Change all refs from service to systemctl (#10703)

9 files changed, 24 insertions, 14 deletions

diff --git a/collectors/QUICKSTART.md b/collectors/QUICKSTART.md
index a691ffc4c3..809ec18af8 100644
--- a/collectors/QUICKSTART.md
+++ b/collectors/QUICKSTART.md
@@ -104,8 +104,8 @@ parameters as a reference, to configure the collector.
 Most collectors are enabled and will auto-detect their app/service without manual configuration. However, you need to
 restart Netdata to trigger the auto-detection process.
 
-To restart Netdata on most systems, use `service netdata restart`. For other systems, see the [other restart
-methods](/docs/getting-started.md#start-stop-and-restart-netdata).
+To restart Netdata on most systems, use `sudo systemctl restart netdata`, or the [appropriate
+method](/docs/configure/start-stop-restart.md) for your system.
 
 Open Netdata's dashboard in your browser, or refresh the page if you already have it open. You should now see a new
 entry in the menu and new interactive charts!
diff --git a/collectors/python.d.plugin/README.md b/collectors/python.d.plugin/README.md
index a05bc81dd8..312986e48a 100644
--- a/collectors/python.d.plugin/README.md
+++ b/collectors/python.d.plugin/README.md
@@ -84,7 +84,12 @@ If you plan to submit the module in a PR, make sure and go through the [PR check
 For a quick start, you can look at the [example
 plugin](https://raw.githubusercontent.com/netdata/netdata/master/collectors/python.d.plugin/example/example.chart.py).
 
-**Note**: If you are working 'locally' on a new collector and would like to run it in an already installed and running Netdata (as opposed to having to install Netdata from source again with your new changes) to can copy over the relevant file to where Netdata expects it and then either `sudo service netdata restart` to have it be picked up and used by Netdata or you can just run the updated collector in debug mode by following a process like below (this assumes you have [installed Netdata from a GitHub fork](https://learn.netdata.cloud/docs/agent/packaging/installer/methods/manual) you have made to do your development on).
+**Note**: If you are working 'locally' on a new collector and would like to run it in an already installed and running
+Netdata (as opposed to having to install Netdata from source again with your new changes) to can copy over the relevant
+file to where Netdata expects it and then either `sudo systemctl restart netdata` to have it be picked up and used by
+Netdata or you can just run the updated collector in debug mode by following a process like below (this assumes you have
+[installed Netdata from a GitHub fork](https://learn.netdata.cloud/docs/agent/packaging/installer/methods/manual) you
+have made to do your development on).
 
 ```bash
 # clone your fork (done once at the start but shown here for clarity)
diff --git a/collectors/python.d.plugin/adaptec_raid/README.md b/collectors/python.d.plugin/adaptec_raid/README.md
index b14e8f9bac..4e99508b32 100644
--- a/collectors/python.d.plugin/adaptec_raid/README.md
+++ b/collectors/python.d.plugin/adaptec_raid/README.md
@@ -60,8 +60,8 @@ cd /etc/netdata   # Replace this path with your Netdata config directory, if dif
 sudo ./edit-config python.d.conf
 ```
 
-Change the value of the `adaptec_raid` setting to `yes`. Save the file and restart the Netdata Agent
-with `sudo systemctl restart netdata`, or the appropriate method for your system.
+Change the value of the `adaptec_raid` setting to `yes`. Save the file and restart the Netdata Agent with `sudo
+systemctl restart netdata`, or the [appropriate method](/docs/configure/start-stop-restart.md) for your system.
 
 ## Configuration
 
diff --git a/collectors/python.d.plugin/alarms/README.md b/collectors/python.d.plugin/alarms/README.md
index ea96061cc7..7bd19af897 100644
--- a/collectors/python.d.plugin/alarms/README.md
+++ b/collectors/python.d.plugin/alarms/README.md
@@ -23,7 +23,7 @@ Below is an example of the chart produced when running `stress-ng --all 2` for a
 
 ## Configuration
 
-Enable the collector and restart Netdata.
+Enable the collector and [restart Netdata](/docs/configure/start-stop-restart.md).
 
 ```bash
 cd /etc/netdata/
diff --git a/collectors/python.d.plugin/anomalies/README.md b/collectors/python.d.plugin/anomalies/README.md
index 862f4f345c..bcbfdbcd73 100644
--- a/collectors/python.d.plugin/anomalies/README.md
+++ b/collectors/python.d.plugin/anomalies/README.md
@@ -45,7 +45,8 @@ pip3 install --user netdata-pandas==0.0.32 numba==0.50.1 scikit-learn==0.23.2 py
 
 ## Configuration
 
-Install the Python requirements above, enable the collector and restart Netdata.
+Install the Python requirements above, enable the collector and [restart
+Netdata](/docs/configure/start-stop-restart.md).
 
 ```bash
 cd /etc/netdata/
diff --git a/collectors/python.d.plugin/chrony/README.md b/collectors/python.d.plugin/chrony/README.md
index b1e7ec35c0..4681b4f6d5 100644
--- a/collectors/python.d.plugin/chrony/README.md
+++ b/collectors/python.d.plugin/chrony/README.md
@@ -55,7 +55,7 @@ local:
   command: 'chronyc -n tracking'
 ```
 
-Save the file and restart the Netdata Agent with `sudo systemctl restart netdata`, or the appropriate method for your
-system, to finish configuring the `chrony` collector.
+Save the file and restart the Netdata Agent with `sudo systemctl restart netdata`, or the [appropriate
+method](/docs/configure/start-stop-restart.md) for your system, to finish configuring the `chrony` collector.
 
 [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fpython.d.plugin%2Fchrony%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)
diff --git a/collectors/python.d.plugin/hpssa/README.md b/collectors/python.d.plugin/hpssa/README.md
index af8c4378e9..69c8d8a33c 100644
--- a/collectors/python.d.plugin/hpssa/README.md
+++ b/collectors/python.d.plugin/hpssa/README.md
@@ -59,8 +59,8 @@ cd /etc/netdata   # Replace this path with your Netdata config directory, if dif
 sudo ./edit-config python.d.conf
 ```
 
-Change the value of the `hpssa` setting to `yes`. Save the file and restart the Netdata Agent
-with `sudo systemctl restart netdata`, or the appropriate method for your system.
+Change the value of the `hpssa` setting to `yes`. Save the file and restart the Netdata Agent with `sudo systemctl
+restart netdata`, or the [appropriate method](/docs/configure/start-stop-restart.md) for your system.
 
 ## Configuration
 
@@ -78,4 +78,7 @@ If `ssacli` cannot be found in the `PATH`, configure it in `hpssa.conf`.
 ssacli_path: /usr/sbin/ssacli
 ```
 
+Save the file and restart the Netdata Agent with `sudo systemctl restart netdata`, or the [appropriate
+method](/docs/configure/start-stop-restart.md) for your system.
+
 [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fpython.d.plugin%2Fhpssa%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()
diff --git a/collectors/python.d.plugin/megacli/README.md b/collectors/python.d.plugin/megacli/README.md
index 4fb7eb1c20..e411c4c112 100644
--- a/collectors/python.d.plugin/megacli/README.md
+++ b/collectors/python.d.plugin/megacli/README.md
@@ -80,6 +80,7 @@ Battery stats disabled by default. To enable them, modify `megacli.conf`.
 do_battery: yes
 ```
 
----
+Save the file and restart the Netdata Agent with `sudo systemctl restart netdata`, or the [appropriate
+method](/docs/configure/start-stop-restart.md) for your system.
 
 [![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fcollectors%2Fpython.d.plugin%2Fmegacli%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)
diff --git a/collectors/python.d.plugin/samba/README.md b/collectors/python.d.plugin/samba/README.md
index a5126510f7..04cb7dcf73 100644
--- a/collectors/python.d.plugin/samba/README.md
+++ b/collectors/python.d.plugin/samba/README.md
@@ -103,8 +103,8 @@ cd /etc/netdata   # Replace this path with your Netdata config directory, if dif
 sudo ./edit-config python.d.conf
 ```
 
-Change the value of the `samba` setting to `yes`. Save the file and restart the Netdata Agent
-with `sudo systemctl restart netdata`, or the appropriate method for your system.
+Change the value of the `samba` setting to `yes`. Save the file and restart the Netdata Agent with `sudo systemctl
+restart netdata`, or the [appropriate method](/docs/configure/start-stop-restart.md) for your system.
 
 ## Configuration