From 9310bd15de5eed356f36bf3c5dcab0a2d5957a37 Mon Sep 17 00:00:00 2001 From: Frederik Rietdijk Date: Sat, 5 Mar 2016 18:01:23 -0500 Subject: Revert "Documentation: rewrite Python docs" --- doc/default.nix | 6 - doc/languages-frameworks/python.md | 668 ------------------------------------ doc/languages-frameworks/python.xml | 447 ++++++++++++++++++++++++ 3 files changed, 447 insertions(+), 674 deletions(-) delete mode 100644 doc/languages-frameworks/python.md create mode 100644 doc/languages-frameworks/python.xml (limited to 'doc') diff --git a/doc/default.nix b/doc/default.nix index 203555de131e..196b9e445390 100644 --- a/doc/default.nix +++ b/doc/default.nix @@ -45,10 +45,6 @@ stdenv.mkDerivation { + toDocbook { inputFile = ./introduction.md; outputFile = "introduction.xml"; - } - + toDocbook { - inputFile = ./languages-frameworks/python.md; - outputFile = "./languages-frameworks/python.xml"; useChapters = true; } + toDocbook { @@ -65,8 +61,6 @@ stdenv.mkDerivation { outputFile = "languages-frameworks/r.xml"; } + '' - cat -n languages-frameworks/python.xml - echo ${nixpkgsVersion} > .version xmllint --noout --nonet --xinclude --noxincludenode \ diff --git a/doc/languages-frameworks/python.md b/doc/languages-frameworks/python.md deleted file mode 100644 index d05cabac3ff6..000000000000 --- a/doc/languages-frameworks/python.md +++ /dev/null @@ -1,668 +0,0 @@ -# Python - -## User Guide - -Several versions of Python are available on Nix as well as a high amount of -packages. The default interpreter is CPython 2.7. - -### Using Python - -#### Installing Python and packages - -It is important to make a distinction between Python packages that are -used as libraries, and applications that are written in Python. - -Applications on Nix are installed typically into your user -profile imperatively using `nix-env -i`, and on NixOS declaratively by adding the -package name to `environment.systemPackages` in `/etc/nixos/configuration.nix`. -Dependencies such as libraries are automatically installed and should not be -installed explicitly. - -The same goes for Python applications and libraries. Python applications can be -installed in your profile, but Python libraries you would like to use to develop -cannot. If you do install libraries in your profile, then you will end up with -import errors. - -#### Python environments using `nix-shell` - -The recommended method for creating Python environments for development is with -`nix-shell`. Executing - -```sh -$ nix-shell -p python35Packages.numpy python35Packages.toolz -``` - -opens a Nix shell which has available the requested packages and dependencies. -Now you can launch the Python interpreter (which is itself a dependency) - -```sh -[nix-shell:~] python3 -``` - -If the packages were not available yet in the Nix store, Nix would download or -build them automatically. A convenient option with `nix-shell` is the `--run` -option, with which you can execute a command in the `nix-shell`. Let's say we -want the above environment and directly run the Python interpreter - -```sh -$ nix-shell -p python35Packages.numpy python35Packages.toolz --run "python3" -``` - -This way you can use the `--run` option also to directly run a script - -```sh -$ nix-shell -p python35Packages.numpy python35Packages.toolz --run "python3 myscript.py" -``` - -In fact, for this specific use case there is a more convenient method. You can -add a [shebang](https://en.wikipedia.org/wiki/Shebang_(Unix)) to your script -specifying which dependencies Nix shell needs. With the following shebang, you -can use `nix-shell myscript.py` and it will make available all dependencies and -run the script in the `python3` shell. - -```py -#! /usr/bin/env nix-shell -#! nix-shell -i python3 -p python3Packages.numpy - -import numpy - -print(numpy.__version__) -``` - -Likely you do not want to type your dependencies each and every time. What you -can do is write a simple Nix expression which sets up an environment for you, -requiring you only to type `nix-shell`. Say we want to have Python 3.5, `numpy` -and `toolz`, like before, in an environment. With a `shell.nix` file -containing - -```nix -with import {}; - -(pkgs.python35.buildEnv.override { - extraLibs = with pkgs.python35Packages; [ numpy toolz ]; -}).env -``` -executing `nix-shell` gives you again a Nix shell from which you can run Python. - -What's happening here? - -1. We begin with importing the Nix Packages collections. `import ` import the `` function, `{}` calls it and the `with` statement brings all attributes of `nixpkgs` in the local scope. Therefore we can now use `pkgs`. -2. Then we create a Python 3.5 environment with `pkgs.buildEnv`. Because we want to use it with a custom set of Python packages, we override it. -3. The `extraLibs` argument of the original `buildEnv` function can be used to specify which packages should be included. We want `numpy` and `toolz`. Again, we use the `with` statement to bring a set of attributes into the local scope. -4. And finally, for in interactive use we return the environment. - -### Developing with Python - - -Now that you know how to get a working Python environment on Nix, it is time to go forward and start actually developing with Python. -We will first have a look at how Python packages are packaged on Nix. Then, we will look how you can use development mode with your code. - -#### Python packaging on Nix - -On Nix all packages are built by functions. The main function in Nix for building Python packages is [`buildPythonPackage`](https://github.com/NixOS/nixpkgs/blob/master/pkgs/development/python-modules/generic/default.nix). -Let's see how we would build the `toolz` package. According to [`python-packages.nix`](https://raw.githubusercontent.com/NixOS/nixpkgs/master/pkgs/top-level/python-packages.nix) `toolz` is build using - -```nix -toolz = buildPythonPackage rec{ - name = "toolz-${version}"; - version = "0.7.4"; - - src = pkgs.fetchurl{ - url = "https://pypi.python.org/packages/source/t/toolz/toolz-${version}.tar.gz"; - sha256 = "43c2c9e5e7a16b6c88ba3088a9bfc82f7db8e13378be7c78d6c14a5f8ed05afd"; - }; - - meta = { - homepage = "http://github.com/pytoolz/toolz/"; - description = "List processing tools and functional utilities"; - license = licenses.bsd3; - maintainers = with maintainers; [ fridh ]; - }; -}; -``` - -What happens here? The function `buildPythonPackage` is called and as argument -it accepts a set. In this case the set is a recursive set ([`rec`](http://nixos.org/nix/manual/#sec-constructs)). -One of the arguments is the name of the package, which consists of a basename -(generally following the name on PyPi) and a version. Another argument, `src` -specifies the source, which in this case is fetched from an url. `fetchurl` not -only downloads the target file, but also validates its hash. Furthermore, we -specify some (optional) [meta information](http://nixos.org/nixpkgs/manual/#chap-meta). - -The output of the function is a derivation, which is an attribute with the name -`toolz` of the set `pythonPackages`. Actually, sets are created for all interpreter versions, -so `python27Packages`, `python34Packages`, `python35Packages` and `pypyPackages`. - -The above example works when you're directly working on -`pkgs/top-level/python-packages.nix` in the Nixpkgs repository. Often though, -you will want to test a Nix expression outside of the Nixpkgs tree. If you -create a `shell.nix` file with the following contents - -```nix -with import {}; - -pkgs.python35Packages.buildPythonPackage rec { - name = "toolz-${version}"; - version = "0.7.4"; - - src = pkgs.fetchurl{ - url = "https://pypi.python.org/packages/source/t/toolz/toolz-${version}.tar.gz"; - sha256 = "43c2c9e5e7a16b6c88ba3088a9bfc82f7db8e13378be7c78d6c14a5f8ed05afd"; - }; - - meta = { - homepage = "http://github.com/pytoolz/toolz/"; - description = "List processing tools and functional utilities"; - license = licenses.bsd3; - maintainers = with maintainers; [ fridh ]; - }; -} -``` - -and then execute `nix-shell` will result in an environment in which you can use -Python 3.5 and the `toolz` package. As you can see we had to explicitly mention -for which Python version we want to build a package. - -The above example considered only a single package. Generally you will want to use multiple packages. -If we create a `shell.nix` file with the following contents - -```nix -with import {}; - -( let - toolz = pkgs.python35Packages.buildPythonPackage rec { - name = "toolz-${version}"; - version = "0.7.4"; - - src = pkgs.fetchurl{ - url = "https://pypi.python.org/packages/source/t/toolz/toolz-${version}.tar.gz"; - sha256 = "43c2c9e5e7a16b6c88ba3088a9bfc82f7db8e13378be7c78d6c14a5f8ed05afd"; - }; - - meta = { - homepage = "http://github.com/pytoolz/toolz/"; - description = "List processing tools and functional utilities"; - license = licenses.bsd3; - maintainers = with maintainers; [ fridh ]; - }; - }; - - in pkgs.python35.buildEnv.override rec { - - extraLibs = [ pkgs.python35Packages.numpy toolz ]; -} -).env -``` - -and again execute `nix-shell`, then we get a Python 3.5 environment with our -locally defined package as well as `numpy` which is build according to the -definition in Nixpkgs. What did we do here? Well, we took the Nix expression -that we used earlier to build a Python environment, and said that we wanted to -include our own version of `toolz`. To introduce our own package in the scope of -`buildEnv.override` we used a -[`let`](http://nixos.org/nix/manual/#sec-constructs) expression. - -### Handling dependencies - -Our example, `toolz`, doesn't have any dependencies on other Python -packages or system libraries. According to the manual, `buildPythonPackage` -uses the arguments `buildInputs` and `propagatedBuildInputs` to specify dependencies. If something is -exclusively a build-time dependency, then the dependency should be included as a -`buildInput`, but if it is (also) a runtime dependency, then it should be added -to `propagatedBuildInputs`. Test dependencies are considered build-time dependencies. - -The following example shows which arguments are given to `buildPythonPackage` in -order to build [`datashape`](https://github.com/blaze/datashape). - -```nix -datashape = buildPythonPackage rec { - name = "datashape-${version}"; - version = "0.4.7"; - - src = pkgs.fetchurl { - url = "https://pypi.python.org/packages/source/D/DataShape/${name}.tar.gz"; - sha256 = "14b2ef766d4c9652ab813182e866f493475e65e558bed0822e38bf07bba1a278"; - }; - - buildInputs = with self; [ pytest ]; - propagatedBuildInputs = with self; [ numpy multipledispatch dateutil ]; - - meta = { - homepage = https://github.com/ContinuumIO/datashape; - description = "A data description language"; - license = licenses.bsd2; - maintainers = with maintainers; [ fridh ]; - }; -}; -``` - -We can see several runtime dependencies, `numpy`, `multipledispatch`, and -`dateutil`. Furthermore, we have one `buildInput`, i.e. `pytest`. `pytest` is a -test runner and is only used during the `checkPhase` and is therefore not added -to `propagatedBuildInputs`. - -In the previous case we had only dependencies on other Python packages to consider. -Occasionally you have also system libraries to consider. E.g., `lxml` provides -Python bindings to `libxml2` and `libxslt`. These libraries are only required -when building the bindings and are therefore added as `buildInputs`. - -```nix -lxml = buildPythonPackage rec { - name = "lxml-3.4.4"; - - src = pkgs.fetchurl { - url = "http://pypi.python.org/packages/source/l/lxml/${name}.tar.gz"; - sha256 = "16a0fa97hym9ysdk3rmqz32xdjqmy4w34ld3rm3jf5viqjx65lxk"; - }; - - buildInputs = with self; [ pkgs.libxml2 pkgs.libxslt ]; - - meta = { - description = "Pythonic binding for the libxml2 and libxslt libraries"; - homepage = http://lxml.de; - license = licenses.bsd3; - maintainers = with maintainers; [ sjourdois ]; - }; -}; -``` - -In this example `lxml` and Nix are able to work out exactly where the relevant -files of the dependencies are. This is not always the case. - -The example below shows bindings to The Fastest Fourier Transform in the West, commonly known as -FFTW. On Nix we have separate packages of FFTW for the different types of floats -(`"single"`, `"double"`, `"long-double"`). The bindings need all three types, -and therefore we add all three as `buildInputs`. The bindings don't expect to -find each of them in a different folder, and therefore we have to set `LDFLAGS` -and `CFLAGS`. - -```nix -pyfftw = buildPythonPackage rec { - name = "pyfftw-${version}"; - version = "0.9.2"; - - src = pkgs.fetchurl { - url = "https://pypi.python.org/packages/source/p/pyFFTW/pyFFTW-${version}.tar.gz"; - sha256 = "f6bbb6afa93085409ab24885a1a3cdb8909f095a142f4d49e346f2bd1b789074"; - }; - - buildInputs = [ pkgs.fftw pkgs.fftwFloat pkgs.fftwLongDouble]; - - propagatedBuildInputs = with self; [ numpy scipy ]; - - # Tests cannot import pyfftw. pyfftw works fine though. - doCheck = false; - - LDFLAGS="-L${pkgs.fftw}/lib -L${pkgs.fftwFloat}/lib -L${pkgs.fftwLongDouble}/lib" - CFLAGS="-I${pkgs.fftw}/include -I${pkgs.fftwFloat}/include -I${pkgs.fftwLongDouble}/include" - ''; - - meta = { - description = "A pythonic wrapper around FFTW, the FFT library, presenting a unified interface for all the supported transforms"; - homepage = http://hgomersall.github.com/pyFFTW/; - license = with licenses; [ bsd2 bsd3 ]; - maintainer = with maintainers; [ fridh ]; - }; -}; -``` -Note also the line `doCheck = false;`, we explicitly disabled running the test-suite. - - -#### Develop local package - -As a Python developer you're likely aware of [development mode](http://pythonhosted.org/setuptools/setuptools.html#development-mode) (`python setup.py develop`); -instead of installing the package this command creates a special link to the project code. -That way, you can run updated code without having to reinstall after each and every change you make. -Development mode is also available on Nix as [explained](http://nixos.org/nixpkgs/manual/#ssec-python-development) in the Nixpkgs manual. -Let's see how you can use it. - -In the previous Nix expression the source was fetched from an url. We can also refer to a local source instead using - -```nix -src = ./path/to/source/tree; -``` - -If we create a `shell.nix` file which calls `buildPythonPackage`, and if `src` -is a local source, and if the local source has a `setup.py`, then development -mode is activated. - -In the following example we create a simple environment that -has a Python 3.5 version of our package in it, as well as its dependencies and -other packages we like to have in the environment, all specified with `propagatedBuildInputs`. -Indeed, we can just add any package we like to have in our environment to `propagatedBuildInputs`. - -```nix -with import ; -with pkgs.python35Packages; - -buildPythonPackage rec { - name = "mypackage"; - src = ./path/to/package/source; - propagatedBuildInputs = [ pytest numpy pkgs.libsndfile ]; -}; -``` - -It is important to note that due to how development mode is implemented on Nix it is not possible to have multiple packages simultaneously in development mode. - - -### Organising your packages - -So far we discussed how you can use Python on Nix, and how you can develop with -it. We've looked at how you write expressions to package Python packages, and we -looked at how you can create environments in which specified packages are -available. - -At some point you'll likely have multiple packages which you would -like to be able to use in different projects. In order to minimise unnecessary -duplication we now look at how you can maintain yourself a repository with your -own packages. The important functions here are `import` and `callPackage`. - -### Including a derivation using `callPackage` - -Earlier we created a Python environment using `buildEnv`, and included the -`toolz` package via a `let` expression. -Let's split the package definition from the environment definition. - -We first create a function that builds `toolz` in `~/path/to/toolz/release.nix` - -```nix -{ pkgs, buildPythonPackage }: - -buildPythonPackage rec { - name = "toolz-${version}"; - version = "0.7.4"; - - src = pkgs.fetchurl{ - url = "https://pypi.python.org/packages/source/t/toolz/toolz-${version}.tar.gz"; - sha256 = "43c2c9e5e7a16b6c88ba3088a9bfc82f7db8e13378be7c78d6c14a5f8ed05afd"; - }; - - meta = { - homepage = "http://github.com/pytoolz/toolz/"; - description = "List processing tools and functional utilities"; - license = licenses.bsd3; - maintainers = with maintainers; [ fridh ]; - }; -}; -``` - -It takes two arguments, `pkgs` and `buildPythonPackage`. -We now call this function using `callPackage` in the definition of our environment - -```nix -with import {}; - -( let - toolz = pkgs.callPackage ~/path/to/toolz/release.nix { pkgs=pkgs; buildPythonPackage=pkgs.python35Packages.buildPythonPackage; }; - in pkgs.python35.buildEnv.override rec { - extraLibs = [ pkgs.python35Packages.numpy toolz ]; -} -).env -``` - -Important to remember is that the Python version for which the package is made -depends on the `python` derivation that is passed to `buildPythonPackage`. Nix -tries to automatically pass arguments when possible, which is why generally you -don't explicitly define which `python` derivation should be used. In the above -example we use `buildPythonPackage` that is part of the set `python35Packages`, -and in this case the `python35` interpreter is automatically used. - - - -## Reference - -### Interpreters - -Versions 2.6, 2.7, 3.3, 3.4 and 3.5 of the CPython interpreter are available on -Nix and are available as `python26`, `python27`, `python33`, `python34` and -`python35`. The PyPy interpreter is also available as `pypy`. Currently, the -aliases `python` and `python3` correspond to respectively `python27` and -`python35`. The Nix expressions for the interpreters can be found in -`pkgs/development/interpreters/python`. - - -#### Missing modules standard library - -The interpreters `python26` and `python27` do not include modules that -require external dependencies. This is done in order to reduce the closure size. -The following modules need to be added as `buildInput` explicitly: - -* `python.modules.bsddb` -* `python.modules.curses` -* `python.modules.curses_panel` -* `python.modules.crypt` -* `python.modules.gdbm` -* `python.modules.sqlite3` -* `python.modules.tkinter` -* `python.modules.readline` - -For convenience `python27Full` and `python26Full` are provided with all -modules included. - -All packages depending on any Python interpreter get appended -`out/{python.sitePackages}` to `$PYTHONPATH` if such directory -exists. - -#### Attributes on interpreters packages - -Each interpreter has the following attributes: - -- `libPrefix`. Name of the folder in `${python}/lib/` for corresponding interpreter. -- `interpreter`. Alias for `${python}/bin/${executable}`. -- `buildEnv`. Function to build python interpreter environments with extra packages bundled together. See section *python.buildEnv function* for usage and documentation. -- `sitePackages`. Alias for `lib/${libPrefix}/site-packages`. -- `executable`. Name of the interpreter executable, ie `python3.4`. - -### Building packages and applications - -Python packages (libraries) and applications that use `setuptools` or -`distutils` are typically built with respectively the `buildPythonPackage` and -`buildPythonApplication` functions. - -All Python packages reside in `pkgs/top-level/python-packages.nix` and all -applications elsewhere. Some packages are also defined in -`pkgs/development/python-modules`. It is important that these packages are -called in `pkgs/top-level/python-packages.nix` and not elsewhere, to guarantee -the right version of the package is built. - -Based on the packages defined in `pkgs/top-level/python-packages.nix` an -attribute set is created for each available Python interpreter. The available -sets are - -* `pkgs.python26Packages` -* `pkgs.python27Packages` -* `pkgs.python33Packages` -* `pkgs.python34Packages` -* `pkgs.python35Packages` -* `pkgs.pypyPackages` - -and the aliases - -* `pkgs.pythonPackages` pointing to `pkgs.python27Packages` -* `pkgs.python3Packages` pointing to `pkgs.python35Packages` - -#### `buildPythonPackage` function - -The `buildPythonPackage` function is implemented in -`pkgs/development/python-modules/generic/default.nix` - -and can be used as: - - twisted = buildPythonPackage { - name = "twisted-8.1.0"; - - src = pkgs.fetchurl { - url = http://tmrc.mit.edu/mirror/twisted/Twisted/8.1/Twisted-8.1.0.tar.bz2; - sha256 = "0q25zbr4xzknaghha72mq57kh53qw1bf8csgp63pm9sfi72qhirl"; - }; - - propagatedBuildInputs = [ self.ZopeInterface ]; - - meta = { - homepage = http://twistedmatrix.com/; - description = "Twisted, an event-driven networking engine written in Python"; - license = stdenv.lib.licenses.mit; }; - }; - -The `buildPythonPackage` mainly does four things: - -* In the `buildPhase`, it calls `${python.interpreter} setup.py bdist_wheel` to build a wheel binary zipfile. -* In the `installPhase`, it installs the wheel file using `pip install *.whl`. -* In the `postFixup` phase, the `wrapPythonPrograms` bash function is called to wrap all programs in the `$out/bin/*` directory to include `$PYTHONPATH` and `$PATH` environment variables. -* In the `installCheck` phase, `${python.interpreter} setup.py test` is ran. - -As in Perl, dependencies on other Python packages can be specified in the -`buildInputs` and `propagatedBuildInputs` attributes. If something is -exclusively a build-time dependency, use `buildInputs`; if it’s (also) a runtime -dependency, use `propagatedBuildInputs`. - -By default tests are run because `doCheck = true`. Test dependencies, like -e.g. the test runner, should be added to `buildInputs`. - -By default `meta.platforms` is set to the same value -as the interpreter unless overriden otherwise. - -##### `buildPythonPackage` parameters - -All parameters from `mkDerivation` function are still supported. - -* `namePrefix`: Prepended text to `${name}` parameter. Defaults to `"python3.3-"` for Python 3.3, etc. Set it to `""` if you're packaging an application or a command line tool. -* `disabled`: If `true`, package is not build for particular python interpreter version. Grep around `pkgs/top-level/python-packages.nix` for examples. -* `setupPyBuildFlags`: List of flags passed to `setup.py build_ext` command. -* `pythonPath`: List of packages to be added into `$PYTHONPATH`. Packages in `pythonPath` are not propagated (contrary to `propagatedBuildInputs`). -* `preShellHook`: Hook to execute commands before `shellHook`. -* `postShellHook`: Hook to execute commands after `shellHook`. -* `makeWrapperArgs`: A list of strings. Arguments to be passed to `makeWrapper`, which wraps generated binaries. By default, the arguments to `makeWrapper` set `PATH` and `PYTHONPATH` environment variables before calling the binary. Additional arguments here can allow a developer to set environment variables which will be available when the binary is run. For example, `makeWrapperArgs = ["--set FOO BAR" "--set BAZ QUX"]`. -* `installFlags`: A list of strings. Arguments to be passed to `pip install`. To pass options to `python setup.py install`, use `--install-option`. E.g., `installFlags=["--install-option='--cpp_implementation'"]. - -#### `buildPythonApplication` function - -The `buildPythonApplication` function is practically the same as `buildPythonPackage`. -The difference is that `buildPythonPackage` by default prefixes the names of the packages with the version of the interpreter. -Because with an application we're not interested in multiple version the prefix is dropped. - -#### python.buildEnv function - -Python environments can be created using the low-level `pkgs.buildEnv` function. -This example shows how to create an environment that has the Pyramid Web Framework. -Saving the following as `default.nix` - - with import {}; - - python.buildEnv.override { - extraLibs = [ pkgs.pythonPackages.pyramid ]; - ignoreCollisions = true; - } - -and running `nix-build` will create - - /nix/store/cf1xhjwzmdki7fasgr4kz6di72ykicl5-python-2.7.8-env - -with wrapped binaries in `bin/`. - -You can also use the `env` attribute to create local environments with needed -packages installed. This is somewhat comparable to `virtualenv`. For example, -running `nix-shell` with the following `shell.nix` - - with import {}; - - (python3.buildEnv.override { - extraLibs = with python3Packages; [ numpy requests ]; - }).env - -will drop you into a shell where Python will have the -specified packages in its path. - - -##### `python.buildEnv` arguments - -* `extraLibs`: List of packages installed inside the environment. -* `postBuild`: Shell command executed after the build of environment. -* `ignoreCollisions`: Ignore file collisions inside the environment (default is `false`). - -### Development mode - -Development or editable mode is supported. To develop Python packages -`buildPythonPackage` has additional logic inside `shellPhase` to run `pip -install -e . --prefix $TMPDIR/`for the package. - -Warning: `shellPhase` is executed only if `setup.py` exists. - -Given a `default.nix`: - - with import {}; - - buildPythonPackage { name = "myproject"; - - buildInputs = with pkgs.pythonPackages; [ pyramid ]; - - src = ./.; } - -Running `nix-shell` with no arguments should give you -the environment in which the package would be build with -`nix-build`. - -Shortcut to setup environments with C headers/libraries and python packages: - - $ nix-shell -p pythonPackages.pyramid zlib libjpeg git - -Note: There is a boolean value `lib.inNixShell` set to `true` if nix-shell is invoked. - -### Tools - -Packages inside nixpkgs are written by hand. However many tools exist in -community to help save time. No tool is preferred at the moment. - -- [python2nix](https://github.com/proger/python2nix) by Vladimir Kirillov -- [pypi2nix](https://github.com/garbas/pypi2nix) by Rok Garbas -- [pypi2nix](https://github.com/offlinehacker/pypi2nix) by Jaka Hudoklin - -## FAQ - -### How to solve circular dependencies? - -Consider the packages `A` and `B` that depend on each other. When packaging `B`, -a solution is to override package `A` not to depend on `B` as an input. The same -should also be done when packaging `A`. - -### `install_data` / `data_files` problems - -If you get the following error: - - could not create '/nix/store/6l1bvljpy8gazlsw2aw9skwwp4pmvyxw-python-2.7.8/etc': - Permission denied - -This is a [known bug](https://bitbucket.org/pypa/setuptools/issue/130/install_data-doesnt-respect-prefix) in setuptools. -Setuptools `install_data` does not respect `--prefix`. An example of such package using the feature is `pkgs/tools/X11/xpra/default.nix`. -As workaround install it as an extra `preInstall` step: - - ${python.interpreter} setup.py install_data --install-dir=$out --root=$out - sed -i '/ = data\_files/d' setup.py - - -### Rationale of non-existent global site-packages - -On most operating systems a global `site-packages` is maintained. This however -becomes problematic if you want to run multiple Python versions or have multiple -versions of certain libraries for your projects. Generally, you would solve such -issues by creating virtual environments using `virtualenv`. - -On Nix each package has an isolated dependency tree which, in the case of -Python, guarantees the right versions of the interpreter and libraries or -packages are available. There is therefore no need to maintain a global `site-packages`. - -If you want to create a Python environment for development, then the recommended -method is to use `nix-shell`, either with or without the `python.buildEnv` -function. - - -## Contributing - -### Contributing guidelines - -Following rules are desired to be respected: - -* Make sure package builds for all python interpreters. Use `disabled` argument to `buildPythonPackage` to set unsupported interpreters. -* If tests need to be disabled for a package, make sure you leave a comment about reasoning. -* Packages in `pkgs/top-level/python-packages.nix` are sorted quasi-alphabetically to avoid merge conflicts. -* Python libraries are supposed to be in `python-packages.nix` and packaged with `buildPythonPackage`. Python applications live outside of `python-packages.nix` and are packaged with `buildPythonApplication`. diff --git a/doc/languages-frameworks/python.xml b/doc/languages-frameworks/python.xml new file mode 100644 index 000000000000..57aceeb48685 --- /dev/null +++ b/doc/languages-frameworks/python.xml @@ -0,0 +1,447 @@ +
+ +Python + + + Currently supported interpreters are python26, python27, + python33, python34, python35 + and pypy. + + + + python is an alias to python27 and python3 is an alias to python34. + + + + python26 and python27 do not include modules that require + external dependencies (to reduce dependency bloat). Following modules need to be added as + buildInput explicitly: + + + + python.modules.bsddb + python.modules.curses + python.modules.curses_panel + python.modules.crypt + python.modules.gdbm + python.modules.sqlite3 + python.modules.tkinter + python.modules.readline + + +For convenience python27Full and python26Full +are provided with all modules included. + + + Python packages that + use setuptools or distutils, + can be built using the buildPythonPackage function as documented below. + + + + All packages depending on any Python interpreter get appended $out/${python.sitePackages} + to $PYTHONPATH if such directory exists. + + + + + Useful attributes on interpreters packages: + + + + libPrefix + + Name of the folder in ${python}/lib/ for corresponding interpreter. + + + + + interpreter + + Alias for ${python}/bin/${executable}. + + + + + buildEnv + + Function to build python interpreter environments with extra packages bundled together. + See for usage and documentation. + + + + + sitePackages + + Alias for lib/${libPrefix}/site-packages. + + + + + executable + + Name of the interpreter executable, ie python3.4. + + + + +
<varname>buildPythonPackage</varname> function + + + The function is implemented in + pkgs/development/python-modules/generic/default.nix. + Example usage: + + +twisted = buildPythonPackage { + name = "twisted-8.1.0"; + + src = pkgs.fetchurl { + url = http://tmrc.mit.edu/mirror/twisted/Twisted/8.1/Twisted-8.1.0.tar.bz2; + sha256 = "0q25zbr4xzknaghha72mq57kh53qw1bf8csgp63pm9sfi72qhirl"; + }; + + propagatedBuildInputs = [ self.ZopeInterface ]; + + meta = { + homepage = http://twistedmatrix.com/; + description = "Twisted, an event-driven networking engine written in Python"; + license = stdenv.lib.licenses.mit; + }; +}; + + + Most of Python packages that use buildPythonPackage are defined + in pkgs/top-level/python-packages.nix + and generated for each python interpreter separately into attribute sets python26Packages, + python27Packages, python35Packages, python33Packages, + python34Packages and pypyPackages. + + + + buildPythonPackage mainly does four things: + + + + In the buildPhase, it calls + ${python.interpreter} setup.py bdist_wheel to build a wheel binary zipfile. + + + + In the installPhase, it installs the wheel file using + pip install *.whl. + + + + In the postFixup phase, wrapPythonPrograms + bash function is called to wrap all programs in $out/bin/* + directory to include $PYTHONPATH and $PATH + environment variables. + + + + In the installCheck phase, ${python.interpreter} setup.py test + is ran. + + + + + By default doCheck = true is set + + + As in Perl, dependencies on other Python packages can be specified in the + buildInputs and + propagatedBuildInputs attributes. If something is + exclusively a build-time dependency, use + buildInputs; if it’s (also) a runtime dependency, + use propagatedBuildInputs. + + + + By default meta.platforms is set to the same value + as the interpreter unless overriden otherwise. + + + + + <varname>buildPythonPackage</varname> parameters + (all parameters from <varname>mkDerivation</varname> function are still supported) + + + + namePrefix + + Prepended text to ${name} parameter. + Defaults to "python3.3-" for Python 3.3, etc. Set it to + "" + if you're packaging an application or a command line tool. + + + + + disabled + + If true, package is not build for + particular python interpreter version. Grep around + pkgs/top-level/python-packages.nix + for examples. + + + + + setupPyBuildFlags + + List of flags passed to setup.py build_ext command. + + + + + pythonPath + + List of packages to be added into $PYTHONPATH. + Packages in pythonPath are not propagated + (contrary to propagatedBuildInputs). + + + + + preShellHook + + Hook to execute commands before shellHook. + + + + + postShellHook + + Hook to execute commands after shellHook. + + + + + makeWrapperArgs + + A list of strings. Arguments to be passed to + makeWrapper, which wraps generated binaries. By + default, the arguments to makeWrapper set + PATH and PYTHONPATH environment + variables before calling the binary. Additional arguments here can + allow a developer to set environment variables which will be + available when the binary is run. For example, + makeWrapperArgs = ["--set FOO BAR" "--set BAZ QUX"]. + + + + + +
+ +
<function>python.buildEnv</function> function + + Create Python environments using low-level pkgs.buildEnv function. Example default.nix: + + + {}; + +python.buildEnv.override { + extraLibs = [ pkgs.pythonPackages.pyramid ]; + ignoreCollisions = true; +}]]> + + + Running nix-build will create + /nix/store/cf1xhjwzmdki7fasgr4kz6di72ykicl5-python-2.7.8-env + with wrapped binaries in bin/. + + + + You can also use env attribute to create local + environments with needed packages installed (somewhat comparable to + virtualenv). For example, with the following + shell.nix: + + + {}; + +(python3.buildEnv.override { + extraLibs = with python3Packages; + [ numpy + requests + ]; +}).env]]> + + + Running nix-shell will drop you into a shell where + python will have specified packages in its path. + + + + + <function>python.buildEnv</function> arguments + + + + extraLibs + + List of packages installed inside the environment. + + + + + postBuild + + Shell command executed after the build of environment. + + + + + ignoreCollisions + + Ignore file collisions inside the environment (default is false). + + + +
+ +
Tools + +Packages inside nixpkgs are written by hand. However many tools +exist in community to help save time. No tool is preferred at the moment. + + + + + + python2nix + by Vladimir Kirillov + + + + pypi2nix + by Rok Garbas + + + + pypi2nix + by Jaka Hudoklin + + + + +
+ +
Development + + + To develop Python packages buildPythonPackage has + additional logic inside shellPhase to run + pip install -e . --prefix $TMPDIR/ for the package. + + + shellPhase is executed only if setup.py + exists. + + + Given a default.nix: + + + {}; + +buildPythonPackage { + name = "myproject"; + + buildInputs = with pkgs.pythonPackages; [ pyramid ]; + + src = ./.; +}]]> + + + Running nix-shell with no arguments should give you + the environment in which the package would be build with + nix-build. + + + + Shortcut to setup environments with C headers/libraries and python packages: + + $ nix-shell -p pythonPackages.pyramid zlib libjpeg git + + + + There is a boolean value lib.inNixShell set to + true if nix-shell is invoked. + + +
+ +
FAQ + + + + + How to solve circular dependencies? + + If you have packages A and B that + depend on each other, when packaging B override package + A not to depend on B as input + (and also the other way around). + + + + + install_data / data_files problems resulting into error: could not create '/nix/store/6l1bvljpy8gazlsw2aw9skwwp4pmvyxw-python-2.7.8/etc': Permission denied + + + Known bug in setuptools install_data does not respect --prefix. Example of + such package using the feature is pkgs/tools/X11/xpra/default.nix. As workaround + install it as an extra preInstall step: + + ${python.interpreter} setup.py install_data --install-dir=$out --root=$out +sed -i '/ = data_files/d' setup.py + + + + + Rationale of non-existent global site-packages + + There is no need to have global site-packages in Nix. Each package has isolated + dependency tree and installing any python package will only populate $PATH + inside user environment. See to create self-contained + interpreter with a set of packages. + + + + + +
+ + +
Contributing guidelines + + Following rules are desired to be respected: + + + + + + Make sure package builds for all python interpreters. Use disabled argument to + buildPythonPackage to set unsupported interpreters. + + + + If tests need to be disabled for a package, make sure you leave a comment about reasoning. + + + + Packages in pkgs/top-level/python-packages.nix + are sorted quasi-alphabetically to avoid merge conflicts. + + + + +
+ +
+ -- cgit v1.2.3