diff options
Diffstat (limited to 'lib/gmock-1.7.0/gtest/build-aux/ltmain.sh')
| -rw-r--r-- | lib/gmock-1.7.0/gtest/build-aux/ltmain.sh | 9661 |
1 files changed, 0 insertions, 9661 deletions
diff --git a/lib/gmock-1.7.0/gtest/build-aux/ltmain.sh b/lib/gmock-1.7.0/gtest/build-aux/ltmain.sh deleted file mode 100644 index c2852d8561..0000000000 --- a/lib/gmock-1.7.0/gtest/build-aux/ltmain.sh +++ /dev/null @@ -1,9661 +0,0 @@ - -# libtool (GNU libtool) 2.4.2 -# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --no-quiet, --no-silent -# print informational messages (default) -# --no-warn don't display warning messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print more informational messages than default -# --no-verbose don't print the extra informational messages -# --version print version information -# -h, --help, --help-all print short, long, or detailed help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. When passed as first option, -# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1ubuntu1 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to <bug-libtool@gnu.org>. -# GNU libtool home page: <http://www.gnu.org/software/libtool/>. -# General help using GNU software: <http://www.gnu.org/gethelp/>. - -PROGRAM=libtool -PACKAGE=libtool -VERSION="2.4.2 Debian-2.4.2-1ubuntu1" -TIMESTAMP="" -package_revision=1.3337 - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' -} - -# NLS nuisances: We save the old values to restore during execute mode. -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" - fi" -done -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL - -$lt_unset CDPATH - - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - - - -: ${CP="cp -f"} -test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" - -dirname="s,/[^/]*$,," -basename="s,^.*/,," - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} # func_dirname may be replaced by extended shell implementation - - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "${1}" | $SED "$basename"` -} # func_basename may be replaced by extended shell implementation - - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` -} # func_dirname_and_basename may be replaced by extended shell implementation - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname may be replaced by extended shell implementation - - -# These SED scripts presuppose an absolute path with a trailing slash. -pathcar='s,^/\([^/]*\).*$,\1,' -pathcdr='s,^/[^/]*,,' -removedotparts=':dotsl - s@/\./@/@g - t dotsl - s,/\.$,/,' -collapseslashes='s@/\{1,\}@/@g' -finalslash='s,/*$,/,' - -# func_normal_abspath PATH -# Remove doubled-up and trailing slashes, "." path components, -# and cancel out any ".." path components in PATH after making -# it an absolute path. -# value returned in "$func_normal_abspath_result" -func_normal_abspath () -{ - # Start from root dir and reassemble the path. - func_normal_abspath_result= - func_normal_abspath_tpath=$1 - func_normal_abspath_altnamespace= - case $func_normal_abspath_tpath in - "") - # Empty path, that just means $cwd. - func_stripname '' '/' "`pwd`" - func_normal_abspath_result=$func_stripname_result - return - ;; - # The next three entries are used to spot a run of precisely - # two leading slashes without using negated character classes; - # we take advantage of case's first-match behaviour. - ///*) - # Unusual form of absolute path, do nothing. - ;; - //*) - # Not necessarily an ordinary path; POSIX reserves leading '//' - # and for example Cygwin uses it to access remote file shares - # over CIFS/SMB, so we conserve a leading double slash if found. - func_normal_abspath_altnamespace=/ - ;; - /*) - # Absolute path, do nothing. - ;; - *) - # Relative path, prepend $cwd. - func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath - ;; - esac - # Cancel out all the simple stuff to save iterations. We also want - # the path to end with a slash for ease of parsing, so make sure - # there is one (and only one) here. - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` - while :; do - # Processed it all yet? - if test "$func_normal_abspath_tpath" = / ; then - # If we ascended to the root using ".." the result may be empty now. - if test -z "$func_normal_abspath_result" ; then - func_normal_abspath_result=/ - fi - break - fi - func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcar"` - func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ - -e "$pathcdr"` - # Figure out what to do with it - case $func_normal_abspath_tcomponent in - "") - # Trailing empty path component, ignore it. - ;; - ..) - # Parent dir; strip last assembled component from result. - func_dirname "$func_normal_abspath_result" - func_normal_abspath_result=$func_dirname_result - ;; - *) - # Actual path component, append it. - func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent - ;; - esac - done - # Restore leading double-slash if one was found on entry. - func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result -} - -# func_relative_path SRCDIR DSTDIR -# generates a relative path from SRCDIR to DSTDIR, with a trailing -# slash if non-empty, suitable for immediately appending a filename -# without needing to append a separator. -# value returned in "$func_relative_path_result" -func_relative_path () -{ - func_relative_path_result= - func_normal_abspath "$1" - func_relative_path_tlibdir=$func_normal_abspath_result - func_normal_abspath "$2" - func_relative_path_tbindir=$func_normal_abspath_result - - # Ascend the tree starting from libdir - while :; do - # check if we have found a prefix of bindir - case $func_relative_path_tbindir in - $func_relative_path_tlibdir) - # found an exact match - func_relative_path_tcancelled= - break - ;; - $func_relative_path_tlibdir*) - # found a matching prefix - func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" - func_relative_path_tcancelled=$func_stripname_result - if test -z "$func_relative_path_result"; then - func_relative_path_result=. - fi - break - ;; - *) - func_dirname $func_relative_path_tlibdir - func_relative_path_tlibdir=${func_dirname_result} - if test "x$func_relative_path_tlibdir" = x ; then - # Have to descend all the way to the root! - func_relative_path_result=../$func_relative_path_result - func_relative_path_tcancelled=$func_relative_path_tbindir - break - fi - func_relative_path_result=../$func_relative_path_result - ;; - esac - done - - # Now calculate path; take care to avoid doubling-up slashes. - func_stripname '' '/' "$func_relative_path_result" - func_relative_path_result=$func_stripname_result - func_stripname '/' '/' "$func_relative_path_tcancelled" - if test "x$func_stripname_result" != x ; then - func_relative_path_result=${func_relative_path_result}/${func_stripname_result} - fi - - # Normalisation. If bindir is libdir, return empty string, - # else relative path ending with a slash; either way, target - # file name can be directly appended. - if test ! -z "$func_relative_path_result"; then - func_stripname './' '' "$func_relative_path_result/" - func_relative_path_result=$func_stripname_result - fi -} - -# The name of this program: -func_dirname_and_basename "$progpath" -progname=$func_basename_result - -# Make sure we have an absolute path for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=$func_dirname_result - progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" - ;; - *) - save_IFS="$IFS" - IFS=${PATH_SEPARATOR-:} - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break - done - IFS="$save_IFS" - test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution that turns a string into a regex matching for the -# string literally. -sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' - -# Sed substitution that converts a w32 file name or path -# which contains forward slashes, into one that contains -# (escaped) backslashes. A very naive implementation. -lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" - -# Standard options: -opt_dry_run=false -opt_help=false -opt_quiet=false -opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }$*" -} - -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 -} - -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -} - -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default - - -# func_grep expression filename -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_mkdir_p directory-path -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - my_directory_path="$1" - my_dir_list= - - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then - - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" - - # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` - done - my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : - done - IFS="$save_mkdir_p_IFS" - - # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" - fi -} - - -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () -{ - my_template="${TMPDIR-/tmp}/${1-$progname}" - - if test "$opt_dry_run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" - else - - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" - - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi - - $ECHO "$my_tmpdir" -} - - -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () -{ - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac - - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac -} - - -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "$1" | $SED \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac - - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac - - func_quote_for_expand_result="$my_arg" -} - - -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - -# func_tr_sh -# Turn $1 into a string suitable for a shell variable name. -# Result is stored in $func_tr_sh_result. All characters -# not in the set a-zA-Z0-9_ are replaced with '_'. Further, -# if $1 begins with a digit, a '_' is prepended as well. -func_tr_sh () -{ - case $1 in - [0-9]* | *[!a-zA-Z0-9_]*) - func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` - ;; - * ) - func_tr_sh_result=$1 - ;; - esac -} - - -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $opt_debug - - $SED -n '/(C)/!b go - :more - /\./!{ - N - s/\n# / / - b more - } - :go - /^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} - -# func_usage -# Echo short help message to standard output and exit. -func_usage () -{ - $opt_debug - - $SED -n '/^# Usage:/,/^# *.*--help/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - echo - $ECHO "run \`$progname --help | more' for full usage" - exit $? -} - -# func_help [NOEXIT] -# Echo long help message to standard output and exit, -# unless 'noexit' is passed as argument. -func_help () -{ - $opt_debug - - $SED -n '/^# Usage:/,/# Report bugs to/ { - :print - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ - p - d - } - /^# .* home page:/b print - /^# General help using/b print - ' < "$progpath" - ret=$? - if test -z "$1"; then - exit $ret - fi -} - -# func_missing_arg argname -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - $opt_debug - - func_error "missing argument for $1." - exit_cmd=exit -} - - -# func_split_short_opt shortopt -# Set func_split_short_opt_name and func_split_short_opt_arg shell -# variables after splitting SHORTOPT after the 2nd character. -func_split_short_opt () -{ - my_sed_short_opt='1s/^\(..\).*$/\1/;q' - my_sed_short_rest='1s/^..\(.*\)$/\1/;q' - - func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` - func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` -} # func_split_short_opt may be replaced by extended shell implementation - - -# func_split_long_opt longopt -# Set func_split_long_opt_name and func_split_long_opt_arg shell -# variables after splitting LONGOPT at the `=' sign. -func_split_long_opt () -{ - my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' - my_sed_long_arg='1s/^--[^=]*=//' - - func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` - func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` -} # func_split_long_opt may be replaced by extended shell implementation - -exit_cmd=: - - - - - -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" - -# Global variables. -nonopt= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "${1}=\$${1}\${2}" -} # func_append may be replaced by extended shell implementation - -# func_append_quoted var value -# Quote VALUE and append to the end of shell variable VAR, separated -# by a space. -func_append_quoted () -{ - func_quote_for_eval "${2}" - eval "${1}=\$${1}\\ \$func_quote_for_eval_result" -} # func_append_quoted may be replaced by extended shell implementation - - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "${@}"` -} # func_arith may be replaced by extended shell implementation - - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` -} # func_len may be replaced by extended shell implementation - - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` -} # func_lo2o may be replaced by extended shell implementation - - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` -} # func_xform may be replaced by extended shell implementation - - -# func_fatal_configuration arg... -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." -} - - -# func_config -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - -# func_features -# Display the features supported by this script. -func_features () -{ - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - - exit $? -} - -# func_enable_tag tagname -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname="$1" - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -# Shorthand for --mode=foo, only valid as the first argument -case $1 in -clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; -compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; -execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; -finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; -install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; -link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; -uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; -esac - - - -# Option defaults: -opt_debug=: -opt_dry_run=false -opt_config=false -opt_preserve_dup_deps=false -opt_features=false -opt_finish=false -opt_help=false -opt_help_all=false -opt_silent=: -opt_warning=: -opt_verbose=: -opt_silent=false -opt_verbose=false - - -# Parse options once, thoroughly. This comes as soon as possible in the -# script to make things like `--version' happen as quickly as we can. -{ - # this just eases exit handling - while test $# -gt 0; do - opt="$1" - shift - case $opt in - --debug|-x) opt_debug='set -x' - func_echo "enabling shell trace mode" - $opt_debug - ;; - --dry-run|--dryrun|-n) - opt_dry_run=: - ;; - --config) - opt_config=: -func_config - ;; - --dlopen|-dlopen) - optarg="$1" - opt_dlopen="${opt_dlopen+$opt_dlopen -}$optarg" - shift - ;; - --preserve-dup-deps) - opt_preserve_dup_deps=: - ;; - --features) - opt_features=: -func_features - ;; - --finish) - opt_finish=: -set dummy --mode finish ${1+"$@"}; shift - ;; - --help) - opt_help=: - ;; - --help-all) - opt_help_all=: -opt_help=': help-all' - ;; - --mode) - test $# = 0 && func_missing_arg $opt && break |