| Age | Commit message (Collapse) | Author |
|---|
|
Add a script to install nix on non-systemd systems.
|
|
|
|
|
|
|
|
also see https://nixos.org/download.html
|
|
On macOS the system tar has builtin support for lzma while xz isn't
available as a separate binary. There's no builtin package manager
there available either so having to install lzma (without nix) would be
rather painful.
|
|
Use /etc/zshenv instead of /etc/zshrc for profile
|
|
|
|
- --no-channel-add didn't have effect on multi-user installation
- some new flags didn't work at all
- document all installer flags
|
|
install-multi-user: allow overriding user count
|
|
|
|
|
|
|
|
As noted in https://github.com/NixOS/nix/issues/3456 the `/etc/zshenv` file provides a better place for sourcing the nix environment.
|
|
|
|
This should handle installation scenarios we can handle with
anything resembling confidence. Goal is approximating the existing
setup--not enforcing a best-practice...
Approaches (+ installer-handled, - manual) and configs each covers:
+ no change needed; /nix OK on boot volume:
All pre-Catalina (regardless of T2 or FileVault use)
+ create new unencrypted volume:
Catalina, pre-T2, no FileVault
+ create new encrypted-at-rest volume:
Catalina, pre-T2, FileVault
Catalina, T2, no FileVault
- require user to pre-create encrypted volume
Catalina, T2, FileVault
|
|
|
|
|
|
|
|
|
|
|
|
The default login shell for users on macOS 10.15 changed from bash to
zsh. So while generally nonstandard we need to configure it to make nix
function out of the box on macOS.
|
|
Starting macOS 10.15 /nix can't be creasted directly anymore due to the
readonly filesystem, but synthetic.conf was introduced to enable
creating mountpoints or symlinks for special usecases like package
managers.
|
|
|
|
|
|
The install-multi-user script uses blue, green, and red colors, as
well as bold and underline, to add helpful formatting that helps
structure its rather voluminous output.
Unfortunately, the terminal escape sequences it uses are not quite
well-formed. The relevant information is all there, just obscured
by some extra noise, a leading parameter `38`. Empirically, the
result is:
* On macOS, in both Terminal.app and iTerm2, the spurious `38` is
ignored, the rest of the escape sequence is applied, and the colors
show up as intended.
* On Linux, in at least gnome-terminal and xterm, the spurious `38`
and the next parameter after it are ignored, and what's left is
applied. So in the sequence `38;4;32`, the 4 (underline) is
ignored but the 32 (green) takes effect; in a more typical sequence
like `38;34`, the 34 (blue) is ignored and nothing happens.
These codes are all unchanged since this script's origins as a
Darwin-only script -- so the fact that they work fine in common macOS
terminals goes some way to explain how the bug arose.
Happily, we can make the colors work as intended by just deleting the
extra `38;`. Tested in all four terminals mentioned above; the new
codes work correctly on all of them, and on the two macOS terminals
they work exactly the same as before.
---
In a bit more technical detail -- perhaps more than anyone, me
included, ever wanted to know, but now that I've gone and learned it
I'll write it down anyway :) -- here's what's happening in these codes:
An ECMA-48 "control sequence" begins with `\033[` aka "CSI", contains
any number of parameters as semicolon-separated decimal numbers (plus
sometimes other wrinkles), and ends with a byte from 0x40..0x7e. In
our case, with `m` aka "SGR", "Select Graphic Rendition".
An SGR control sequence `\033[...m` sets colors, fonts, text styles,
etc. In particular a parameter `31` means red, `32` green, `34` blue,
`4` underline, and `0` means reset to normal. Those are all we use.
There is also a `38`. This is used for setting colors too... but it
needs arguments. `38;5;nn` is color nn from a 256-color palette, and
`38;2;rr;gg;bb` has the given RGB values.
There is no meaning defined for `38;1` or `38;34` etc. On seeing a
parameter `38` followed by an unrecognized argument for it, apparently
some implementations (as seen on macOS) discard only the `38` and
others (as seen on Linux) discard the argument too before resuming.
|
|
After installing Nix, I found that all the files and directories
initially copied into the store were writable, with mode 644 or 755:
drwxr-xr-x 9 root root 4096 Dec 31 1969 /nix/store/ddmmzn4ggz1f66lwxjy64n89864yj9w9-nix-2.3.3
The reason is that that's how they were in the unpacked tarball, and
the install-multi-user script used `rsync -p` without doing anything
else to affect the permissions.
The plain `install` script for a single-user install takes care to
do a `chmod -R a-w` on each store path copied. We could do the same
here with one more command; or we can pass `--chmod` to rsync, to
have it write the files with the desired modes in the first place.
Tested the new `rsync` command on both a Linux machine with a
reasonably-modern rsync (3.1.3) and a Mac with its default, ancient,
rsync 2.6.9, and it works as expected on both. Thankfully the latter
is just new enough to have `--chmod`, which dates to rsync 2.6.7.
|
|
|
|
|
|
|
|
system
On a systemd-based Linux distribution: If the user has previously had multi-user Nix installed on the system, removed it and then reinstalled multi-user Nix again the old nix-daemon.service will still be running when `scripts/install-systemd-multi-user.sh` tries to start it which results in nothing being done and the old daemon continuing its run.
When a normal user then tries to use Nix through the daemon the nix binary will fail to connect to the nix-daemon as it does not belong to the currently installed Nix system. See below for steps to reproduce the issue that motivated this change.
$ sh <(curl https://nixos.org/nix/install) --daemon
$ sudo rm -rf /etc/nix /nix /root/.nix-profile /root/.nix-defexpr /root/.nix-channels /home/nix-installer/.nix-profile /home/nix-installer/.nix-defexpr /home/nix-installer/.nix-channels ~/.nix-channels ~/.nix-defexpr/ ~/.nix-profile /etc/profile.d/nix.sh.backup-before-nix /etc/profile.d/nix.sh; sed -i '/added by Nix installer$/d' ~/.bash_profile
$ unset NIX_REMOTE
$ sh <(curl https://nixos.org/nix/install) --daemon
└$ export NIX_REMOTE=daemon
└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
error: cannot connect to daemon at '/nix/var/nix/daemon-socket/socket': No such file or directory
(use '--show-trace' to show detailed location information)
└$ sudo systemctl restart nix-daemon.service
└$ nix-env -iA nixpkgs.hello
installing 'hello-2.10'
these paths will be fetched (6.09 MiB download, 27.04 MiB unpacked):
/nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10
/nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27
copying path '/nix/store/aag9d1y4wcddzzrpfmfp9lcmc7skd7jk-glibc-2.27' from 'https://cache.nixos.org'...
copying path '/nix/store/2g75chlbpxlrqn15zlby2dfh8hr9qwbk-hello-2.10' from 'https://cache.nixos.org'...
building '/nix/store/w9adagg6vlikr799nkkqc9la5hbbpgmi-user-environment.drv'...
created 2 symlinks in user environment
|
|
Some tar implementations can't auto-detect compression formats, so
they must be specified explicitly.
|
|
This is commonly the default behavior with -R, but POSIX leaves the
default unspecified.
|
|
|
|
This is not used anywhere.
|
|
https://hydra.nixos.org/build/104119659
|
|
|
|
|
|
|
|
|
|
|
|
This is already done by the installer, so no need to do it again.
|
|
|
|
'nix-daemon' now creates subdirectories for users when they first
connect.
Fixes #509 (CVE-2019-17365).
Should also fix #3127.
|
|
In the multi-user install script, we originally made sure no previous
references to Nix existed. This prevented any previous installs from
contaminating the new install. However, some users need the ability to
repair their existing Nix installation without uninstalling all
references to Nix. This change allows users with existing Nix
installations to use the installer, while still outputing a warning
message on the dangers of this. As a result, the multi-user install
script work much more like the single-user install script has worked
in the past.
This is a requirement for macOS Catalina users now that
/Library/LaunchDaemons/org.nixos.nix-daemon.plisg is not managed by
the Nix store. If there is ever a change to the .plist, all users will
need to rerun this install script to get the new changes. Otherwise,
changes to the launch daemon will require manual interventions.
|
|
On Catalina, the /nix filesystem might not be mounted at start time.
To avoid this service not starting, we need to keep the launch agent
outside of the Nix store. A wait4pid will hold for our /nix dir to be
mounted.
Fixes #3125.
|
|
install-multi-user: Detect and fail lack of systemd separately
|
|
Allow empty /nix directory in multi-user installer
|
|
Fixes https://github.com/NixOS/nix/issues/240.
Apparently 'tar -xf' can decompress xz files on macOS nowadays.
|
|
If a network proxy configuration is detected, setup an override
systemd unit file for nix-daemon service with the non-empty
proxy variables.
Proxy detection is performed by looking for http/https/ftp proxy and no
proxy variables in user environment
|
