diff options
71 files changed, 619 insertions, 70 deletions
diff --git a/collectors/charts.d.plugin/ap/README.md b/collectors/charts.d.plugin/ap/README.md index befe21eecf..60c547237f 100644 --- a/collectors/charts.d.plugin/ap/README.md +++ b/collectors/charts.d.plugin/ap/README.md @@ -76,8 +76,15 @@ Station 40:b8:37:5a:ed:5e (on wlan0) ## Configuration -You can only set `ap_update_every=NUMBER` to `/etc/netdata/charts.d/ap.conf`, to give the data collection frequency. -To edit this file on your system run `/etc/netdata/edit-config charts.d/ap.conf`. +Edit the `charts.d/ap.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/ap.conf +``` + +You can only set `ap_update_every=NUMBER` to change the data collection frequency. ## Auto-detection diff --git a/collectors/charts.d.plugin/apcupsd/README.md b/collectors/charts.d.plugin/apcupsd/README.md index 51bb6eccd0..2aff8b6e11 100644 --- a/collectors/charts.d.plugin/apcupsd/README.md +++ b/collectors/charts.d.plugin/apcupsd/README.md @@ -1,7 +1,13 @@ # apcupsd -_Under construction_ +## Configuration -Collects UPS metrics +Edit the `charts.d/apcupsd.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/apcupsd.conf +``` [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fcharts.d.plugin%2Fapcupsd%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>) diff --git a/collectors/charts.d.plugin/libreswan/README.md b/collectors/charts.d.plugin/libreswan/README.md index d75c1ea96b..372866c603 100644 --- a/collectors/charts.d.plugin/libreswan/README.md +++ b/collectors/charts.d.plugin/libreswan/README.md @@ -13,9 +13,15 @@ The following charts are created, **per tunnel**: - bytes in - bytes out -## configuration +## Configuration -Its config file is `/etc/netdata/charts.d/libreswan.conf`. +Edit the `charts.d/libreswan.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/libreswan.conf +``` The plugin executes 2 commands to collect all the information it needs: diff --git a/collectors/charts.d.plugin/nut/README.md b/collectors/charts.d.plugin/nut/README.md index ea93318f84..04f2694933 100644 --- a/collectors/charts.d.plugin/nut/README.md +++ b/collectors/charts.d.plugin/nut/README.md @@ -42,9 +42,17 @@ The following charts will be created: - current temperature -## configuration +## Configuration -This is the internal default for `/etc/netdata/nut.conf` +Edit the `charts.d/nut.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/nut.conf +``` + +This is the internal default for `charts.d/nut.conf` ```sh # a space separated list of UPS names diff --git a/collectors/charts.d.plugin/opensips/README.md b/collectors/charts.d.plugin/opensips/README.md index d41b41120a..20698f9b82 100644 --- a/collectors/charts.d.plugin/opensips/README.md +++ b/collectors/charts.d.plugin/opensips/README.md @@ -1,7 +1,13 @@ # OpenSIPS -_Under construction_ +## Configuration -Collects OpenSIPS metrics +Edit the `charts.d/opensips.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/opensips.conf +``` [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fcharts.d.plugin%2Fopensips%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>) diff --git a/collectors/charts.d.plugin/sensors/README.md b/collectors/charts.d.plugin/sensors/README.md index a3fa9d20f7..de7f908548 100644 --- a/collectors/charts.d.plugin/sensors/README.md +++ b/collectors/charts.d.plugin/sensors/README.md @@ -24,9 +24,17 @@ The plugin will create Netdata charts for: One chart for every sensor chip found and each of the above will be created. -## configuration +## Configuration -This is the internal default for `/etc/netdata/sensors.conf` +Edit the `charts.d/sensors.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/sensors.conf +``` + +This is the internal default for `charts.d/sensors.conf` ```sh # the directory the kernel keeps sensor data diff --git a/collectors/python.d.plugin/adaptec_raid/README.md b/collectors/python.d.plugin/adaptec_raid/README.md index 127d595b23..91663aead4 100644 --- a/collectors/python.d.plugin/adaptec_raid/README.md +++ b/collectors/python.d.plugin/adaptec_raid/README.md @@ -35,14 +35,22 @@ Add to `sudoers`: netdata ALL=(root) NOPASSWD: /path/to/arcconf ``` -## configuration +## Configuration - **adaptec_raid** is disabled by default. Should be explicitly enabled in `python.d.conf`. +**adaptec_raid** is disabled by default. Should be explicitly enabled in `python.d.conf`. ```yaml adaptec_raid: yes ``` +Edit the `python.d/adaptec_raid.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/adaptec_raid.conf +``` + ### Screenshot: ![image](https://user-images.githubusercontent.com/22274335/47278133-6d306680-d601-11e8-87c2-cc9c0f42d686.png) diff --git a/collectors/python.d.plugin/am2320/README.md b/collectors/python.d.plugin/am2320/README.md index a0c47e80db..516f54d932 100644 --- a/collectors/python.d.plugin/am2320/README.md +++ b/collectors/python.d.plugin/am2320/README.md @@ -13,6 +13,14 @@ It produces the following charts: ## configuration +Edit the `python.d/am2320.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/am2320.conf +``` + Raspbery Pi Instructions: Hardware install: diff --git a/collectors/python.d.plugin/apache/README.md b/collectors/python.d.plugin/apache/README.md index 8f0ec0c1c7..4201bfbe40 100644 --- a/collectors/python.d.plugin/apache/README.md +++ b/collectors/python.d.plugin/apache/README.md @@ -45,6 +45,14 @@ It produces the following charts: ## configuration +Edit the `python.d/apache.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/apache.conf +``` + Needs only `url` to server's `server-status?auto` Here is an example for 2 servers: diff --git a/collectors/python.d.plugin/beanstalk/README.md b/collectors/python.d.plugin/beanstalk/README.md index c93dfa0d42..c294ac0589 100644 --- a/collectors/python.d.plugin/beanstalk/README.md +++ b/collectors/python.d.plugin/beanstalk/README.md @@ -105,6 +105,14 @@ Module provides server and tube-level statistics: ## configuration +Edit the `python.d/beanstalk.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/beanstalk.conf +``` + Sample: ```yaml diff --git a/collectors/python.d.plugin/bind_rndc/README.md b/collectors/python.d.plugin/bind_rndc/README.md index 021a5d660f..7b8badbe94 100644 --- a/collectors/python.d.plugin/bind_rndc/README.md +++ b/collectors/python.d.plugin/bind_rndc/README.md @@ -51,6 +51,14 @@ It produces: ## configuration +Edit the `python.d/bind_rndc.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/bind_rndc.conf +``` + Sample: ```yaml diff --git a/collectors/python.d.plugin/boinc/README.md b/collectors/python.d.plugin/boinc/README.md index 260ae54b6c..1b68ae0cbc 100644 --- a/collectors/python.d.plugin/boinc/README.md +++ b/collectors/python.d.plugin/boinc/README.md @@ -9,6 +9,14 @@ as well as ones tracking each of the possible states for tasks. ## configuration +Edit the `python.d/boinc.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/boinc.conf +``` + BOINC requires use of a password to access it's RPC interface. You can find this password in the `gui_rpc_auth.cfg` file in your BOINC directory. diff --git a/collectors/python.d.plugin/ceph/README.md b/collectors/python.d.plugin/ceph/README.md index f5b36e1493..ae2cd489e0 100644 --- a/collectors/python.d.plugin/ceph/README.md +++ b/collectors/python.d.plugin/ceph/README.md @@ -23,6 +23,14 @@ It produces: ## Configuration +Edit the `python.d/ceph.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/ceph.conf +``` + Sample: ```yaml diff --git a/collectors/python.d.plugin/chrony/README.md b/collectors/python.d.plugin/chrony/README.md index a45adb3338..8830da351c 100644 --- a/collectors/python.d.plugin/chrony/README.md +++ b/collectors/python.d.plugin/chrony/README.md @@ -18,6 +18,14 @@ Verify that user Netdata can execute `chronyc tracking`. If necessary, update `/ ## Configuration +Edit the `python.d/chrony.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different, if different +sudo ./edit-config python.d/chrony.conf +``` + Sample: ```yaml diff --git a/collectors/python.d.plugin/couchdb/README.md b/collectors/python.d.plugin/couchdb/README.md index 288970674f..c241b2aa83 100644 --- a/collectors/python.d.plugin/couchdb/README.md +++ b/collectors/python.d.plugin/couchdb/README.md @@ -13,6 +13,14 @@ This module monitors vital statistics of a local Apache CouchDB 2.x server, incl ## Configuration +Edit the `python.d/couchdb.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config python.d/couchdb.conf +``` + Sample for a local server running on port 5984: ```yaml diff --git a/collectors/python.d.plugin/dns_query_time/README.md b/collectors/python.d.plugin/dns_query_time/README.md index ebf34a3d6e..b3575f1ae0 100644 --- a/collectors/python.d.plugin/dns_query_time/README.md +++ b/collectors/python.d.plugin/dns_query_time/README.md @@ -8,6 +8,16 @@ This module provides DNS query time statistics. It produces one aggregate chart or one chart per DNS server, showing the query time. +## Configuration + +Edit the `python.d/dns_query_time.conf` configuration file using `edit-config` from the your agent's [config +directory](../../../docs/step-by-step/step-04.md#find-your-netdataconf-file), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different, if different +sudo ./edit-config python.d/dns_query_time.conf +``` + --- [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fpython.d.plugin%2Fdns_query_time%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>) diff --git a/collectors/python.d.plugin/dnsdist/README.md b/collectors/python.d.plugin/dnsdist/README.md index 4310fe28a2..8c5fdef4aa 100644 --- a/collectors/python.d.plugin/dnsdist/README.md |