diff options
author | Damien Miller <djm@mindrot.org> | 1999-11-25 00:26:21 +1100 |
---|---|---|
committer | Damien Miller <djm@mindrot.org> | 1999-11-25 00:26:21 +1100 |
commit | 95def09838fc61b37b6ea7cd5c234a465b4b129b (patch) | |
tree | 042744f76f40a326b873cb1c3690a6d7d966bc3e /ssh.h | |
parent | 4d2f15f895f4c795afc008aeff3fd2ceffbc44f4 (diff) |
- Merged very large OpenBSD source code reformat
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
Diffstat (limited to 'ssh.h')
-rw-r--r-- | ssh.h | 351 |
1 files changed, 182 insertions, 169 deletions
@@ -1,19 +1,19 @@ /* - -ssh.h - -Author: Tatu Ylonen <ylo@cs.hut.fi> - -Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland - All rights reserved - -Created: Fri Mar 17 17:09:37 1995 ylo - -Generic header file for ssh. - -*/ - -/* RCSID("$Id: ssh.h,v 1.14 1999/11/21 02:23:53 damien Exp $"); */ + * + * ssh.h + * + * Author: Tatu Ylonen <ylo@cs.hut.fi> + * + * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland + * All rights reserved + * + * Created: Fri Mar 17 17:09:37 1995 ylo + * + * Generic header file for ssh. + * + */ + +/* RCSID("$Id: ssh.h,v 1.15 1999/11/24 13:26:23 damien Exp $"); */ #ifndef SSH_H #define SSH_H @@ -25,7 +25,7 @@ Generic header file for ssh. #include "rsa.h" #include "cipher.h" -/* The default cipher used if IDEA is not supported by the remote host. +/* The default cipher used if IDEA is not supported by the remote host. It is recommended that this be one of the mandatory ciphers (DES, 3DES), though that is not required. */ #define SSH_FALLBACK_CIPHER SSH_CIPHER_3DES @@ -59,7 +59,9 @@ Generic header file for ssh. #define ETCDIR "/etc" #endif /* ETCDIR */ +#ifndef PIDDIR #define PIDDIR "/var/run" +#endif /* PIDDIR */ /* System-wide file containing host keys of known hosts. This file should be world-readable. */ @@ -76,15 +78,15 @@ only by root, whereas ssh_config should be world-readable. */ #define HOST_CONFIG_FILE ETCDIR "/ssh_config" #ifndef SSH_PROGRAM -#define SSH_PROGRAM "/usr/bin/ssh" +#define SSH_PROGRAM "/usr/bin/ssh" #endif /* SSH_PROGRAM */ #ifndef LOGIN_PROGRAM -#define LOGIN_PROGRAM "/usr/bin/login" +#define LOGIN_PROGRAM "/usr/bin/login" #endif /* LOGIN_PROGRAM */ #ifndef ASKPASS_PROGRAM -#define ASKPASS_PROGRAM "/usr/lib/ssh/ssh-askpass" +#define ASKPASS_PROGRAM "/usr/lib/ssh/ssh-askpass" #endif /* ASKPASS_PROGRAM */ /* The process id of the daemon listening for connections is saved @@ -100,7 +102,7 @@ only by root, whereas ssh_config should be world-readable. */ not contain anything particularly secret. */ #define SSH_USER_HOSTFILE "~/.ssh/known_hosts" -/* Name of the default file containing client-side authentication key. +/* Name of the default file containing client-side authentication key. This file should only be readable by the user him/herself. */ #define SSH_CLIENT_IDENTITY ".ssh/identity" @@ -116,7 +118,7 @@ only by root, whereas ssh_config should be world-readable. */ readable by anyone but the user him/herself, but does not contain anything particularly secret. If the user\'s home directory resides on an NFS volume where root is mapped to nobody, this may need to be - world-readable. (This file is read by the daemon which is running as + world-readable. (This file is read by the daemon which is running as root.) */ #define SSH_USER_PERMITTED_KEYS ".ssh/authorized_keys" @@ -130,7 +132,7 @@ only by root, whereas ssh_config should be world-readable. */ /* Ssh-only version of /etc/hosts.equiv. */ #define SSH_HOSTS_EQUIV ETCDIR "/shosts.equiv" -/* Additionally, the daemon may use ~/.rhosts and /etc/hosts.equiv if +/* Additionally, the daemon may use ~/.rhosts and /etc/hosts.equiv if rhosts authentication is enabled. */ /* Name of the environment variable containing the pathname of the @@ -145,7 +147,7 @@ only by root, whereas ssh_config should be world-readable. */ many bits. This is to make double encryption with rsaref work. */ #define SSH_KEY_BITS_RESERVED 128 -/* Length of the session key in bytes. (Specified as 256 bits in the +/* Length of the session key in bytes. (Specified as 256 bits in the protocol.) */ #define SSH_SESSION_KEY_LENGTH 32 @@ -158,21 +160,23 @@ only by root, whereas ssh_config should be world-readable. */ #define SSH_AUTH_RSA 2 #define SSH_AUTH_PASSWORD 3 #define SSH_AUTH_RHOSTS_RSA 4 - /* 5 is TIS */ +#define SSH_AUTH_TIS 5 #define SSH_AUTH_KERBEROS 6 #define SSH_PASS_KERBEROS_TGT 7 - /* 8 to 15 are reserved */ + /* 8 to 15 are reserved */ #define SSH_PASS_AFS_TOKEN 21 /* Protocol flags. These are bit masks. */ -#define SSH_PROTOFLAG_SCREEN_NUMBER 1 /* X11 forwarding includes screen */ -#define SSH_PROTOFLAG_HOST_IN_FWD_OPEN 2 /* forwarding opens contain host */ +#define SSH_PROTOFLAG_SCREEN_NUMBER 1 /* X11 forwarding includes + * screen */ +#define SSH_PROTOFLAG_HOST_IN_FWD_OPEN 2 /* forwarding opens contain + * host */ /* Definition of message types. New values can be added, but old values should not be removed or without careful consideration of the consequences for compatibility. The maximum value is 254; value 255 is reserved for future extension. */ -/* Message name */ /* msg code */ /* arguments */ + /* Message name *//* msg code *//* arguments */ #define SSH_MSG_NONE 0 /* no message */ #define SSH_MSG_DISCONNECT 1 /* cause (string) */ #define SSH_SMSG_PUBLIC_KEY 2 /* ck,msk,srvk,hostk */ @@ -212,10 +216,9 @@ only by root, whereas ssh_config should be world-readable. */ #define SSH_MSG_DEBUG 36 /* string */ #define SSH_CMSG_REQUEST_COMPRESSION 37 /* level 1-9 (int) */ #define SSH_CMSG_MAX_PACKET_SIZE 38 /* size 4k-1024k (int) */ -#define SSH_CMSG_AUTH_TIS 39 /* this is proto-1.5, but we ignore TIS */ -#define SSH_SMSG_AUTH_TIS_CHALLENGE 40 -#define SSH_CMSG_AUTH_TIS_RESPONSE 41 - +#define SSH_CMSG_AUTH_TIS 39 /* we use this for s/key */ +#define SSH_SMSG_AUTH_TIS_CHALLENGE 40 /* challenge (string) */ +#define SSH_CMSG_AUTH_TIS_RESPONSE 41 /* response (string) */ #define SSH_CMSG_AUTH_KERBEROS 42 /* (KTEXT) */ #define SSH_SMSG_AUTH_KERBEROS_RESPONSE 43 /* (KTEXT) */ #define SSH_CMSG_HAVE_KERBEROS_TGT 44 /* credentials (s) */ @@ -223,74 +226,79 @@ only by root, whereas ssh_config should be world-readable. */ /*------------ definitions for login.c -------------*/ -/* Returns the time when the user last logged in. Returns 0 if the - information is not available. This must be called before record_login. +/* Returns the time when the user last logged in. Returns 0 if the + information is not available. This must be called before record_login. The host from which the user logged in is stored in buf. */ -unsigned long get_last_login_time(uid_t uid, const char *logname, - char *buf, unsigned int bufsize); +unsigned long +get_last_login_time(uid_t uid, const char *logname, + char *buf, unsigned int bufsize); /* Records that the user has logged in. This does many things normally done by login(1). */ -void record_login(int pid, const char *ttyname, const char *user, uid_t uid, - const char *host, struct sockaddr_in *addr); +void +record_login(int pid, const char *ttyname, const char *user, uid_t uid, + const char *host, struct sockaddr_in * addr); /* Records that the user has logged out. This does many thigs normally done by login(1) or init. */ -void record_logout(int pid, const char *ttyname); +void record_logout(int pid, const char *ttyname); /*------------ definitions for sshconnect.c ----------*/ /* Opens a TCP/IP connection to the remote server on the given host. If port is 0, the default port will be used. If anonymous is zero, - a privileged port will be allocated to make the connection. - This requires super-user privileges if anonymous is false. + a privileged port will be allocated to make the connection. + This requires super-user privileges if anonymous is false. Connection_attempts specifies the maximum number of tries, one per second. This returns true on success, and zero on failure. If the connection is successful, this calls packet_set_connection for the connection. */ -int ssh_connect(const char *host, struct sockaddr_in *hostaddr, - int port, int connection_attempts, - int anonymous, uid_t original_real_uid, - const char *proxy_command); +int +ssh_connect(const char *host, struct sockaddr_in * hostaddr, + int port, int connection_attempts, + int anonymous, uid_t original_real_uid, + const char *proxy_command); /* Starts a dialog with the server, and authenticates the current user on the server. This does not need any extra privileges. The basic connection - to the server must already have been established before this is called. - If login fails, this function prints an error and never returns. + to the server must already have been established before this is called. + If login fails, this function prints an error and never returns. This initializes the random state, and leaves it initialized (it will also have references from the packet module). */ -void ssh_login(int host_key_valid, RSA *host_key, const char *host, - struct sockaddr_in *hostaddr, uid_t original_real_uid); +void +ssh_login(int host_key_valid, RSA * host_key, const char *host, + struct sockaddr_in * hostaddr, uid_t original_real_uid); /*------------ Definitions for various authentication methods. -------*/ /* Tries to authenticate the user using the .rhosts file. Returns true if authentication succeeds. If ignore_rhosts is non-zero, this will not consider .rhosts and .shosts (/etc/hosts.equiv will still be used). */ -int auth_rhosts(struct passwd *pw, const char *client_user); +int auth_rhosts(struct passwd * pw, const char *client_user); /* Tries to authenticate the user using the .rhosts file and the host using its host key. Returns true if authentication succeeds. */ -int auth_rhosts_rsa(struct passwd *pw, const char *client_user, - BIGNUM *client_host_key_e, BIGNUM *client_host_key_n); +int +auth_rhosts_rsa(struct passwd * pw, const char *client_user, + BIGNUM * client_host_key_e, BIGNUM * client_host_key_n); /* Tries to authenticate the user using password. Returns true if authentication succeeds. */ -int auth_password(struct passwd *pw, const char *password); +int auth_password(struct passwd * pw, const char *password); /* Performs the RSA authentication dialog with the client. This returns 0 if the client could not be authenticated, and 1 if authentication was successful. This may exit if there is a serious protocol violation. */ -int auth_rsa(struct passwd *pw, BIGNUM *client_n); +int auth_rsa(struct passwd * pw, BIGNUM * client_n); /* Parses an RSA key (number of bits, e, n) from a string. Moves the pointer over the key. Skips any whitespace at the beginning and at end. */ -int auth_rsa_read_key(char **cpp, unsigned int *bitsp, BIGNUM *e, BIGNUM *n); +int auth_rsa_read_key(char **cpp, unsigned int *bitsp, BIGNUM * e, BIGNUM * n); /* Returns the name of the machine at the other end of the socket. The returned string should be freed by the caller. */ -char *get_remote_hostname(int socket); +char *get_remote_hostname(int socket); /* Return the canonical name of the host in the other side of the current connection (as returned by packet_get_connection). The host name is @@ -302,296 +310,301 @@ const char *get_canonical_hostname(void); const char *get_remote_ipaddr(void); /* Returns the port number of the peer of the socket. */ -int get_peer_port(int sock); +int get_peer_port(int sock); /* Returns the port number of the remote host. */ -int get_remote_port(void); +int get_remote_port(void); /* Tries to match the host name (which must be in all lowercase) against the - comma-separated sequence of subpatterns (each possibly preceded by ! to + comma-separated sequence of subpatterns (each possibly preceded by ! to indicate negation). Returns true if there is a positive match; zero otherwise. */ -int match_hostname(const char *host, const char *pattern, unsigned int len); +int match_hostname(const char *host, const char *pattern, unsigned int len); /* Checks whether the given host is already in the list of our known hosts. Returns HOST_OK if the host is known and has the specified key, HOST_NEW if the host is not known, and HOST_CHANGED if the host is known but used to have a different host key. The host must be in all lowercase. */ -typedef enum { HOST_OK, HOST_NEW, HOST_CHANGED } HostStatus; -HostStatus check_host_in_hostfile(const char *filename, const char *host, - BIGNUM *e, BIGNUM *n, BIGNUM *ke, BIGNUM *kn); +typedef enum { + HOST_OK, HOST_NEW, HOST_CHANGED +} HostStatus; +HostStatus +check_host_in_hostfile(const char *filename, const char *host, + BIGNUM * e, BIGNUM * n, BIGNUM * ke, BIGNUM * kn); /* Appends an entry to the host file. Returns false if the entry could not be appended. */ -int add_host_to_hostfile(const char *filename, const char *host, - BIGNUM *e, BIGNUM *n); +int +add_host_to_hostfile(const char *filename, const char *host, + BIGNUM * e, BIGNUM * n); /* Performs the RSA authentication challenge-response dialog with the client, and returns true (non-zero) if the client gave the correct answer to our challenge; returns zero if the client gives a wrong answer. */ -int auth_rsa_challenge_dialog(BIGNUM *e, BIGNUM *n); +int auth_rsa_challenge_dialog(BIGNUM * e, BIGNUM * n); -/* Reads a passphrase from /dev/tty with echo turned off. Returns the - passphrase (allocated with xmalloc). Exits if EOF is encountered. +/* Reads a passphrase from /dev/tty with echo turned off. Returns the + passphrase (allocated with xmalloc). Exits if EOF is encountered. If from_stdin is true, the passphrase will be read from stdin instead. */ -char *read_passphrase(const char *prompt, int from_stdin); +char *read_passphrase(const char *prompt, int from_stdin); /* Saves the authentication (private) key in a file, encrypting it with passphrase. The identification of the file (lowest 64 bits of n) will precede the key to provide identification of the key without needing a passphrase. */ -int save_private_key(const char *filename, const char *passphrase, - RSA *private_key, const char *comment); +int +save_private_key(const char *filename, const char *passphrase, + RSA * private_key, const char *comment); -/* Loads the public part of the key file (public key and comment). +/* Loads the public part of the key file (public key and comment). Returns 0 if an error occurred; zero if the public key was successfully read. The comment of the key is returned in comment_return if it is non-NULL; the caller must free the value with xfree. */ -int load_public_key(const char *filename, RSA *pub, - char **comment_return); +int +load_public_key(const char *filename, RSA * pub, + char **comment_return); /* Loads the private key from the file. Returns 0 if an error is encountered (file does not exist or is not readable, or passphrase is bad). - This initializes the private key. The comment of the key is returned - in comment_return if it is non-NULL; the caller must free the value + This initializes the private key. The comment of the key is returned + in comment_return if it is non-NULL; the caller must free the value with xfree. */ -int load_private_key(const char *filename, const char *passphrase, - RSA *private_key, char **comment_return); +int +load_private_key(const char *filename, const char *passphrase, + RSA * private_key, char **comment_return); /*------------ Definitions for logging. -----------------------*/ /* Supported syslog facilities and levels. */ -typedef enum -{ - SYSLOG_FACILITY_DAEMON, - SYSLOG_FACILITY_USER, - SYSLOG_FACILITY_AUTH, - SYSLOG_FACILITY_LOCAL0, - SYSLOG_FACILITY_LOCAL1, - SYSLOG_FACILITY_LOCAL2, - SYSLOG_FACILITY_LOCAL3, - SYSLOG_FACILITY_LOCAL4, - SYSLOG_FACILITY_LOCAL5, - SYSLOG_FACILITY_LOCAL6, - SYSLOG_FACILITY_LOCAL7 -} SyslogFacility; - -typedef enum -{ - SYSLOG_LEVEL_QUIET, - SYSLOG_LEVEL_FATAL, - SYSLOG_LEVEL_ERROR, - SYSLOG_LEVEL_INFO, - SYSLOG_LEVEL_CHAT, - SYSLOG_LEVEL_DEBUG -} LogLevel; - +typedef enum { + SYSLOG_FACILITY_DAEMON, + SYSLOG_FACILITY_USER, + SYSLOG_FACILITY_AUTH, + SYSLOG_FACILITY_LOCAL0, + SYSLOG_FACILITY_LOCAL1, + SYSLOG_FACILITY_LOCAL2, + SYSLOG_FACILITY_LOCAL3, + SYSLOG_FACILITY_LOCAL4, + SYSLOG_FACILITY_LOCAL5, + SYSLOG_FACILITY_LOCAL6, + SYSLOG_FACILITY_LOCAL7 +} SyslogFacility; + +typedef enum { + SYSLOG_LEVEL_QUIET, + SYSLOG_LEVEL_FATAL, + SYSLOG_LEVEL_ERROR, + SYSLOG_LEVEL_INFO, + SYSLOG_LEVEL_VERBOSE, + SYSLOG_LEVEL_DEBUG +} LogLevel; /* Initializes logging. */ -void log_init(char *av0, LogLevel level, SyslogFacility facility, int on_stderr); +void log_init(char *av0, LogLevel level, SyslogFacility facility, int on_stderr); /* Logging implementation, depending on server or client */ -void do_log(LogLevel level, const char *fmt, va_list args); +void do_log(LogLevel level, const char *fmt, va_list args); /* name to facility/level */ SyslogFacility log_facility_number(char *name); LogLevel log_level_number(char *name); /* Output a message to syslog or stderr */ -void fatal(const char *fmt, ...); -void error(const char *fmt, ...); -void log(const char *fmt, ...); -void chat(const char *fmt, ...); -void debug(const char *fmt, ...); +void fatal(const char *fmt,...) __attribute__((format(printf, 1, 2))); +void error(const char *fmt,...) __attribute__((format(printf, 1, 2))); +void log(const char *fmt,...) __attribute__((format(printf, 1, 2))); +void verbose(const char *fmt,...) __attribute__((format(printf, 1, 2))); +void debug(const char *fmt,...) __attribute__((format(printf, 1, 2))); /* same as fatal() but w/o logging */ -void fatal_cleanup(void); +void fatal_cleanup(void); -/* Registers a cleanup function to be called by fatal()/fatal_cleanup() before exiting. +/* Registers a cleanup function to be called by fatal()/fatal_cleanup() before exiting. It is permissible to call fatal_remove_cleanup for the function itself from the function. */ -void fatal_add_cleanup(void (*proc)(void *context), void *context); +void fatal_add_cleanup(void (*proc) (void *context), void *context); /* Removes a cleanup function to be called at fatal(). */ -void fatal_remove_cleanup(void (*proc)(void *context), void *context); +void fatal_remove_cleanup(void (*proc) (void *context), void *context); /*---------------- definitions for channels ------------------*/ /* Sets specific protocol options. */ -void channel_set_options(int hostname_in_open); +void channel_set_options(int hostname_in_open); /* Allocate a new channel object and set its type and socket. Remote_name must have been allocated with xmalloc; this will free it when the channel is freed. */ -int channel_allocate(int type, int sock, char *remote_name); +int channel_allocate(int type, int sock, char *remote_name); /* Free the channel and close its socket. */ -void channel_free(int channel); +void channel_free(int channel); /* Add any bits relevant to channels in select bitmasks. */ -void channel_prepare_select(fd_set *readset, fd_set *writeset); +void channel_prepare_select(fd_set * readset, fd_set * writeset); /* After select, perform any appropriate operations for channels which have events pending. */ -void channel_after_select(fd_set *readset, fd_set *writeset); +void channel_after_select(fd_set * readset, fd_set * writeset); /* If there is data to send to the connection, send some of it now. */ -void channel_output_poll(void); +void channel_output_poll(void); /* This is called when a packet of type CHANNEL_DATA has just been received. The message type has already been consumed, but channel number and data is still there. */ -void channel_input_data(int payload_len); +void channel_input_data(int payload_len); /* Returns true if no channel has too much buffered data. */ -int channel_not_very_much_buffered_data(void); +int channel_not_very_much_buffered_data(void); /* This is called after receiving CHANNEL_CLOSE. */ -void channel_input_close(void); +void channel_input_close(void); /* This is called after receiving CHANNEL_CLOSE_CONFIRMATION. */ -void channel_input_close_confirmation(void); +void channel_input_close_confirmation(void); /* This is called after receiving CHANNEL_OPEN_CONFIRMATION. */ -void channel_input_open_confirmation(void); +void channel_input_open_confirmation(void); /* This is called after receiving CHANNEL_OPEN_FAILURE from the other side. */ -void channel_input_open_failure(void); +void channel_input_open_failure(void); /* This closes any sockets that are listening for connections; this removes any unix domain sockets. */ -void channel_stop_listening(void); +void channel_stop_listening(void); /* Closes the sockets of all channels. This is used to close extra file descriptors after a fork. */ -void channel_close_all(void); +void channel_close_all(void); /* Returns the maximum file descriptor number used by the channels. */ -int channel_max_fd(void); +int channel_max_fd(void); /* Returns true if there is still an open channel over the connection. */ -int channel_still_open(void); +int channel_still_open(void); /* Returns a string containing a list of all open channels. The list is suitable for displaying to the user. It uses crlf instead of newlines. The caller should free the string with xfree. */ -char *channel_open_message(void); +char *channel_open_message(void); /* Initiate forwarding of connections to local port "port" through the secure channel to host:port from remote side. This never returns if there was an error. */ -void channel_request_local_forwarding(int port, const char *host, - int remote_port); +void +channel_request_local_forwarding(int port, const char *host, + int remote_port); /* Initiate forwarding of connections to port "port" on remote host through the secure channel to host:port from local side. This never returns if there was an error. This registers that open requests for that port are permitted. */ -void channel_request_remote_forwarding(int port, const char *host, - int remote_port); +void +channel_request_remote_forwarding(int port, const char *host, + int remote_port); /* Permits opening to any host/port in SSH_MSG_PORT_OPEN. This is usually called by the server, because the user could connect to any port anyway, and the server has no way to know but to trust the client anyway. */ -void channel_permit_all_opens(void); +void channel_permit_all_opens(void); /* This is called after receiving CHANNEL_FORWARDING_REQUEST. This initates listening for the port, and sends back a success reply (or disconnect - message if there was an error). This never returns if there was an + message if there was an error). This never returns if there was an error. */ -void channel_input_port_forward_request(int is_root); +void channel_input_port_forward_request(int is_root); /* This is called after receiving PORT_OPEN message. This attempts to connect to the given host:port, and sends back CHANNEL_OPEN_CONFIRMATION or CHANNEL_OPEN_FAILURE. */ -void channel_input_port_open(int payload_len); +void channel_input_port_open(int payload_len); /* Creates a port for X11 connections, and starts listening for it. Returns the display name, or NULL if an error was encountered. */ -char *x11_create_display(int screen); +char *x11_create_display(int screen); -/* Creates an internet domain socket for listening for X11 connections. +/* Creates an internet domain socket for listening for X11 connections. Returns a suitable value for the DISPLAY variable, or NULL if an error occurs. */ -char *x11_create_display_inet(int screen); +char *x11_create_display_inet(int screen); /* This is called when SSH_SMSG_X11_OPEN is received. The packet contains the remote channel number. We should do whatever we want, and respond with either SSH_MSG_OPEN_CONFIRMATION or SSH_MSG_OPEN_FAILURE. */ -void x11_input_open(int payload_len); +void x11_input_open(int payload_len); -/* Requests forwarding of X11 connections. This should be called on the +/* Requests forwarding of X11 connections. This should be called on the client only. */ -void x11_request_forwarding(void); +void x11_request_forwarding(void); /* Requests forwarding for X11 connections, with authentication spoofing. This should be called in the client only. */ -void x11_request_forwarding_with_spoofing(const char *proto, const char *data); +void x11_request_forwarding_with_spoofing(const char *proto, const char *data); /* Sends a message to the server to request authentication fd forwarding. */ -void auth_request_forwarding(void); +void auth_request_forwarding(void); /* Returns the name of the forwarded authentication socket. Returns NULL if there is no forwarded authentication socket. The returned value points to a static buffer. */ -char *auth_get_socket_name(void); +char *auth_get_socket_name(void); /* This if called to process SSH_CMSG_AGENT_REQUEST_FORWARDING on the server. This starts forwarding authentication requests. */ -void auth_input_request_forwarding(struct passwd *pw); +void auth_input_request_forwarding(struct passwd * pw); /* This is called to process an SSH_SMSG_AGENT_OPEN message. */ -void auth_input_open_request(void); +void auth_input_open_request(void); /* Returns true if the given string matches the pattern (which may contain ? and * as wildcards), and zero if it does not match. */ -int match_pattern(const char *s, const char *pattern); +int match_pattern(const char *s, const char *pattern); /* Expands tildes in the file name. Returns data allocated by xmalloc. Warning: this calls getpw*. */ -char *tilde_expand_filename(const char *filename, uid_t my_uid); +char *tilde_expand_filename(const char *filename, uid_t my_uid); /* Performs the interactive session. This handles data transmission between the client and the program. Note that the notion of stdin, stdout, and stderr in this function is sort of reversed: this function writes to stdin (of the child program), and reads from stdout and stderr (of the child program). */ -void server_loop(int pid, int fdin, int fdout, int fderr); +void server_loop(int pid, int fdin, int fdout, int fderr); /* Client side main loop for the interactive session. */ -int client_loop(int have_pty, int escape_char); +int client_loop(int have_pty, int escape_char); /* Linked list of custom environment strings (see auth-rsa.c). */ struct envstring { - struct envstring *next; - char *s; + struct envstring *next; + char *s; }; - #ifdef KRB4 #include <krb.h> /* Performs Kerberos v4 mutual authentication with the client. This returns 0 if the client could not be authenticated, and 1 if authentication was successful. This may exit if there is a serious protocol violation. */ -int auth_krb4(const char *server_user, KTEXT auth, char **client); -int krb4_init(uid_t uid); -void krb4_cleanup_proc(void *ignore); +int auth_krb4(const char *server_user, KTEXT auth, char **client); +int krb4_init(uid_t uid); +void krb4_cleanup_proc(void *ignore); #ifdef AFS #include <kafs.h> /* Accept passed Kerberos v4 ticket-granting ticket and AFS tokens. */ -int auth_kerberos_tgt(struct passwd *pw, const char *string); -int auth_afs_token(struct passwd *pw, const char *token_string); +int auth_kerberos_tgt(struct passwd * pw, const char *string); +int auth_afs_token(struct passwd * pw, const char *token_string); -int creds_to_radix(CREDENTIALS *creds, unsigned char *buf); -int radix_to_creds(const char *buf, CREDENTIALS *creds); -#endif /* AFS */ +int creds_to_radix(CREDENTIALS * creds, unsigned char *buf); +int radix_to_creds(const char *buf, CREDENTIALS * creds); +#endif /* AFS */ -#endif /* KRB4 */ +#endif /* KRB4 */ #ifdef SKEY #include <skey.h> -char *skey_fake_keyinfo(char *username); -#endif /* SKEY */ +char *skey_fake_keyinfo(char *username); +#endif /* SKEY */ -#endif /* SSH_H */ +#endif /* SSH_H */ |