diff options
Diffstat (limited to 'collectors/charts.d.plugin/ap/integrations/access_points.md')
-rw-r--r-- | collectors/charts.d.plugin/ap/integrations/access_points.md | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/ap/integrations/access_points.md b/collectors/charts.d.plugin/ap/integrations/access_points.md new file mode 100644 index 0000000000..a718e70fc3 --- /dev/null +++ b/collectors/charts.d.plugin/ap/integrations/access_points.md @@ -0,0 +1,169 @@ +<!--startmeta +custom_edit_url: "https://github.com/netdata/netdata/edit/master/collectors/charts.d.plugin/ap/README.md" +meta_yaml: "https://github.com/netdata/netdata/edit/master/collectors/charts.d.plugin/ap/metadata.yaml" +sidebar_label: "Access Points" +learn_status: "Published" +learn_rel_path: "Data Collection/Linux Systems/Network" +message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE COLLECTOR'S metadata.yaml FILE" +endmeta--> + +# Access Points + +Plugin: charts.d.plugin +Module: ap + +<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" /> + +## Overview + +The ap collector visualizes data related to wireless access points. + +It uses the `iw` command line utility to detect access points. For each interface that is of `type AP`, it then runs `iw INTERFACE station dump` and collects statistics. + +This collector is only supported on the following platforms: + +- Linux + +This collector only supports collecting metrics from a single instance of this integration. + + +### Default Behavior + +#### Auto-Detection + +The plugin is able to auto-detect if you are running access points on your linux box. + +#### Limits + +The default configuration for this integration does not impose any limits on data collection. + +#### Performance Impact + +The default configuration for this integration is not expected to impose a significant performance impact on the system. + + +## Metrics + +Metrics grouped by *scope*. + +The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels. + + + +### Per wireless device + +These metrics refer to the entire monitored application. + +This scope has no labels. + +Metrics: + +| Metric | Dimensions | Unit | +|:------|:----------|:----| +| ap.clients | clients | clients | +| ap.net | received, sent | kilobits/s | +| ap.packets | received, sent | packets/s | +| ap.issues | retries, failures | issues/s | +| ap.signal | average signal | dBm | +| ap.bitrate | receive, transmit, expected | Mbps | + + + +## Alerts + +There are no alerts configured by default for this integration. + + +## Setup + +### Prerequisites + +#### Install charts.d plugin + +If [using our official native DEB/RPM packages](https://github.com/netdata/netdata/blob/master/packaging/installer/UPDATE.md#determine-which-installation-method-you-used), make sure `netdata-plugin-chartsd` is installed. + + +#### `iw` utility. + +Make sure the `iw` utility is installed. + + +### Configuration + +#### File + +The configuration file name for this integration is `charts.d/ap.conf`. + + +You can edit the configuration file using the `edit-config` script from the +Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory). + +```bash +cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata +sudo ./edit-config charts.d/ap.conf +``` +#### Options + +The config file is sourced by the charts.d plugin. It's a standard bash file. + +The following collapsed table contains all the options that can be configured for the ap collector. + + +<details><summary>Config options</summary> + +| Name | Description | Default | Required | +|:----|:-----------|:-------|:--------:| +| ap_update_every | The data collection frequency. If unset, will inherit the netdata update frequency. | | False | +| ap_priority | Controls the order of charts at the netdata dashboard. | | False | +| ap_retries | The number of retries to do in case of failure before disabling the collector. | | False | + +</details> + +#### Examples + +##### Change the collection frequency + +Specify a custom collection frequence (update_every) for this collector + +```yaml +# the data collection frequency +# if unset, will inherit the netdata update frequency +ap_update_every=10 + +# the charts priority on the dashboard +#ap_priority=6900 + +# the number of retries to do in case of failure +# before disabling the module +#ap_retries=10 + +``` + + +## Troubleshooting + +### Debug Mode + +To troubleshoot issues with the `ap` collector, run the `charts.d.plugin` with the debug option enabled. The output +should give you clues as to why the collector isn't working. + +- Navigate to the `plugins.d` directory, usually at `/usr/libexec/netdata/plugins.d/`. If that's not the case on + your system, open `netdata.conf` and look for the `plugins` setting under `[directories]`. + + ```bash + cd /usr/libexec/netdata/plugins.d/ + ``` + +- Switch to the `netdata` user. + + ```bash + sudo -u netdata -s + ``` + +- Run the `charts.d.plugin` to debug the collector: + + ```bash + ./charts.d.plugin debug 1 ap + ``` + + |