.c]
remove unused argument, split cipher_mask()
- [clientloop.c]
re-order: group ssh1 vs. ssh2
- Make Redhat spec require openssl >= 0.9.5a
|
