Convert trivial-builders from DocBook to CommonMark

3 files changed, 53 insertions, 91 deletions

diff --git a/doc/builders/trivial-builders.chapter.md b/doc/builders/trivial-builders.chapter.md
new file mode 100644
index 000000000000..c39803fbe339
--- /dev/null
+++ b/doc/builders/trivial-builders.chapter.md
@@ -0,0 +1,52 @@
+# Trivial builders {#chap-trivial-builders}
+
+Nixpkgs provides a couple of functions that help with building derivations. The most important one, `stdenv.mkDerivation`, has already been documented above. The following functions wrap `stdenv.mkDerivation`, making it easier to use in certain cases.
+
+## `runCommand` {#trivial-builder-runCommand}
+
+This takes three arguments, `name`, `env`, and `buildCommand`. `name` is just the name that Nix will append to the store path in the same way that `stdenv.mkDerivation` uses its `name` attribute. `env` is an attribute set specifying environment variables that will be set for this derivation. These attributes are then passed to the wrapped `stdenv.mkDerivation`. `buildCommand` specifies the commands that will be run to create this derivation. Note that you will need to create `$out` for Nix to register the command as successful.
+
+An example of using `runCommand` is provided below.
+
+```nix
+(import <nixpkgs> {}).runCommand "my-example" {} ''
+  echo My example command is running
+
+  mkdir $out
+
+  echo I can write data to the Nix store > $out/message
+
+  echo I can also run basic commands like:
+
+  echo ls
+  ls
+
+  echo whoami
+  whoami
+
+  echo date
+  date
+''
+```
+
+## `runCommandCC` {#trivial-builder-runCommandCC}
+
+This works just like `runCommand`. The only difference is that it also provides a C compiler in `buildCommand`'s environment. To minimize your dependencies, you should only use this if you are sure you will need a C compiler as part of running your command.
+
+## `runCommandLocal` {#trivial-builder-runCommandLocal}
+
+Variant of `runCommand` that forces the derivation to be built locally, it is not substituted. This is intended for very cheap commands (<1s execution time). It saves on the network roundrip and can speed up a build.
+
+::: {.note}
+This sets [`allowSubstitutes` to `false`](https://nixos.org/nix/manual/#adv-attr-allowSubstitutes), so only use `runCommandLocal` if you are certain the user will always have a builder for the `system` of the derivation. This should be true for most trivial use cases (e.g. just copying some files to a different location or adding symlinks), because there the `system` is usually the same as `builtins.currentSystem`.
+:::
+
+## `writeTextFile`, `writeText`, `writeTextDir`, `writeScript`, `writeScriptBin` {#trivial-builder-writeText}
+
+These functions write `text` to the Nix store. This is useful for creating scripts from Nix expressions. `writeTextFile` takes an attribute set and expects two arguments, `name` and `text`. `name` corresponds to the name used in the Nix store path. `text` will be the contents of the file. You can also set `executable` to true to make this file have the executable bit set.
+
+Many more commands wrap `writeTextFile` including `writeText`, `writeTextDir`, `writeScript`, and `writeScriptBin`. These are convenience functions over `writeTextFile`.
+
+## `symlinkJoin` {#trivial-builder-symlinkJoin}
+
+This can be used to put many derivations into the same directory structure. It works by creating a new derivation and adding symlinks to each of the paths listed. It expects two arguments, `name`, and `paths`. `name` is the name used in the Nix store path for the created derivation. `paths` is a list of paths that will be symlinked. These paths can be to Nix store derivations or any other subdirectory contained within.
diff --git a/doc/builders/trivial-builders.xml b/doc/builders/trivial-builders.xml
deleted file mode 100644
index 94948c57b91f..000000000000
--- a/doc/builders/trivial-builders.xml
+++ /dev/null
@@ -1,90 +0,0 @@
-<chapter xmlns="http://docbook.org/ns/docbook"
-         xmlns:xlink="http://www.w3.org/1999/xlink"
-         xmlns:xi="http://www.w3.org/2001/XInclude"
-         xml:id="chap-trivial-builders">
- <title>Trivial builders</title>
- <para>
-  Nixpkgs provides a couple of functions that help with building derivations. The most important one, <function>stdenv.mkDerivation</function>, has already been documented above. The following functions wrap <function>stdenv.mkDerivation</function>, making it easier to use in certain cases.
- </para>
- <variablelist>
-  <varlistentry xml:id="trivial-builder-runCommand">
-   <term>
-    <literal>runCommand</literal>
-   </term>
-   <listitem>
-    <para>
-     This takes three arguments, <literal>name</literal>, <literal>env</literal>, and <literal>buildCommand</literal>. <literal>name</literal> is just the name that Nix will append to the store path in the same way that <literal>stdenv.mkDerivation</literal> uses its <literal>name</literal> attribute. <literal>env</literal> is an attribute set specifying environment variables that will be set for this derivation. These attributes are then passed to the wrapped <literal>stdenv.mkDerivation</literal>. <literal>buildCommand</literal> specifies the commands that will be run to create this derivation. Note that you will need to create <literal>$out</literal> for Nix to register the command as successful.
-    </para>
-    <para>
-     An example of using <literal>runCommand</literal> is provided below.
-    </para>
-<programlisting>
-(import &lt;nixpkgs&gt; {}).runCommand "my-example" {} ''
-  echo My example command is running
-
-  mkdir $out
-
-  echo I can write data to the Nix store > $out/message
-
-  echo I can also run basic commands like:
-
-  echo ls
-  ls
-
-  echo whoami
-  whoami
-
-  echo date
-  date
-''
-</programlisting>
-   </listitem>
-  </varlistentry>
-  <varlistentry xml:id="trivial-builder-runCommandCC">
-   <term>
-    <literal>runCommandCC</literal>
-   </term>
-   <listitem>
-    <para>
-     This works just like <literal>runCommand</literal>. The only difference is that it also provides a C compiler in <literal>buildCommand</literal>’s environment. To minimize your dependencies, you should only use this if you are sure you will need a C compiler as part of running your command.
-    </para>
-   </listitem>
-  </varlistentry>
-  <varlistentry xml:id="trivial-builder-runCommandLocal">
-   <term>
-    <literal>runCommandLocal</literal>
-   </term>
-   <listitem>
-    <para>
-     Variant of <literal>runCommand</literal> that forces the derivation to be built locally, it is not substituted. This is intended for very cheap commands (&lt;1s execution time). It saves on the network roundrip and can speed up a build.
-    </para>
-    <note><para>
-      This sets <link xlink:href="https://nixos.org/nix/manual/#adv-attr-allowSubstitutes"><literal>allowSubstitutes</literal> to <literal>false</literal></link>, so only use <literal>runCommandLocal</literal> if you are certain the user will always have a builder for the <literal>system</literal> of the derivation. This should be true for most trivial use cases (e.g. just copying some files to a different location or adding symlinks), because there the <literal>system</literal> is usually the same as <literal>builtins.currentSystem</literal>.
-    </para></note>
-   </listitem>
-  </varlistentry>
-  <varlistentry xml:id="trivial-builder-writeText">
-   <term>
-    <literal>writeTextFile</literal>, <literal>writeText</literal>, <literal>writeTextDir</literal>, <literal>writeScript</literal>, <literal>writeScriptBin</literal>
-   </term>
-   <listitem>
-    <para>
-     These functions write <literal>text</literal> to the Nix store. This is useful for creating scripts from Nix expressions. <literal>writeTextFile</literal> takes an attribute set and expects two arguments, <literal>name</literal> and <literal>text</literal>. <literal>name</literal> corresponds to the name used in the Nix store path. <literal>text</literal> will be the contents of the file. You can also set <literal>executable</literal> to true to make this file have the executable bit set.
-    </para>
-    <para>
-     Many more commands wrap <literal>writeTextFile</literal> including <literal>writeText</literal>, <literal>writeTextDir</literal>, <literal>writeScript</literal>, and <literal>writeScriptBin</literal>. These are convenience functions over <literal>writeTextFile</literal>.
-    </para>
-   </listitem>
-  </varlistentry>
-  <varlistentry xml:id="trivial-builder-symlinkJoin">
-   <term>
-    <literal>symlinkJoin</literal>
-   </term>
-   <listitem>
-    <para>
-     This can be used to put many derivations into the same directory structure. It works by creating a new derivation and adding symlinks to each of the paths listed. It expects two arguments, <literal>name</literal>, and <literal>paths</literal>. <literal>name</literal> is the name used in the Nix store path for the created derivation. <literal>paths</literal> is a list of paths that will be symlinked. These paths can be to Nix store derivations or any other subdirectory contained within.
-    </para>
-   </listitem>
-  </varlistentry>
- </variablelist>
-</chapter>
diff --git a/doc/manual.xml b/doc/manual.xml
index 4367c023b402..eb14dbb440d1 100644
--- a/doc/manual.xml
+++ b/doc/manual.xml
@@ -24,7 +24,7 @@
  <part>
   <title>Builders</title>
   <xi:include href="builders/fetchers.xml" />
-  <xi:include href="builders/trivial-builders.xml" />
+  <xi:include href="builders/trivial-builders.chapter.xml" />
   <xi:include href="builders/special.xml" />
   <xi:include href="builders/images.xml" />
   <xi:include href="languages-frameworks/index.xml" />